journal article·2013-06

Characterization of Joints Between Aluminum and Galvanized Steel Sheets

Rajashekhara Shabadi, Michel Suery, Alexis Deschamps

Publisher page

Abstract

Sound joints between an AA6016 aluminum sheet of 1.2-mm thickness and a low-carbon galvanized steel sheet of 0.77-mm thickness are obtained using the laser pseudo-brazing method. A zinc-based aluminum alloy is used as a filler wire with optimized process parameters for laser pseudo-brazing. Metallurgical investigation of the joint is carried out using a scanning electron microscope and energy-dispersive X-ray analysis. Joints produced using Al-Zn filler wire showed a moderate strength and quality with a layer containing principally Fe2Al5Znx type intermetallics of ~10-μm thickness. Failure in the heat-affected zone of aluminum is found to be dominative, while in some cases, fracture along the interface between the intermetallic layer and the steel sheet is observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. “Reducing Co2 Emissions: Progress and Constraints—The Industry’s Commitment to This Global Challenge”, http://www.acea.be/news/news_detail/reducing_co2_emissions/.
2. Aluminium Materials Technology for Automobile Construction, W.J. Bartz, ed., Mechanical Engineering Publications, London, 1993.
3. J. Hirsch: Automotive Trends in Aluminium—The European Perspective, ICAA9, J.F. Nie, A.J. Morton, and B.C. Muddle, eds., Mater. Forum., 28, Institute of Materials Engineering Australasia Ltd., 2004, vol. 1, pp. 15–23.
4. A.B.M. Mujibur Rahman, S. Kumar, and A.R. Gerson: Corr. Sci., 2007, vol. 49, pp. 4339–51.10.1016/j.corsci.2007.04.010 ↗
5. ASM Handbook, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1992, vol. 63.
6. K. Bouche, F. Barbier, and A. Coulet: Mater. Sci. Eng. A, 1998, vol. 249, pp. 167–75.10.1016/S0921-5093(98)00573-5 ↗
7. R. Spina and L. Tricarico: Laser Welding of Aluminium-Steel Clad Materials for Naval Applications, Laser Welding, X. Na, Stone, ed., Intech, 2010.10.5772/9858 ↗
8. T. Murakami, K. Nakata, H. Tong, and M. Ushio: ISIJ Int., 2003, vol. 43 (10), pp. 1596–1602.10.2355/isijinternational.43.1596 ↗
9. H. Dong, W. Hu, Y. Duan, X. Wang, and C. Dong: J. Mater. Proced. Technol., 2012, vol. 212 (2), pp. 458–64,10.1016/j.jmatprotec.2011.10.009 ↗
10. S. Fukumoto, H. Tsubakino, K. Okita, M. Aritoshi, and T. Tomita: Mater. Sci. Technol., 1999, vol. 15, pp. 1080–86.10.1179/026708399101506805 ↗
11. T. Tanaka, T. Morishige, and T. Hirata: Scripta Mater., 2009, vol. 61, pp. 756–59.10.1016/j.scriptamat.2009.06.022 ↗
12. T. Watanabe, H. Takayama, and A. Yanagisawa: J. Mater. Proced. Technol., 2006, vol. 178, pp. 342–49.10.1016/j.jmatprotec.2006.04.117 ↗
13. E. Taban, J.E. Gould, and J.C. Lippold: Mater. Sci. Eng. A., 2010, vol. 31, pp. 2305–11.
14. J. Tsujino, K. Hidai, A. Hasegawa, R. Kanai, H. Matsuura, and K. Matsushima: Ultrasonics, 2002, vol. 40, pp. 371–74.10.1016/S0041-624X(02)00124-5 ↗
15. M. Alexandre, R. Shabadi, D. Alexis, M. Suery, S. Matteï, D. Grevey, and E. Cicala: Opt. Laser Technol., 2007, vol. 39 (3), pp. 652–61.10.1016/j.optlastec.2005.08.014 ↗
16. G. Sierra, P. Peyre, F. Deschaux-Beaume, D. Stuart, and G. Fras: Mater. Sci. Eng. A, 2007, vol. 447, nos. 1–2, pp. 197–208.10.1016/j.msea.2006.10.106 ↗
17. M. Potesser, T. Schoeberl, H. Antrekowitsch, and J. Bruckner: EPD Congr. 2006, TMS, Warrendale, PA, 2006.
18. W.H. Zhang, X.M. Qiu, D.Q. Sun, and L.J. Han: Sci. Technol. Weld. Join., 2011, vol. 16 (2), pp. 153–61.10.1179/1362171810Y.0000000009 ↗
19. G. Sierra, P. Peyre, F. Deschaux Beaume, D. Stuart, and G. Fras: Mater. Char., 2008, vol. 59 (12), pp. 1705–15.10.1016/j.matchar.2008.03.016 ↗
20. J. Ding, F. Li, F. Qu, P. Peyre, and R. Fabbro: Chin. Opt. Lett., 2005, vol. 3, pp. 1–4.
21. M.J. Rathod and M. Kutsuna: Weld. J., 2004, vol. 80, pp. 16–26.
22. A. Mathieu, S. Pontevicci, J.-C. Viala, E. Cicala, S. Mattei, and D. Grevey: Mater. Sci. Eng. A, 2006, vols. 435–436, pp. 19–28.10.1016/j.msea.2006.07.099 ↗
23. G. Sierra, P. Peyre, F. Deschaux-Beaume, D. Stuart, and G. Fras: Mater. Sci. Eng. A, 2007, vol. 447, pp. 197–208.10.1016/j.msea.2006.10.106 ↗
24. M. Kreimeyer and G. Sepold: Proc. ICALEO Jacksonville, 2002.
25. J. Xie: Welding Research, 224-S October 2002, http://aws.perusion.com/wj/supplement/10-2002-XIE-s.pdf.
26. K. Mizuno, A. Nylund, and I. Olefjord: Mater. Sci. Technol., 1996, vol. 12. p. 306.10.1179/mst.1996.12.4.306 ↗
27. K. Mizuno, A. Nylund, and I. Olefjord: Corr. Sci., 2001, vol. 43 (2), pp. 381–96.10.1016/S0010-938X(00)00069-X ↗
28. Imagej image analysis software, http://rsbweb.nih.gov/ij/.
29. Z.W. Chen, J.T. Gregory, and R.M. Sharp: Metall. Trans. A, 1992, vol. 23A, pp. 2393–2400.10.1007/BF02658042 ↗
30. M. Urednicek and S. Kirkaldy JS.: Z. Metallkd., 1987, vol. 64, pp. 649.
31. N.-Y. Tang, G.R. Adams, and P.S. Kolisnyk: GALVATECH’95, Iron and Steel Society, Chicago, 1995, p. 777.
32. C. Huang and S. Kou: Weld. Res. Suppl., 2001, pp. 9s–17s.
33. R. Hermann, S.S. Birley, and P. Holdway: Mater. Sci. Eng. A, 1996, vol. 212, pp. 247–55.10.1016/0921-5093(96)10198-2 ↗
34. F. Malek Ghaini, M. Sheikhi, M.J. Torkamany, and J. Sabbaghzadeh: Mater. Sci. Eng. A, 2009, vol. 519, (1–2), pp. 167–71.10.1016/j.msea.2009.04.056 ↗
35. B. Weiss: Weld. J., 1970, vol. 49, pp. 471s–87s.
36. W.F. Savage, E.F. Nippes, and T.W. Miller: Weld J., 1976, vol. 55, pp. 181s–87s.
37. J. Keist: J. Mater., 2005, p. 36.
38. G. Al-Marahleh: J. Met. Sci. Heat Treatment, 2006, vol. 48, nos. 5–6, pp. 17–21.
39. S. Zajac, B. Hutchinson, A. Johanson, L.O. Gullman, and R. Lagneborg: J. Phys., 1993, vol. 3 (7), pp. 251–54.
40. I. Musulin and O.C. Celliers: Proc. TMS Annual Meeting on Light Metal, TMS, Warrendale, 1990, vol. 119, pp. 951–54.
41. B. Radhakrishnan and R.G. Thompson: Metall. Trans. A, 1992, vol. 23A, pp. 1783–99.10.1007/BF02804371 ↗
42. M.L. Santella, M.C. Maguire, and S.A. David: Weld. J., 1989, vol. 68, pp. 19s–27s.