journal article·2008-12

Failure Mechanisms during Periodic Cellular Metal Fabrication by Perforation Stretching

B.A. Bouwhuis, G.D. Hibbard

Publisher page

Abstract

Periodic cellular metals (PCMs) are structurally efficient lightweight materials. Perforation stretching is a recently developed PCM fabrication method that plastically deforms perforated sheet precursors into a three-dimensional (3-D) array of load-supporting struts. The present study examines the onset and limit of useful plastic deformation during perforation stretching of a wrought 3003 aluminum alloy over a range of precursor microstructures and geometries. A compression platform was used to apply the forming forces such that force-displacement profiles could be obtained for each condition. The initial stage of plastic deformation was bending dominated, and it was found that a simple plastic bending cantilever model was able to account for the nearly order of magnitude range in plasticity onset force. On the other hand, unlike a previously reported pin punch through mechanism, it was found that for the present forming conditions, perforation-stretching failure could be attributed largely to tensile instability, suggesting that the tensile failure strain is a key parameter in determining the range of accessible perforation-stretching formed architectures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Automotive and Human Injury Biomechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. M.F. Ashby, A. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, H.N.G. Wadley: Metal Foams—A Design Guide, Butterworth-Heinemann, Boston, MA, 2000, pp. 62–72
2. H.N.G. Wadley: Adv. Eng. Mater., 2002, vol. 4, pp. 726–3310.1002/1527-2648(20021014)4:10<726::AID-ADEM726>3.0.CO;2-Y ↗
3. M.F. Ashby: Philos. Mag., 2005, vol. 85, pp. 3235–5710.1080/14786430500079892 ↗
4. H.N.G. Wadley: Philos. Trans. R. Soc. A, 2006, vol. 364, pp. 31–6810.1098/rsta.2005.1697 ↗
5. D.J. Sypeck, H.N.G. Wadley: J. Mater. Res., 2001, vol. 16, pp. 890–9710.1557/JMR.2001.0117 ↗
6. D.T. Queheillalt, H.N.G. Wadley: Acta Mater., 2005, vol. 53, pp. 303–1310.1016/j.actamat.2004.09.024 ↗
7. P. Moongkhamklang, D.M. Elzey, H.N.G. Wadley: Compos. Part A–Appl. S., 2008, vol. 39, pp. 176–8710.1016/j.compositesa.2007.11.007 ↗
8. J.C. Wallach, L.J. Gibson: Int. J. Sol. Struct., 2001, vol. 38, pp. 7181–9610.1016/S0020-7683(00)00400-5 ↗
9. S. Chiras, D.R. Mumm, A.G. Evans, N. Wicks, J.W. Hutchinson, K. Dharmasena, H.N.G. Wadley, S. Fichter: Int. J. Sol. Struct., 2002, vol. 39, pp. 4093–411510.1016/S0020-7683(02)00241-X ↗
10. G.W. Kooistra, V.S. Deshpande, H.N.G. Wadley: Acta Mater., 2004, vol. 52, pp. 4229–3710.1016/j.actamat.2004.05.039 ↗
11. G.W. Kooistra, H.N.G. Wadley: Mater. Des., 2007, vol. 28, pp. 507–1410.1016/j.matdes.2005.08.013 ↗
12. B.A. Bouwhuis, S.K. Tang, and G.D. Hibbard: Compos. Part A, 2008, vol. 39, pp. 1556–64.10.1016/j.compositesa.2008.06.001 ↗
13. D.J. Sypeck, H.N.G. Wadley: Adv. Eng. Mater., 2002, vol. 4, pp. 759–6410.1002/1527-2648(20021014)4:10<759::AID-ADEM759>3.0.CO;2-A ↗
14. B.A. Bouwhuis, G.D. Hibbard: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 919–2710.1007/BF02735014 ↗
15. B.A. Bouwhuis, G.D. Hibbard: in Processing and Fabrication of Advanced Materials XV, T.S. Srivatsan, R.A. Varin, eds., ASM INTERNATIONAL, Materials Park, OH, 2006, pp. 87–101
16. E. Bele, B.A. Bouwhuis, G.D. Hibbard: Mater. Sci. Eng. A, 2008, vol. 489, pp. 29–3710.1016/j.msea.2008.01.081 ↗
17. D.J. Sypeck: App. Compos. Mater., 2005, vol. 12, pp. 229–4610.1007/s10443-005-1129-z ↗
18. B.A. Bouwhuis and G.D. Hibbard: in Porous Metals and Metallic Foams, L.P. Lefebvre, J. Banhart, and D. Dunand, eds., DEStech Publications, Lancaster, PA, 2008, pp. 91–94.
19. Aluminum and Aluminum Alloys, J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, 1993, pp. 8, 319–20, and 665–69
20. Y. Kwag, J.G. Morris: Mater. Sci. Eng., 1986, vol. 77, pp. 59–7410.1016/0025-5416(86)90354-X ↗
21. J. Zhou, S. Allameh, W.O. Soboyejo: J. Mater. Sci., 2005, vol. 40, pp. 429–3910.1007/s10853-005-6100-8 ↗
22. M.A. Meyers, K.K. Chawla: Mechanical Metallurgy—Principles and Applications, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1984, pp. 561–63
23. Standard Test Method for Determining Bending Yield Moment of Nails, ASTM Standard F 1575-03, ASTM, Philadelphia, PA, 2003
24. W.C. Setzer, J.G. Morris: Trans. ASM, 1964, vol. 57, pp. 589–602
25. J.G. Morris: Trans. ASM, 1966, vol. 59, pp. 1006–09
26. S.P. Chen, N.C.W. Kuijpers, S. Van Der Zwaag: Mater. Sci. Eng. A, 2003, vol. 341, pp. 296–30610.1016/S0921-5093(02)00245-9 ↗
27. E.V. Crane: Plastic Working of Metals and Non-Metallic Materials in Presses, 3rd ed., John Wiley & Sons, New York, NY, 1944, pp. 25–50
28. A.W. Spaink: Report No. SM-63, Royal Netherlands Aircraft Factories Fokker, The Netherlands, 1971
29. Q. Zhou, T. Wierzbicki: Int. J. Mech. Sci., 1996, vol. 38, pp. 303–2410.1016/0020-7403(95)00054-2 ↗
30. M. Li: Int. J. Mech. Sci., 2000, vol. 42, pp. 907–2310.1016/S0020-7403(99)00034-X ↗
31. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., John Wiley & Sons, New York, NY, 1996, pp. 292–97
32. J.L. Duncan, J.E. Bird: Sheet Met. Ind., 1978, vol. 55, pp. 1015–25
33. J.D. Embury, J.L. Duncan: Ann. Rev. Mater. Sci., 1981, vol. 11, pp. 505–2110.1146/annurev.ms.11.080181.002445 ↗
34. R. Stevenson: J. Appl. Metalworking, 1984, vol. 3, pp. 272–8010.1007/BF02833655 ↗
35. J. Kaneko, M. Sugamata, M. Takeshima: J. Jpn. Inst. Light Met., 1985, vol. 35, pp. 12–1910.2464/jilm.35.12 ↗
36. W.A. Backofen: Deformation Processing, Addison-Wesley Publishing Co., Reading, MA, 1972, pp. 201–15
37. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, Inc., Toronto, ON, 1986, pp. 293–95
38. A.K. Ghosh: Metall. Trans. A, 1977, vol. 8A, pp. 1221–3210.1007/BF02643836 ↗
39. M.Y. Demeri: J. Appl. Metalworking, 1981, vol. 2, pp. 3–1010.1007/BF02833993 ↗
40. M.Y. Demeri: J. Appl. Metalworking, 1983, vol. 2, pp. 288–9210.1007/BF02833913 ↗
41. S. Sriram, C. Wong, M. Huang, B. Yan: J. Mater. Manufacturing, 2003, vol. 112, pp. 641–49