The Effect of Hydrogen on Plasma Nitriding of Austenitic Stainless Steel: Kinetic Modeling
Source abstract
Abstract
The kinetic model of adsorption and stress-induced diffusion of nitrogen in austenitic stainless steels taking place during plasma nitriding using various mixtures of nitrogen and hydrogen is proposed. On the basis of proposed model, a numerical study has been undertaken to analyze and describe the effect of hydrogen on plasma nitriding of austenitic stainless steel. It was shown that the addition of hydrogen with concentrations in the range ~(30 to 40) pct enhances nitrogen penetration into steel. This is due to two factors: (1) reduction of the surface oxide due to chemical etching of the oxygen by hydrogen and (2) increase of NH radicals which are converted to active nitrogen atoms on the steel surface, i.e., the amount of adsorbed and diffused nitrogen increases. As a result, the thicker nitrogen-containing layer is observed. Moreover, results of numerical prediction show that an excessive amount of hydrogen (more than ~70 pct) in the gas mixture retards the nitriding process in comparison with nitriding in pure nitrogen plasma.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. V. Singh, K. Marchev, C.V. Cooper, E.I. Meletis: Surf. Coat. Technol., 2002, vol.160 p. 249.10.1016/S0257-8972(02)00403-6 ↗
2. S. Picard, J.B. Memet, R. Sabot, J.L. Grosseau-Poussard, J.P. Rivière, R. Meilland: Mater. Sci. Eng. A, 2001, vol. 303, pp. 163–172.10.1016/S0921-5093(00)01841-4 ↗
3. E. Menthe and K.-T. Rie: Surf. Coat. Technol., 1999, vol. 116–119, pp. 199–204.10.1016/S0257-8972(99)00085-7 ↗
4. Y. Zhao, B. Yu, L. Dong, H. Du, J. Xiao: Surf. Coat. Technol., 2012, vol. 210, pp. 90 – 96.10.1016/j.surfcoat.2012.08.070 ↗
5. J.M. Priest, M.J. Baldwin, M.P. Fewell, S.C. Haydon, G.A. Collins, K.T. Short, J. Tendys: Thin Solid Films, 1999, vol. 345, pp.113–118.10.1016/S0040-6090(99)00063-2 ↗
6. S. Mändl, B. Fritzsche, D. Manova, D. Hirsch, H. Neumann, E. Richter, B. Rauschenbach: Surf. Coat. Technol., 2005, vol. 195, pp. 258–263.10.1016/j.surfcoat.2004.05.031 ↗
7. T. Czerwiec, H. Michel, E. Bergmann: Surf. Coat. Technol., 1998, vol. 108–109, pp. 182–190.10.1016/S0257-8972(98)00555-6 ↗
8. T. Czerwiec, N. Renevier, H. Michel: Surf. Coat. Technol., 2000, vol. 131, pp. 267–277.10.1016/S0257-8972(00)00792-1 ↗
9. G.G. Tibbets: J. Appl. Phys., 1974, vol. 45, pp. 5072–5073.10.1063/1.1663186 ↗
10. A. Szasz, D.J. Fabian, A. Henry, Z. Szaszne-Csih: J. Appl. Phys., 1989, vol. 66, pp. 5598–5601.10.1063/1.343664 ↗
11. J. Bougdira, G. Henrion, M. Fabry: J. Phys. D: Appl. Phys., 1991, vol. 24, pp. 1076–1080.10.1088/0022-3727/24/7/007 ↗
12. M. Hudis: J. Appl. Phys., 1972, vol. 44, pp. 1489–1496.10.1063/1.1662398 ↗
13. D. Hovorka, J. Vlček, R. Čerstvý, J. Musil, P. Bělský, M. Ružička, J.G. Han: J. Vac. Sci. Technol. A, 2000, vol. 18, p. 2715.10.1116/1.1308587 ↗
14. A. Garamoon, U.M. Rashed, A. Abouelela, M.A. Eissa, A.H. Saudi, D.M. El-zeer, F. El-Hossary: IEEE Transactions on Plasma Science, 2006, vol. 34, pp. 1066–1073.10.1109/TPS.2006.878388 ↗
15. L. Wang, X. Xu, Z. Yu, Z. Hei: Surf. Coat. Technol., 2000, vol. 124, pp. 93–96.10.1016/S0257-8972(99)00637-4 ↗
16. S. Kumar, M.J. Baldwin M.P. Fewell, S.C. Haydon, K.T. Short, G.A. Collins, J. Tendys: Surf. Coat. Technol., 2000, vol. 123, pp. 29–35.10.1016/S0257-8972(99)00393-X ↗
17. J.M. Priest, M.J. Baldwin, M.P. Fewell: Surf. Coat. Technol., 2001, vol. 145, pp. 152–163.10.1016/S0257-8972(01)01311-1 ↗
18. C. A. Figueroa, D. Wisnivesky, F. Alvarez: J. Appl. Phys., 2002, vol. 92, p. 764.10.1063/1.1483893 ↗
19. C. A. Figueroa and F. Alvarez: J. Vac. Sci. Technol. A, 2005, vol. 23, p. L9.10.1116/1.2013322 ↗
20. C.A. Figueroa, S. Weber, T. Czerwiec, F. Alvarez: Scripta Materialia, 2006, vol. 54, pp. 1335–1338.10.1016/j.scriptamat.2005.12.013 ↗
21. M. Tamaki, Y. Tomii, N. Yamamoto: Plasmas and Ions, 2000, vol. 3, pp. 33–39.10.1016/S1288-3255(00)00108-8 ↗
22. L. Petitjean and A. Ricard: J. Phys. D: Appl. Phys., 1984, vol. 17, pp. 919–929.10.1088/0022-3727/17/5/008 ↗
23. H. Martınez and F.B. Yousif: Eur. Phys. J. D, 2008, vol. 46, pp. 493–498.10.1140/epjd/e2008-00006-6 ↗
24. S. Parascandola, W. Moller, D.L. Williamson: Appl. Phys. Lett., 2000, vol. 76, pp. 2194–2196.10.1063/1.126294 ↗
25. T. Moskalioviene and A. Galdikas: Vacuum, 2012, vol. 86, pp. 1552–1557.10.1016/j.vacuum.2012.03.026 ↗
26. A. Galdikas and T. Moskalioviene: Surf. Coat. Technol., 2011, vol. 205, pp. 3742–3746.10.1016/j.surfcoat.2011.01.040 ↗
27. A. Galdikas and T. Moskalioviene: Comput. Mater. Sci., 2013, vol. 72, pp. 140–145.10.1016/j.commatsci.2013.02.007 ↗
28. A. Einstein: Annalen der Physik, 1905, vol. 17, pp. 549–560.10.1002/andp.19053220806 ↗
29. S. Jegou, L. Barrallier, R. Kubler: Acta Mater., 2010, vol. 58, pp. 2666–2676.10.1016/j.actamat.2009.12.053 ↗
30. T. Christiansen and M. Somers: Mater. Sci. Eng. A, 2006, vol. 424, pp. 181–189.10.1016/j.msea.2006.03.007 ↗
31. G. Ertl and M. Huber: Z. Phys. Chem. N. F. Bd., 1980, vol. 119, pp. 97–102.10.1524/zpch.1980.119.1.097 ↗
32. M. Weiss, G. Ertl, F. Nitschké: Appl. Surf. Sci., 1979, vol. 2, pp. 614–35.10.1016/0378-5963(79)90049-7 ↗
33. Ch.H. Shon and T. Makabe: IEEE Transactions on Plasma Science, 2004, vol. 32, pp. 390–397.10.1109/TPS.2004.828121 ↗
34. E.A. Kurz and J.B. Hudson: Technical Report No. 4 Contract N00014-86-K-0259, 1988.
35. I. Goikoetxea, M. Alducin, R. Dıez Muino, J. I. Juaristi: Phys. Chem. Chem. Phys., 2012, vol. 14, pp. 7471–7480.10.1039/c2cp40229g ↗
36. B. Darwen: U.S. National Bureau of Standards, 1970.
37. Sh. Zhang and T.N. Truong: J. Chem. Phys., 2000, vol. 113, p. 6149.10.1063/1.1308544 ↗
38. I. John Prigogine: Advances in Chemical Physics, Wiley, New York, 2009, pp. 8–539.
39. J. Takada, S. Yamamoto, Sh. Kikuchi, M. Adachi: Metallurgical Transactions A, 1986, vol. 17, pp. 221–229.10.1007/BF02643898 ↗
40. K. Takeda, K. Yamashita, Y. Murata, T. Koyama, M. Morinaga: Materials Transactions, 2008, vol. 49, pp. 479–483.10.2320/matertrans.MBW200706 ↗
41. W. Möller, S. Parascandola, T. Telbizova, R. Günzel, E. Richter: Surf. Coat. Technol., 2001, vol. 136, pp.73–79.10.1016/S0257-8972(00)01015-X ↗