journal article·2016-12

Predicting Pathways for Synthesis of Ferromagnetic τ Phase in Binary Heusler Alloy Al-55 pct Mn Through Understanding of the Kinetics of ε–τ Transformation

Dhanalakshmi Palanisamy, Shailesh Singh, Chandan Srivastava, Giridhar Madras, Kamanio Chattopadhyay

Publisher page

Abstract

This paper outlines the detailed procedure for the synthesis of pure ferromagnetic tau phase in binary Heusler Al-55 pct Mn alloy in bulk form through casting route without any addition of stabilizers. To obtain the processing domain for the formation of the tau phase from high-temperature epsilon phase, isothermal transformation experiments were carried out. The structure and microstructure were characterized by X-ray diffraction and electron microscopy studies. The tau phase start times were obtained through magnetic measurements. In order to tune the casting conditions for the formation of this phase, thermal modeling was carried out to predict the heat extraction rates for copper molds of different diameters (2 to 12 mm) containing hot solids during casting process. This enabled us to estimate the diameter of the mold to be used for obtaining tau phase directly during casting. It was concluded through experimental verification that 10-mm-diameter casting in copper mold is suitable to obtain complete tau phase. A saturation magnetization of 116 emu/g at 10 K was measured for such samples. The Curie point for the tau phase was found to be 668 K (395 A degrees C). Additionally, the cast rod exhibits a compressive strength of 1170 MPa which is higher than those of both ferrites and AlNiCo magnets.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. T. Klemmer, D. Hoydick, H. Okumura, B. Zhang, and W. A. Soffa: Scr. Metall. Mater., 1995, vol. 33, pp. 1793–805.10.1016/0956-716X(95)00413-P ↗
2. B. Zhang and W. A. Soffa: Scr. Metall. Mater., 1994, vol. 30, pp. 683–88.10.1016/0956-716X(94)90182-1 ↗
3. I. Zana and G. Zangari: J. Magn. Magn. Mater., 2004, vol. 272, pp. 1698–99.10.1016/j.jmmm.2003.12.262 ↗
4. W.F. Liu, S. Suzuki, D.S. Li, and K. Machida: J. Magn. Magn. Mater., 2006, vol. 302, pp. 201–05.10.1016/j.jmmm.2005.08.019 ↗
5. U. Allenstein, Y. Ma, A. Arabi-Hashemi, M. Zink, and S.G. Mayr: Acta Biomater., 2013, vol. 9, pp. 5845–53.10.1016/j.actbio.2012.10.040 ↗
6. A.G. Popov, O.A. Golovnia, and V.A. Bykov: J. Magn. Magn. Mater., 2015, vol. 383, pp. 226–31.10.1016/j.jmmm.2014.10.140 ↗
7. Y.K. Fang, H.W. Chang, Z.H. Guo, T. Liu, X.M. Li, W. Li, W.C. Chang, and B.S. Han: J. Alloys Compd., 2008, vol. 462, pp. 376–80.10.1016/j.jallcom.2007.08.069 ↗
8. J.M.D. Coey: J. Phys. Condens. Matter, 2014, vol. 26, p. 064211.10.1088/0953-8984/26/6/064211 ↗
9. Z.H. Hu, H.J. Qu, J.Q. Zhao, C.J. Yan, and X.M. Liu: J. Magn. Magn. Mater., 2014, vol. 368, pp. 54–58.10.1016/j.jmmm.2014.04.076 ↗
10. S. Liu, L. Don, M. Huang, A. Higgins, Y. Shen, H.E. Youngson, and C. Chen: J. Iron Steel Res. Int., 2006, vol. 13, pp. 123–35.10.1016/S1006-706X(08)60170-3 ↗
11. Y.L. Sun, J.T. Zhao, Z. Liu, W.X. Xia, S.M. Zhu, D. Lee, and A.R. Yan: J. Magn. Magn. Mater., 2015, vol. 379, pp. 58–62.10.1016/j.jmmm.2014.12.003 ↗
12. H. Kōno: J. Phys. Soc. Jpn., 1958, vol. 13, pp. 1444–51.10.1143/JPSJ.13.1444 ↗
13. A.J.J. Koch, P. Hokkeling, K.J. de Vos, et al.: J. Appl. Phys., 1960, vol. 31, p. 75.10.1063/1.1984610 ↗
14. R.Y. Umetsu, A. Sakuma, and K. Fukamichi: Appl. Phys. Lett., 2006, vol. 89, p. 2504.10.1063/1.2236103 ↗
15. J.H. Park, Y.K. Hong, S. Bae, J.J. Lee, J. Jalli, G.S. Abo, N. Neveu, S.G. Kim, C.J. Choi, and J.G. Lee: J. Appl. Phys., 2010, vol. 107, p. 09A731.10.1063/1.3337640 ↗
16. Q. Zeng, I. Baker, J.B. Cui, and Z.C. Yan: J. Magn. Magn. Mater., 2007, vol. 308, pp. 214–26.10.1016/j.jmmm.2006.05.032 ↗
17. J.-G. Lee, X.-L. Wang, Z.-D. Zhang, and C.-J. Choi: Thin Solid Films, 2011, vol. 519, pp. 8312–16.10.1016/j.tsf.2011.03.094 ↗
18. Hendricks G: Z. Anorg. Chem., 1908, Vol. 59, p. 444.
19. Ishiwara, T: Sci. Rep. Tohuku Imp. Univ., 1930, vol. 19, p. 500.
20. J. Konstantinović, D. Popov, N.B. Nešković, and M. Popovici: Solid State Commun., 1978, vol. 25, pp. 337–40.10.1016/0038-1098(78)90971-7 ↗
21. Y.-J. Kim and J.H. Perepezko: J. Appl. Phys., 1992, vol. 71, pp. 676–80.10.1063/1.351326 ↗
22. P.C. Kuo, Y.D. Yao, J.H. Huang, and C.H. Chen: J. Magn. Magn. Mater., 1992, vol. 115, pp. 183–86.10.1016/0304-8853(92)90053-Q ↗
23. D.C. Crew, P.G. McCormick, and R. Street: Scr. Metall. Mater., 1995, vol. 32, pp. 315–18.10.1016/S0956-716X(99)80057-0 ↗
24. H. Jian, K.P. Skokov, and O. Gutfleisch: J. Alloys Compd., 2015, vol. 622, pp. 524–28.10.1016/j.jallcom.2014.10.138 ↗
25. A. Morisako, M. Matsumoto, and M. Naoe: J. Appl. Phys., 1987, vol. 61, pp. 4281–83.10.1063/1.338445 ↗
26. Q. Zeng, I. Baker, and Z. Yan: J. Appl. Phys., 2006, vol. 99, p. 8E902.10.1063/1.2159187 ↗
27. J.M. Le Breton, J. Bran, E. Folcke, M. Lucis, R. Lardé, M. Jean, and J.E. Shield: J. Alloys Compd., 2013, vol. 581, pp. 86–90.10.1016/j.jallcom.2013.07.002 ↗
28. A. Pasko, F. Mazaleyrat, M. Lobue, E. Fazakas, and L.K. Varga: in EPJ Web Conference, EDP Sciences, 2013, p. 06008.10.1051/epjconf/20134006008 ↗
29. E.L. Houseman and J.P. Jakubovics: J. Magn. Magn. Mater., 1983, vol. 31, pp. 1007–08.10.1016/0304-8853(83)90771-0 ↗
30. Z.W. Liu, C. Chen, Z.G. Zheng, B.H. Tan, and R.V. Ramanujan: J. Mater. Sci., 2011, vol. 47, pp. 2333–38.10.1007/s10853-011-6049-8 ↗
31. J.J. Van Den Broek, H. Donkersloot, G. Van Tendeloo, and J. Van Landuyt: Acta Metall., 1979, vol. 27, pp. 1497–504.10.1016/0001-6160(79)90172-X ↗
32. C. Yanar, V. Radmilovic, W.A. Soffa, and J.M.K. Wiezorek: Intermetallics, 2001, vol. 9, pp. 949–54.10.1016/S0966-9795(01)00095-4 ↗
33. N.S. Satya Murthy, R.J. Begum, C.S. Somanathan, and M.R.L.N. Murthy: J. Appl. Phys., 1969, vol. 40, pp. 1870–71.10.1063/1.1657859 ↗
34. K. Matsushita, T. Okamoto, and T. Okamoto: J. Mater. Sci., 1985, vol. 20, pp. 689–99.10.1007/BF01026544 ↗
35. M. Asgar-Khan and M. Medraj: Mater. Trans., 2009, vol. 50, pp. 1113–22.10.2320/matertrans.MRA2008484 ↗
36. Kh.Y. Mulyukov and S.B. Khaphizov: J. Alloys Compd., 1992, vol. 182, pp. 69–76.10.1016/0925-8388(92)90575-T ↗
37. J.-G. Lee, P. Li, C.-J. Choi, and X.-L. Dong: Thin Solid Films, 2010, vol. 519, pp. 81–85.10.1016/j.tsf.2010.07.063 ↗
38. Y.J. Kim and J.H. Perepezko: Mater. Sci. Eng. A, 1993, vol. 163, pp. 127–34.10.1016/0921-5093(93)90586-4 ↗
39. W.H. Dreizler and A. Menth: IEEE Trans. Magn. 1979, vol. 15, p. 1775.10.1109/TMAG.1979.1060477 ↗
40. M. Hosoda, M. Oogane, M. Kubota, T. Kubota, H. Saruyama, S. Iihama, H. Naganuma, and Y. Ando: J. Appl. Phys., 2012, vol. 111, p. 07A324.10.1063/1.3676428 ↗
41. S. Kojima, T. Ohtani, N. Kato, K. Kojima, Y. Sakamoto, I. Konno, M. Tsukahara, and T. Kubo: in Magnetism and Magnetic Materials—1974 20th Annual Conference, San Francisco, AIP Publishing, 1975, pp. 768–69.10.1063/1.30281 ↗
42. C. Yanar, J.M.K. Wiezorek, W.A. Soffa, and V. Radmilovic: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2413–23.10.1007/s11661-002-0363-3 ↗
43. Ye.Z. Vintaykin, V.A. Udovenko, I.S. Belyatskaya, N.N. Luarsabishvili, and S.U. Makushew: Phys. Metall. Metalloved., 1974, vol. 38, p. 157.
44. A.V. Dobromyslov, L.I. Kaigorodova, and M.F. Komarova: Fiz. Met. Metalloved., 1977, vol. 43, pp. 1228–34.
45. A.S. Sologubenkoa, P. Mullnera, H. Heinricha’b, and G. Kostorza: Z. Met., 2004, vol. 95, p. 6.
46. S.D. Bhame: CSIR-National Chemical Laboratory, Pune, India, 2007.
47. J.A. Horton, J.L. Wright, and J.W. Herchenroeder: IEEE Trans. Magn., 1996, vol. 32, pp. 4374–76.10.1109/20.538873 ↗
48. Yu. M. Rabinovich, V. V. Sergeev, A. D. Maystrenko, V. Kulakovsky, S. Szymura, and H. Bala: Intermetallics, 1996, vol. 4, pp. 641–45.10.1016/0966-9795(96)00057-X ↗