journal article·2016-11

Fatigue Hardening Behavior of 1.5 GPa Grade Transformation-Induced Plasticity-Aided Martensitic Steel

Koh-Ichi Sugimoto, Tomohiko Hojo

Publisher page

Abstract

Low cycle fatigue hardening/softening behavior of a 0.2 pct C–1.5 pct Si–1.5 pct Mn–1.0 pct Cr–0.2 pct Mo–0.05 pct Nb transformation-induced plasticity (TRIP)-aided steel consisting of a wide lath martensite structure matrix and a narrow lath martensite–metastable retained austenite mixture was investigated. The steel exhibited notable fatigue hardening in the same way as TRIP-aided bainitic ferrite steel, although conventional martensitic steel such as SCM420 steel with the same tensile strength exhibited fatigue softening. The considerable fatigue hardening of this steel is believed to be associated mainly with the compressive internal stress that results from a difference in flow stress between the matrix and the martensite–austenite-like phase, with a small contribution from the strain-induced transformation and dislocation hardenings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. [1] J. Kobayashi, S. Song, and K. Sugimoto: ISIJ Int., 2012, vol. 52, pp. 1124–9.10.2355/isijinternational.52.1124 ↗
2. J. Kobayashi, D.V. Pham and K. Sugimoto: Steel Res. Int. (Special Edn: ICTP 2011), 2011, pp. 598–603.
3. D.V. Pham, J. Kobayashi and K. Sugimoto: ISIJ Int., 2014, vol. 54, pp. 1943–51.10.2355/isijinternational.54.1943 ↗
4. [4] J. Kobayashi, N. Yoshikawa, and K. Sugimoto: ISIJ Int., 2013, vol. 53, pp. 1479–86.10.2355/isijinternational.53.1479 ↗
5. [5] J. Kobayashi, D. Ina, and K. Sugimoto: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5006–17.10.1007/s11661-013-1882-9 ↗
6. T. Hojo, J. Kobayashi, and K. Sugimoto: Proc. of Materials Science and Technology 2014, TMS, Warrendal, PA, 2012, pp. 1186–92.
7. K. Sugimoto, J. Kobayashi, and D.V. Pham: Proc. Int. Symp. on New Developments in Advanced High Strength Sheet Steels. AIST, Warrendale, PA, 2013, pp. 175–184.
8. [8] J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 219–37.10.1016/j.cossms.2004.09.003 ↗
9. C. Wang, J. Shi, W. Cao, M. Wang, W. Hui, and H. Dong: Proc. ICAS 2010; Metallurgical Industry Press: Beijing, China, 2010; CD-ROM.
10. [10] J. G. Speer, E. De Moor, K.O. Findley, D.K. Matlock, B.C. De Cooman, and D.V. Edmonds: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3591–601.10.1007/s11661-011-0869-7 ↗
11. [11] H. Huang, O. Matsumura and T. Furukawa: Mater. Sci. Technol., 1994, vol. 10, pp. 621–6.10.1179/mst.1994.10.7.621 ↗
12. [12] H. F. Xu, J. Zhao, W. Q. Cao, J. Shi, C. Y. Wang, C. Wang, J. Li, and H. Dong: Mater. Sci. Eng. A, 2012, vol. 532, pp. 435–42.10.1016/j.msea.2011.11.009 ↗
13. K. Sugimoto, H. Tanino, and J. Kobayashi: Proc. of Materials Science and Technology 2014, TMS, Warrendal, PA, pp. 281–90.
14. C. Wang, W. Cao, J. Shi, and C. Huang (2013) Mater. Sci. Eng A, 562: 89–9510.1016/j.msea.2012.11.044 ↗
15. [15] O. Grassel, L. Kruger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
16. [16] S.Vercammen, B. Blanpain, B.C. De Cooman, and P. Wollants: Acta Mater., 2004, vol. 52, pp. 2005–12.10.1016/j.actamat.2003.12.040 ↗
17. A.S. Hamada, L.P. Karjalainen, and J. Puustinen: Mater. Sci. Eng. A, 2009, vol. 517, pp. 68–77.10.1016/j.msea.2009.03.039 ↗
18. [18] C.J. Rusing, T. Niendorf, A. Frehn, and H.J. Maier: Adv. Mater. Res., 2014, vols. 891–2, pp. 1603–8.10.4028/www.scientific.net/AMR.891-892.1603 ↗
19. [19] K. Sugimoto, T. Iida, J. Sakaguchi, and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 902–8.10.2355/isijinternational.40.902 ↗
20. [20] K. Sugimoto, M. Kobayashi, K. Inoue, and S. Masuda: Tetsu-to-Hagane, 1999, vol. 85, pp. 856–62. (in Japanese)10.2355/tetsutohagane1955.85.11_856 ↗
21. [21] N. Yoshikawa, J. Kobayashi, and K. Sugimoto: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4129–36.10.1007/s11661-012-1246-x ↗
22. [22] I. de Diego-Calderon, P. Rodriguez-Calvillo, A. Lara, J.M. Molina-Aldareguia, R.H. Petroc, D. De Knijf, and I. Sabirov: Mater. Sci. Eng. A, 2015, vol. 641, pp. 215–24.10.1016/j.msea.2015.06.034 ↗
23. [23] Q. Zhou, L. Qian, J. Meng, L. Zhao, and F. Zhang: Mater. Design, 2015, vol. 85, pp. 487–496.10.1016/j.matdes.2015.06.172 ↗
24. [24] S. Song, K. Sugimoto, S. Kandaka, A. Futamura, M. Kobayashi, and S. Masuda: Mater. Sci. Res. Int., 2003, vol. 9, pp. 223–9.
25. [25] H. Maruyama: J. Jap. Soc. Heat Treat., 1977, vol. 17, pp. 198–204.
26. [26] D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469–74.
27. [27] Y. Maruyama, T. Miyazaki, and T. Sasaki: J. Soc. Mater. Sci. Jap., 2015, vol. 64, pp. 198–204. (in Japanese)10.2472/jsms.64.560 ↗
28. S. Yasuki, K. Sugimoto, and M. Kobayashi: J. Japan Inst. Met., 1990, vol. 54, pp. 1350–7. (in Japanese)10.2320/jinstmet1952.54.12_1350 ↗
29. [29] K. Sugimoto, M. Kobayashi, and S. Yasuki: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2637–44.10.1007/s11661-997-0020-y ↗
30. [30] Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, N. Minakawa, A. Moriai, and Y. Morii: Acta Mater., 2004, vol. 52, pp. 5737–45.10.1016/j.actamat.2004.08.016 ↗
31. [31] T. Mura and T. Mori: Micromechanics, Baifu-kan, Tokyo, 1976. (in Japanese)
32. [32] M.F. Ashby: Phil. Mag., 1966, vol. 14, pp. 1157–78.10.1080/14786436608224282 ↗