A High-Strength High-Ductility Ti- and Mo-Bearing Ferritic Steel
Source abstract
Abstract
This study reports the development of a Ti- and Mo-bearing ferritic steel precipitation-strengthened by nanometer-sized carbides. The steel showed an ultimate tensile strength of 995 MPa, a tensile elongation of 20 pct, and a hole-expanding ratio of 44 pct. The precipitation of nanometer-sized carbides in this steel during isothermal transformation at 873 K, 898 K, and 973 K (600 °C, 625 °C, and 700 °C) for 60 minutes was investigated in detail. The contributions of various strengthening mechanisms were analyzed, and the maximum contribution from the nanometer-sized carbide precipitates was estimated to be about 430 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Y. Huang, A. Zhao, J. He, X. Wang, Z. Wang, and L. Q: Int. J. Min. Met. Mater., 2013, vol. 20, pp. 1155–63.10.1007/s12613-013-0849-6 ↗
2. Y. Huang, A. Zhao, Z. Mi, H. Jing, W. Li, Y. Hui: J. Iron Steel Res. Int., 2013, vol. 11, pp. 111–17.10.1016/S1006-706X(13)60205-8 ↗
3. Y. Funakawa, T. Shiozaki, K. Tomita, T. Yamamoto, E. Maeda: Isij Int, 2004, vol. 11, pp. 1945–51.10.2355/isijinternational.44.1945 ↗
4. C.I. Garcia, K. Cho, K. Redkin, A.J. Deardo, S. Tan, M. Somani, L.P. Karjalainen: Isij Int, 2011, vol. 6, pp. 969–74.10.2355/isijinternational.51.969 ↗
5. J.A. Ronevich, J.G. Speer, D.K. Matlock: SAE Int. J. Mater. Manuf., 2010, vol. 1, pp. 255–67.10.4271/2010-01-0447 ↗
6. F.Y.K.S. Seto Kazuhiro: JFE Technical Report, 2007, pp. 19–25.10.1300/J124v25n02_02 ↗
7. K. Kimijima and T. Soshiroda: Google Patents, 2010.
8. K. Mori, Y. Abe, Y. Suzui: J. Mater. Process. Technol., 2010, vol. 4, pp. 653–59.10.1016/j.jmatprotec.2009.11.014 ↗
9. R. Bengochea, B. Lopez, and I. Gutierrez: ISIJ Int., 1999, pp. 583–91.10.2355/isijinternational.39.583 ↗
10. H. Beladi, G.L. Kelly, P.D. Hodgson: Metall. Mater. Trans. A, 2007, vol. 3, pp. 450–63.10.1007/s11661-006-9080-7 ↗
11. S. Mukherjee, I.B. Timokhina, C. Zhu, S.P. Ringer, P.D. Hodgson: Acta Mater, 2013, vol. 7, pp. 2521–30.10.1016/j.actamat.2013.01.028 ↗
12. V. Schwinn, J. Bauer, P. Flüss, H.J. Kirsch, E. Amoris: Revue de Metallurgie, 2011, vol.5, pp.283.10.1051/metal/2011054 ↗
13. H. Yao, Z. Zhengzhi, Z. Aimin, S. Wei: J Univ Sci Technol B, 2013, vol. 07, pp. 882–89.
14. H. Yen, P. Chen, C. Huang, J. Yang: Acta Mater, 2011, vol. 16, pp. 6264–74.10.1016/j.actamat.2011.06.037 ↗
15. R. Okamoto, A. Borgenstam, J. AA Gren: Acta Mater., 2010, vol. 14, pp. 4783–90.10.1016/j.actamat.2010.05.014 ↗
16. N. Balliger, R. Honeycombe: Metall. Mater. Trans. A, 1980, vol. 3, pp. 421.10.1007/BF02654566 ↗
17. A.D. Batte, R. Honeycombe: Metal Science, 1973, vol. 1, pp. 160–68.10.1179/030634573790445370 ↗
18. Z. Wang, X. Mao, Z. Yang, X. Sun, Q. Yong, Z. Li, and Y. Weng: Mater. Sci. Eng. A, 2011, pp. 459–67.10.1016/j.msea.2011.09.062 ↗
19. H. Bhadeshia: Phys. Status Solidi (A), 1982, vol. 2, pp. 745–50.10.1002/pssa.2210690238 ↗
20. A. Nartowski, I. Parkin, A. Craven: J. Mater. Chem., 1999, vol. 6, pp. 1275–81.10.1039/a808642g ↗
21. S. Lee, Y. Lee, W. Jung, J. Choi: Metals and Materials International, 2009, vol.5, pp.797-801.10.1007/s12540-009-0797-2 ↗
22. S. Chatterjee, H. Bhadeshia: Mater Sci Technol. Lond., 2007, vol. 5, pp. 606–09.10.1179/174328407X179511 ↗
23. F.B. Pickering: Physical Metallurgy and the Design of Steels, Applied Science Publishers London, 1978.
24. R. Wang, C.I. Garcia, M. Hua, K. Cho, H. Zhang, A.J. Deardo: ISIJ Int., 2006, vol. 9, pp. 1345–53.10.2355/isijinternational.46.1345 ↗
25. Q.L. Yong. Secondary Phases in Steels. Metall. Industry Press, Beijing, 2006.(in chinese)
26. G. Jha, S. Das, A. Lodh, and A. Haldar: Mater. Sci. Eng. A., 2012, vol. 0, pp. 457–63.10.1016/j.msea.2012.05.070 ↗
27. K. Takeda, N. Nakada, T. Tsuchiyama, S. Takaki: ISIJ Int., 2008, vol. 8, pp. 1122–25.10.2355/isijinternational.48.1122 ↗
28. H. Yao, Z. Zhengzhi, Z. Aimin: J Univ Sci Technol B, 2015, vol. 37, pp. 896–904.
29. T. Gladman, D. Dulieu, and I.D. McIvor: Proc. Conf. Microalloying, vol. 75, 1977.
30. R. Soto, W. Saikaly, X. Bano, C. Issartel, G. Rigaut, A. Charai: Acta Mater, 1999, vol. 12, pp. 3475–81.10.1016/S1359-6454(99)00190-1 ↗
31. Y.F. Shen, C.M. Wang, X. Sun: Mater. Sci. Eng., A, 2011, vol. 28, pp. 8150–56.10.1016/j.msea.2011.07.065 ↗