Dynamic deformation and damage in cast γ-TiAl during taylor cylinder impact: Experiments and model validation
Source abstract
Abstract
The dynamic deformation, damage evolution, and cracking in four cast gamma titanium aluminide alloys have been investigated experimentally and theoretically. In this study, the dynamic compressive constitutive properties of several cast TiAl alloys were measured at quasi-static and dynamic rates. Using the measured high-strain-rate constitutive properties, the deformation, damage evolution, and postmortem specimen geometries observed in Taylor cylinder experiments were predicted using the mechanical threshold stress (MTS) constitutive model. The utility of the Taylor impact test for validation of high-rate constitutive models for intermetallics is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Intermetallics and Advanced Alloy Properties · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. P.S. Steif, M.P. Rubal, G.T. Gray III, and J.M. Pereira: J. Mech. Phys. Solids, 1998, vol. 46, pp. 2069–86.10.1016/S0022-5096(98)00023-4 ↗
2. P.S. Steif, J.W. Jones, T. Harding, M.P. Rubal, V.Z. Gandelsman, N. Beiry, and T.M. Pollock: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 435–52.
3. T. Harding, J.W. Jones, T.M. Pollock, and P.S. Steif: Scripta Metall. Mater., 1999, vol. 40, pp. 445–49.10.1016/S1359-6462(98)00466-7 ↗
4. T.S. Harding and J.W. Jones: Scripta Metall. Mater., 2000, vol. 42, pp. 129–35.10.1016/S1359-6462(99)00319-X ↗
5. T.S. Harding and J.W. Jones: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1741–52.10.1007/s11661-998-0329-1 ↗
6. S.A. Maloy and G.T. Gray III: in Gamma Titanium Aluminides, Y.W. Kim, and R. Wagner, eds., TMS, Warrendale, PA, 1995, pp. 307–14.
7. G.T. Gray III: J. Phys. IV, 1994, vol. C8, pp. 373–78.
8. S.A. Maloy and G.T. Gray III: Acta Mater., 1996, vol. 44, pp. 1741–56.10.1016/1359-6454(95)00329-0 ↗
9. G.T. Gray III: in Deformation and Fracture of Ordered Intermetallic Materials III, W.O. Soboyejo, T.S. Srivatsan, and H.L. Fraser, eds., TMS, Warrendale, PA, 1996, pp. 57–73.
10. Z. Jin, C.M. Cady, G.T. Gray III, and Y.W. Kim: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1007–16.10.1007/s11661-000-0042-1 ↗
11. S.R. Chen and G.T. Gray III: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2994–3006.10.1007/BF02663849 ↗
12. G.I. Taylor: Proc. R. Soc. London A, 1948, vol. 194, pp. 289–99.10.1098/rspa.1948.0081 ↗
13. P.J. Maudlin, G.T. Gray III, C.M. Cady, and G.C. Kaschner: Phil. Trans. R. Soc. A, 1999, vol. 357, pp. 1707–07.10.1098/rsta.1999.0397 ↗
14. P.J. Maudlin, J.F. Bingert, J.W. House, and S.R. Chen: Int. J. Plast., 1999, vol. 15, pp. 139–66.10.1016/S0749-6419(98)00058-8 ↗
15. N. Biery, M. DeGraef, J. Beuth, R. Raban, A. Elliott, C. Austin, and T.M. Pollock: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3127–36.10.1007/s11661-002-0298-8 ↗
16. G.T. Gray III: ASM Handbook—Mechanical Testing and Evaluation, ASM INTERNATIONAL, Materials Park, OH, 2000, vol. 8, pp. 462–76.
17. P.S. Follansbee and U.F. Kocks: Acta Metall., 1988, vol. 36, pp. 81–93.10.1016/0001-6160(88)90030-2 ↗
18. U.F. Kocks: J. Eng. Mater. Tech., Trans. ASME, 1976, vol. 98, pp. 76–85.10.1115/1.3443340 ↗
19. P. Hassen: Phil. Mag., 1958, vol. 3, pp. 384–418.10.1080/14786435808236826 ↗
20. G.R. Johnson, R.A. Stryk, T.J. Holmquist, and S.R. Beissel: “User Instructions for the 1997 Version of the EPIC Code,” Eglin Air Force Base Report No. WL-TR-1997-7037, Wright Laboratory, WPAFB, OH, Armament Directorate, 1997.
21. V.K. Vasudevan, S.A. Court, P. Kurath, and H.L. Fraser: Scripta Metall., 1989, vol. 23, pp. 907–12.10.1016/0036-9748(89)90269-X ↗
22. M. Lu and K.T. Hemker: Acta Mater., 1997, vol. 45, pp. 3573–85.10.1016/S1359-6454(97)00075-X ↗
23. J.F. Bingert, T.A. Mason, G.C. Kaschner, P.J. Maudlin, and G.T. Gray III: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 955–63.10.1007/s11661-002-0165-7 ↗
24. V.T. McKenna, M.P. Rubal, P.S. Steif, J.M. Pereira, and G.T. Gray III: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 581–89.10.1007/s11661-002-0120-7 ↗
25. S. Basu and R. Narasimham: J. Mech. Phys. Solids, 2002, 2000, vol. 48, pp. 1967–85.10.1016/S0022-5096(99)00078-2 ↗
26. G.T. Gray III, P.S. Steif, and T.M. Pollock: in Structural Intermetallics 2001, K.J. Hemker, D.K. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 269–77.