In-Situ X-Ray Investigations and Computer Simulation during Continuous Heating of a Ball Bearing Steel
Source abstract
Abstract
This article presents a comparison between transformation kinetics obtained by in-situ X-ray diffraction during continuous heating of a ball bearing steel AISI 52100 to austenitizing temperature and computer simulation. In order to have acquisition times short enough for good time resolution, X-ray diffraction experiments were done with special equipment such as a rotating anode producing intense X-ray radiation and an area detector. Computer simulations of austenitizing were performed with a Johnson–Mehl–Avrami equation. Besides transformation kinetics, the lattice parameters of ferrite and austenite were also studied. Lattice parameters measured by in-situ X-ray diffraction match calculations from models. Good agreement between phase contents obtained by simulation and by X-ray diffraction was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. T. Hirsch: HTM Z. Werkst. Waermebeh. Fertigung, 2003, vol. 58, pp. 110–26
2. F. Hoffmann, O. Kessler, Th. Lübben, P. Mayr: Heat Treatment Met., 2004, vol. 2, pp. 27–30
3. H. Surm, O. Kessler, M. Hunkel, F. Hoffmann, and P. Mayr: Proc. 2nd Int. Conf. on Thermal Process Modelling and Computer Simulation; S. Denis, P. Archambault, J.M. Berghau, and R. Fortunier: J. Phys. IV, 2004, vol. 120, pp. 111–1910.1051/jp4:2004120012 ↗
4. M. Rodriguez: in Industrial Applications of X-ray Diffraction, F.H. Chung and D.K. Smith, eds., Marcel Dekker Inc., New York, NY, 2000, p. 891
5. A. Rocha, T. Hirsch: Mater. Sci. Eng., 2005, vol. A395, pp. 195–20710.1016/j.msea.2004.12.022 ↗
6. W.G. Wood: Metals Handbook, 9th ed. vol. 5, ASM, Metals Park, OH, 1982, pp. 303–09
7. R.A. Young: in The Rietveld Method, R.A. Young, ed., IUCr Book Series, Oxford University Press, Oxford, United Kingdom, 1993, pp. 1–39
8. H. Surm, O. Keßler, M Hunkel, F. Hoffmann, and P. Mayr: Proc. 3rd Int. Conf. on Thermal Process Modelling and Computer Simulation, Budapest, 2006, pp. 26–28
9. A. Jablonka, K. Harste, K. Schwerdtfeger: Steel Res., 1991, vol. 62, pp. 24–3310.1002/srin.199101722 ↗
10. G. Reichelt: Ph.D. Thesis, Technical University of Berlin, Berlin, 1982
11. V. Hauk: Structural and Residual Stress Analysis by Non-Destructive Methods, Evaluation, Application, Assessment, Elsevier, New York, NY, 1997
12. J. Gegner: Komplexe Diffusionsprozesse in Metallen, Expert Verlag, Renningen, Germany, 2006, pp. 154–63
13. D.D.L. Chung, P.W. Dehaven, H. Arnold, D. Ghosh: X-Ray Diffraction at Elevated Temperatures, VCH Publishers, New York, NY, 1993
14. ASM Ready Reference: Thermal Properties of Metals, ASM INTERNATIONAL, Materials Park, OH, 2002, p. 22
15. W.B. Pearson: Handbook of Lattice Spacings and Structures of Metals, Metal Physics and Physical Metallurgy, New York, 1964, vol. 4
16. M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, S. van der Zwaag: Acta Metall. Mater., 1993, vol. 29, pp. 1011–16
17. S.F. Dirnfeld, B.M. Korevaar, F. Van`t Spijker: Härterei-Technische Mitteilungen, 1975, vol. 30, pp. 197–203