journal article·2016-10

Low-Temperature Toughness of the Austempered Offshore Steel

C. Yu, T. C. Yang, C. Y. Huang, R. K. Shiue

Publisher page

Abstract

This study investigates low-temperature toughness of the offshore steel with two different austempering heat treatments. Toughness of upper bainite is significantly lower than that of lower bainite. Low impact toughness of the upper bainite is caused by the presence of martensite–austenite (MA) and increasing the amount of low-angle lath boundaries in upper bainite package. EBSD equipped in the SEM demonstrates an effective approach to analyze the misorientation angle of lath boundaries in upper bainite packet.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. S. K. Dhua, D. Mukerjee and D. S. Sarma: Metall. Mater. Trans., 2001, vol. 32A, pp. 2259-2270.10.1007/s11661-001-0201-z ↗
2. Norsok Standard, Material Data Sheets for Structural Steel, Rev. 3, 2000, Norway Technology Center, Oslo, Norway.
3. B. Hwang, C. G. Lee and S. J. Kim: Metall. Mater. Trans., 2011, vol. 42A, pp. 717-728.10.1007/s11661-010-0448-3 ↗
4. S. S. Kang, A. Bolouri and C. G. Kang: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 2012, vol. 226, pp. 242-251.
5. N. Isasti, D. Jorge-Badiola, M. Taheri and P. Uranga: Metall. Mater. Trans., 2014, vol. 45A, pp. 4972-4982.10.1007/s11661-014-2451-6 ↗
6. P. Mohseni, J. K. Solberg, M. Karlsen, O. M. Akselsen and E. Ostby: Metall. Mater. Trans., 2014, vol. 45A, pp. 384-94.10.1007/s11661-013-2110-3 ↗
7. N. Huda, A. R. H. Midawi, J. Gianetto, R. Lazor and A. P. Gerlich: Mater. Sci. Eng., 2016, vol. 662A, pp. 481-491.10.1016/j.msea.2016.03.095 ↗
8. S. Y. Han, S. Y. Shin, S. Lee, N. J. Kim, J. H. Bae and K. Kim: Metall. Mater. Trans., 2010, vol. 41A, pp. 329-340.10.1007/s11661-009-0135-4 ↗
9. H.K. Sung, S. Lee and S.Y. Shin: Metall. Mater. Trans., 2014, vol. 45A, pp. 2001-2013.
10. X. Li, Y. Fan, X. Ma, S. V. Subramanian and C. Shang: Mater Design, 2015, vol. 67, pp. 457-463.10.1016/j.matdes.2014.10.028 ↗
11. X. Li, X. Ma, S. V. Subramanian, C. Shang and R. D. K. Misra: Mater. Sci. Eng., 2014, vol. 616A, pp. 141-47.10.1016/j.msea.2014.07.100 ↗
12. Y. M. Kim, S. Y. Shin, H. Lee, B. Hwang, S. Lee and N. J. Kim: Metall. Mater. Trans., 2007, vol. 38A, pp. 1731-1742.10.1007/s11661-007-9197-3 ↗
13. T. Furuhara, H. Kawata, S. Morito and T. Maki: Mater. Sci. Eng., 2006, vol. 431A, pp. 228-236.10.1016/j.msea.2006.06.032 ↗
14. W. L. Costin, O. Lavigne and A. KotouSov: Mater. Sci. Eng., 2016, vol. 663A, pp. 193-203.10.1016/j.msea.2016.03.103 ↗
15. H. Kuhn, and D. Medlin, ASM Handbook, Volume 8 Mechanical Testing and Evaluation, 2000, ASM International, Materials Park, USA.10.31399/asm.hb.v08.9781627081764 ↗
16. J-M Haudin, A. Carin, M. Vincent, N. Amouroux, G. Bellet, F. Montezin, Int. J. Mater. Form., 2010, vol. 3, pp. 225-231.10.1007/s12289-009-0673-8 ↗
17. A. Lambert-Perlade, A.F. Gourgues and A. Pineau: Acta Mater., 2004, vol. 52, pp. 2337-2348.10.1016/j.actamat.2004.01.025 ↗
18. A. Lambert-Perlade, A.F. Gourgues, J. Besson, T. Sturel and A. Pineau: Metall. Mater. Trans., 2004, vol. 35A, pp. 1039-1053.10.1007/s11661-004-1007-6 ↗
19. C. Hofer, F. Winkelhofer, H. Clemens and S. Primig: Mater. Sci. Eng., 2016, vol. 664A, pp. 236-246.10.1016/j.msea.2016.04.005 ↗
20. X. L. Wang, X.M. Wang, C. J. Shang and R. D. K. Misra: Mater. Sci. Eng., 2016, vol. 649A, pp. 282-292.10.1016/j.msea.2015.09.030 ↗
21. L. Lan, X. Kong, C. Qiu and D. Zhao: Mater Design, 2016, vol. 90, pp. 488-498.10.1016/j.matdes.2015.10.158 ↗