journal article·2017-03

Effect of Alloying Elements on Nano-ordered Wear Property of Magnesium Alloys

Takahiro Yagi, Tomoko Hirayama, Takashi Matsuoka, Hidetoshi Somekawa

Publisher page

Abstract

The effect of alloying elements on nano-ordered wear properties was investigated using fine-grained pure magnesium and several types of 0.3 at. pct X (X = Ag, Al, Ca, Li, Mn, Y, and Zn) binary alloys. They had an average grain size of 3 to 5 μm and a basal texture due to their production by the extrusion process. The specific wear rate was influenced by the alloying element; the Mg-Ca and Mg-Mn alloys showed the best and worst wear property, respectively, among the present alloying elements, which was the same trend as that for indentation hardness. Deformed microstructural observations revealed no formation of deformation twins, because of the high activation of grain boundary-induced plasticity. On the contrary, according to scratched surface observations, when grain boundary sliding partially contributed to deformation, these alloys had large specific wear rates. These results revealed that the wear property of magnesium alloys was closely related to the plastic deformation mechanism. The prevention of grain boundary sliding is important to improve the wear property, which is the same as that of a large-scale wearing configuration. One of the influential factors is the change in the lattice parameter with the chemical composition, i.e., ∂(c/a)/∂C. An alloying element that has a large value of ∂(c/a)/∂C effectively enhances the wear property.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. [1] H. Chen, A. T. Alpas; Wear, 2000, vol.246, pp.106-116.10.1016/S0043-1648(00)00495-6 ↗
2. [2] S. Das, A. T. Morales, A. T. Alpas; Wear, 2010, vol.268, pp.94-103.10.1016/j.wear.2009.07.001 ↗
3. [3] S. Anbuselvan, S. Ramanathan; Mater Sci Eng A, 2010, vol.527, pp.1815-1820.10.1016/j.msea.2009.11.017 ↗
4. [4] C. Y. H. Lim, S. C. Lim, M. Gupta; Wear, 2003, vol.255, pp.629-637.10.1016/S0043-1648(03)00121-2 ↗
5. [5] A. El-Morsy; Mater Sci Eng A, 2008, vol.473, pp.330-335.10.1016/j.msea.2007.03.096 ↗
6. [6] P. Poddar, A. Das, K. L. Sahoo; Metal Mater Trans, 2014, vol.45A, pp.2270-2283.10.1007/s11661-013-2146-4 ↗
7. [7] T. J. Chen, Y. Ma, B. Li, Y. D. Li, Y. Hao; Mater Sci Eng A, 2007, vol.445, pp.477-485.10.1016/j.msea.2006.09.112 ↗
8. [8] C. Taltavull, B. Torres, A. J. Lopez, J. Ramz; Wear, 2013, vol.301, pp.615-625.10.1016/j.wear.2012.11.039 ↗
9. [9] W. Guo, Q. Wang, X. Li, H. Zhou, L. Zhang, W. Liao, J Mater Eng Perform, 2015, vol.24, pp.2774-2778.10.1007/s11665-015-1548-4 ↗
10. [10] R. Yoshioka, T. Matsuoka, K. Sakaguchi, T. Mukai, A. Murata; J Soc Mater Sci, 2003, vol.52, pp.702-708.10.2472/jsms.52.702 ↗
11. [11] H. Somekawa, S. Maeda, T. Hirayama, T. Matsuoka, T. Inoue, T. Mukai; Mater Sci Eng A, 2013, vol.561, pp.371-377.10.1016/j.msea.2012.10.034 ↗
12. [12] H. Somekawa, A. Shimoda, T. Hirayama, T. Matsuoka, T. Mukai; Mater Trans, 2014, vol.55, pp.216-219.10.2320/matertrans.M2013301 ↗
13. 13.Ngnyen QB, Sim YHM, Gupta M, Lim CYH (2014) Tribo Int 82: 464–47110.1016/j.triboint.2014.02.024 ↗
14. [14] A. Boby, A. Srinivasan, U. T. S. Pillai, B. C. Pai; Metal Mater Trans, 2015, vol.46A, pp.4234-4243.10.1007/s11661-015-3013-2 ↗
15. [15] T. Itoi, K. Gonda, M. Hirohashi; Wear, 2011, vol.270, pp.606-612.10.1016/j.wear.2011.01.018 ↗
16. [16] Y. Niu, R. Cui, Y. He, Z. Yu; J Alloys Compd., 2014, vol.610, pp.294-300.10.1016/j.jallcom.2014.05.021 ↗
17. P. Nautiyal, J. Jain, and A. Agarwal: Tribol. Lett., 2016, vol.61, art no. 29 (7 pages).10.1007/s11249-016-0649-z ↗
18. [18] A. Alahelisten, F. Bergman, M. Olsson, S. Hogmark; Wear, 1993, vol.165, pp.221-226.10.1016/0043-1648(93)90338-M ↗
19. [19] C. Y. H. Lim, D. K. Lee, J. J. S. Ang, M. Gupta; Wear, 2005, vol.259, pp.620-625.10.1016/j.wear.2005.02.006 ↗
20. [20] Y. Zhang, S. Yu, Y. Luo, H. Hu; Mater Sci Eng A, 2008, vol.472, pp.59-65.10.1016/j.msea.2007.03.006 ↗
21. [21] H. R. J. Nodooshan, W. Liu, G. Wu, W. Ding, R. Mahmudi; J Mater Res, 2016, vol.38, pp.1133-1144.10.1557/jmr.2016.113 ↗
22. [22] M. Nouri, X. G. Sun, D. Y. Li; Tribo Int, 2013, vol.67, pp.154-163.10.1016/j.triboint.2013.07.012 ↗
23. [23] K. K. Ajith Kumar, U. T. S. Pillai, B. C. Pai, M. Chakraborty; Wear, 2013, vol.303, pp.56-64.10.1016/j.wear.2013.02.020 ↗
24. [24] K. Sikdar, S. Shekhar, K. Balani; Wear, 2014, vol.318, pp.177-187.10.1016/j.wear.2014.06.012 ↗
25. [25] H. Li, D. Liu, Y. Zhao, F. Jin, M. Chen; J Mater Eng Perform, 2016, vol.25, pp.3890-3895.10.1007/s11665-016-2207-0 ↗
26. [26] A. Akhtar, E. Teghtsoonian; Acta Metall, 1969, vol.17, pp.1339-1349.10.1016/0001-6160(69)90151-5 ↗
27. [27] H. Yoshinaga, R. Horiuchi; Mater Trans JIM, 1963, vol.4, pp.134-141.10.2320/matertrans1960.4.134 ↗
28. [28] R. E. Reed-Hill, W. D. Robertson; Acta Metall, 1957, vol.5, pp.728-735.10.1016/0001-6160(57)90075-5 ↗
29. [29] T. J. Rupert, C. A. Schuh; Acta Mater, 2010, vol.58, pp.4137-4148.10.1016/j.actamat.2010.04.005 ↗
30. [30] Z. N. Farhat, Y. Ding, D. O. Northwood, A. T. Aplas; Mater Sci Eng A, 1996, vol.206, pp.302-313.10.1016/0921-5093(95)10016-4 ↗
31. [31] B. Yao, Z. Han, Y. S. Li, N. R. Tao, K. Lu; Wear, 2011, vol.271, pp.1609-1616.10.1016/j.wear.2010.12.020 ↗
32. [32] D. H. Jeong, U. Erb, K. T. Aust, G. Palumbo; Scripta Mater, 2003, vol.43, 1067-1072.10.1016/S1359-6462(02)00633-4 ↗
33. [33] C. A. Schuh; Mater Today, 2006, vol.9, pp.32-40.10.1016/S1369-7021(06)71495-X ↗
34. [34] J. H. Shin, S. H. Kim, T. K. Ha, K. H. Oh, I. S. Choi, H. N. Han; Scripta Mater, 2013, vol.68, pp.483-486.10.1016/j.scriptamat.2012.11.030 ↗
35. [35] D. Catoor, Y. F. Gao, J. Geng, M. J. N. V. Prasad, E. G. Herbert, K. S. Kumar, G. M. Pharr, E. P. Gorge; Acta Mater, 2013, vol.61, pp.2953-2965.10.1016/j.actamat.2013.01.055 ↗
36. [36] H. Kitahara, T. Mayama, K. Okumura, Y. Tadano, M. Tsushida, S. Ando; Acta Mater, 2014, vol.78, pp.290-300.10.1016/j.actamat.2014.06.039 ↗
37. [37] C. Zambaldi, C. Zehnder, D. Rabbe; Acta Mater, 2015, vol.91, pp.267-288.10.1016/j.actamat.2015.01.046 ↗
38. [38] H. Somekawa, C. A. Schuh; Scripta Mater, 2013, vol.68, pp.416-419.10.1016/j.scriptamat.2012.11.010 ↗
39. 39.Somekawa H, Schuh CA (2016) Metall. Mater. Trans. A 47A:3234–3241
40. [40] T. Guo, F. Siska, M. R. Barnett; Scripta Mater, 2016, vol.110, pp.10-13.10.1016/j.scriptamat.2015.07.034 ↗
41. [41] J. Ye, R. K. Mishra, A. K. Sachdev, A. M. Minor, Scripta Mater, 2011, vol.64, pp.292-295.10.1016/j.scriptamat.2010.09.047 ↗
42. [42] S. Sanchex-Martin, M. T. Perex-Prado, J. Serurado, J. Bohlen, I. Gutierrez-Urrutia, J. Llorca, J. M. Molina-Aldareguia; Acta Mater, 2014, vol.71, pp.283-292.10.1016/j.actamat.2014.03.014 ↗
43. [43] R. Sanchez-Martin, C. Zambaldi, M. T. Perz-Prado, J. M. Molian-Aldareguia; Scripta Mater, 2015, vol.104, pp.9-12.10.1016/j.scriptamat.2015.03.012 ↗
44. [44] H. Somekawa, K. Tomita, M. Toda, T. Hirayama, T. Matsuoka; Metal Mater Trans, 2015, vol.46A, pp.4351-4359.10.1007/s11661-015-2989-y ↗
45. [45] M. Haghsenas, Y. Bhakhri, R. Ouiasuyi, R. J. Klassen; MRS Com, 2015, vol.5, pp.513-518.10.1557/mrc.2015.57 ↗
46. [46] H. Somekawa, C. A. Schuh; Acta Mater, 2011, vol.59, pp.7554-7563.10.1016/j.actamat.2011.08.047 ↗
47. [47] H. Somekawa, T. Inoue, K. Tsuzaki; Philo Mag, 2013, vol.93 pp.4582-4592.10.1080/14786435.2013.838008 ↗
48. [48] B. J. Briscoe, P. S. Thomas; Trib Trans, 1995, vol.38, pp.382-388.10.1080/10402009508983418 ↗
49. [49] C. Gauthier, R. Schirrer; J Mater Sci, 2000, vol.35, pp.2121-2130.10.1023/A:1004798019914 ↗
50. [50] W. C. Oliver, G. M. Pharr; J Mater Res, 1992, vol.7, pp.1564-1574.10.1557/JMR.1992.1564 ↗
51. [51] T. B. Massalski; Binary phase diagrams, ASM International, Materials Park, OH, 1990.
52. [52] M. M. Avedesian and H. Baker; ASM Specialty Handbook, Magnesium and magnesium alloys, ASM International, Materials Park, OH, 1999.
53. [53] J. F. Archard; J. Appl Phys, 1953, vol.24, pp.981-988.10.1063/1.1721448 ↗
54. [54] W. F. Gale, T. C. Totemeier; Smithells metals reference book, 8th edition, Elsevier, Oxford, 2004.
55. [55] J. W. Christian, S. Mahajan; Prog Mater Sci, 1995, vol.39, pp.1-157.10.1016/0079-6425(94)00007-7 ↗
56. [56] J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, K. Higashi; Acta Mater, 2003, vol.51, pp.2055-2065.10.1016/S1359-6454(03)00005-3 ↗
57. [57] H. Somekawa, C. A. Schuh; J Mater Res, 2012, vol.27, pp.1295-1302.10.1557/jmr.2012.52 ↗
58. [58] C. L. Wang, T. Mukai, T. G. Nieh; J Mater Res, 2009, vol.24, pp.1615-1619.10.1557/jmr.2009.0187 ↗
59. [59] J. Koike; Metal Mater Trans, 2005, vol.36A, pp.1689-1696.10.1007/s11661-005-0032-4 ↗
60. [60] J. Koike, R. Ohyama, T. Kobayashi, M. Suzuki, K. Maruyama; Mater Trans, 2003, vol.44, pp.445-451.10.2320/matertrans.44.445 ↗
61. [61] H. Somekawa, T. Mukai; Philo Mag Lett. 2010. Vol.90, pp.883-890.10.1080/09500839.2010.514577 ↗
62. [62] H. Somekawa, T. Mukai; Metal Mater Trans, 2015, vol.46A, pp.894-902.10.1007/s11661-014-2641-2 ↗
63. [63] H. J. Frost, M. F. Ashby; Deformation mechanism map, Pergaman Press, Oxford, 1982.
64. [64] H. Somekawa, H. Watanabe, T. Mukai; Philo Mag, 2014, vol.94, pp.1345-1360.10.1080/14786435.2014.886021 ↗
65. [65] H. Somekawa, A. Singh, T. Mukai, T. Inoue; Philo Mag, 2016, vol.96, pp.2671-2685.10.1080/14786435.2016.1212174 ↗