Three-Ply Al/Mg/Al Clad Sheets Fabricated by Twin-Roll Casting and Post-treatments (Homogenization, Warm Rolling, and Annealing)
Source abstract
Abstract
When thin Al alloy sheets are clad on to twin-roll-cast Mg alloy melt, inherent drawbacks of Mg alloys such as poor formability, corrosion resistance, and surface quality can be effectively complemented. In this study, three-ply Al/Mg/Al clad sheets were fabricated by twin-roll casting and post-treatments. Brittle interfacial layers composed of γ (Mg17Al12) and β (Mg2Al3) phases were inevitably formed, but their proper thickening during the post-treatments led to improvement of interfacial bonding and resultant tensile properties. In particular, warm rolling was an effective way to modify interfacial microstructures and tensile properties by minimizing deformation inhomogeneity and stress concentration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A.A. Luo: JOM, 2002, vol. 54, pp. 42-48.10.1007/BF02701073 ↗
2. J. Hirsch and T. Al-Samman: Acta Mater., 2013, vol. 61, pp. 818-43.10.1016/j.actamat.2012.10.044 ↗
3. S.-H. Kim, J.-H. Kang, K. Euh and H.-W. Kim: Met. Mater. Int., 2015, vol. 21, pp. 276-85.10.1007/s12540-015-4343-8 ↗
4. N.J. Kim: Mater. Sci. Tech., 2014, vol. 30, pp. 1925-28.10.1179/1743284714Y.0000000596 ↗
5. B.-C. Suh, M.-S. Shim. K.S. Shin and N.J. Kim: Scr. Mater., 2014, vol. 84-85, pp. 1-6.10.1016/j.scriptamat.2014.04.017 ↗
6. E. Aghion and B. Bronfin: Mater. Sci. Forum, 2000, vol. 350-351, pp. 19-30.10.4028/www.scientific.net/MSF.350-351.19 ↗
7. D.H. Kang, D.W. Kim, S. Kim, G.T. Bae, K.H. Kim and N.J. Kim: Scr. Mater., 2009, vol. 61, pp. 768-71.10.1016/j.scriptamat.2009.06.026 ↗
8. S.R. Agnew and Ö. Dyugulu: Int. J. Plast., 2005, vol. 21, pp. 1161-93.10.1016/j.ijplas.2004.05.018 ↗
9. M.-S. Shim, B.-C. Suh, J.H. Kim and N.J. Kim: Met. Mater. Int., 2015, vol. 21, pp. 490-97.10.1007/s12540-015-4589-1 ↗
10. Macwan, X.Q. Jiang and D.L. Chen: JOM, 2015, vol. 67, pp. 1468-77.10.1007/s11837-015-1466-9 ↗
11. K.S. Lee, D.H. Yoon, H.K. Kim, Y.-N. Kwon and Y.-S. Lee: Mater. Sci. Eng. A, 2012, vol. 556, pp. 319-30.10.1016/j.msea.2012.06.094 ↗
12. S.S. Park, Y.S. Park and N.J. Kim: Met. Mater. Int., 2002, vol. 8, pp. 551-54.10.1007/BF03178256 ↗
13. S.S. Park, G.T. Bae, D.H. Kang, I.H. Jung, K.S. Shin and N.J. Kim: Scr. Mater., 2007, vol. 57, pp. 793-96.10.1016/j.scriptamat.2007.07.013 ↗
14. S.S. Park, W.J. Park, C.H. Kim, B.S. You and N.J. Kim: JOM, 2009, vol. 61, pp. 14-18.10.1007/s11837-009-0114-7 ↗
15. D. Liang and C.B. Cowley: JOM, 2004, vol. 56, pp. 26-28.10.1007/s11837-004-0122-6 ↗
16. T. Haga, H. Watari and S. Kumai: J. Achi. Mater. Manu. Eng., 2006, vol. 15, pp. 186-92.
17. J.H. Bae, A.K.P. Rao, K.H. Kim and N.J. Kim: Scr. Mater., 2011, vol. 64, pp. 836-39.10.1016/j.scriptamat.2011.01.013 ↗
18. J.-S. Kim, D.H. Lee, S.-P. Jung, K.S. Lee, K.J. Kim, H.S. Kim, B.-J. Lee, Y.W. Chang, J. Yuh and S. Lee: Sci. Reports, 2016, vol. 6, pp. 1-9.10.1038/s41598-016-0001-8 ↗
19. Macwan, V.K. Patel, X.Q. Jiang, C. Li, S.D. Bhole and D.L. Chen: Mater. Des., 2014, vol. 62, pp. 344-51.10.1016/j.matdes.2014.05.035 ↗
20. L. Xiao and N. Wang: J. Nucl. Mater., 2015, vol. 456, pp. 389-397.10.1016/j.jnucmat.2014.09.022 ↗
21. H. Chang, M. Lu, M. Zhang, A. Atrens and H. Huang: Met. Mater. Int., 2015, vol. 21, pp. 793-98.10.1007/s12540-015-5055-9 ↗
22. K.S. Lee, J.S. Kim, Y.M. Jo, S.E. Lee, J. Heo, Y.W. Chang and Y.S. Lee: Mater. Charact., 2013, vol. 75, pp. 138-49.10.1016/j.matchar.2012.10.012 ↗
23. L.M. Liu, X.J. Liu and S. Liu: Scr. Mater., 2006, vol. 55, pp. 383-86.10.1016/j.scriptamat.2006.04.025 ↗
24. H.-Y. Wu, S. Lee and J.-Y. Wang: J. Mater. Process. Technol., 1998, vol. 75, pp. 173-79.10.1016/S0924-0136(97)00323-3 ↗
25. L.M. Zhao and Z.D. Zhang: Scr. Mater., 2008, vol. 58, pp. 283-86.10.1016/j.scriptamat.2007.10.006 ↗
26. T.C. Chang, J.Y. Wang, Chia-Ming. O, S. Lee: J. Mater. Process Technol., 2003, vol. 140, pp. 588-91.10.1016/S0924-0136(03)00797-0 ↗
27. H. Chen, S.B. Kang, H. Yu, H.W. Kim and G. Min: Mater. Sci. Eng. A, 2008, vol. 492, pp. 317-26.10.1016/j.msea.2008.03.035 ↗
28. X. Huang, K. Suzuki and Y. Chino: J. Alloys Compd., 2011, vol. 509, pp. 4854-60.10.1016/j.jallcom.2011.01.189 ↗
29. Y.H. Kim and W.J. Kim: Met. Mater. Int., 2015, vol. 21, pp. 374-81.10.1007/s12540-015-4338-5 ↗
30. M.T. Pérez-Prado, J.A. del Valle and O.A. Ruano: Scr. Mater., 2004, vol. 51, pp. 1093-97.10.1016/j.scriptamat.2004.07.028 ↗
31. M.T. Pérez-Prado, J.A. del Valle, J.M. Contreras and O.A. Ruano: Scr. Mater., 2004, vol. 50, pp. 661-65.10.1016/j.scriptamat.2003.11.014 ↗
32. K.S. Lee, Y.S. Lee and Y.N. Kwon: Mater. Sci. Eng. A, 2014, vol. 606, pp. 205-13.10.1016/j.msea.2014.03.082 ↗