journal article·2015-06

Oxidation Behavior of Germanium- and/or Silicon-Bearing Near-α Titanium Alloys in Air

Tomonori Kitashima, Yoko Yamabe-Mitarai

Publisher page

Abstract

The effect of germanium (Ge) and/or silicon (Si) addition on the oxidation behavior of the near-α alloy Ti-5Al-2Sn-4Zr-2Mo was investigated in air at 973 K (700 °C). Ge addition decreased the oxidation resistance because of the formation of a Ge-rich layer in the substrate at the TiO2/substrate interface, enhancing Sn segregation at the interface. In addition, a small amount of Ge dissolved in the external Al2O3 layer. These results reduced the aluminum activity at the interface, suppressed the formation of Al2O3, and increased the diffusivity of oxygen in the oxide scales. The addition of 0.2 and 0.9 wt pct Si was beneficial for improving oxidation resistance. The effect of germanide and silicide precipitates in the matrix on the oxide growth process was also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. M. Simnad, A. Spliners, and O. Katz: J. Met., 1955, vol. 597, pp. 212–18.
2. P. Kofstad, P.B. Anderson, and O.J. Krudtaa: J. Less Common Met., 1961, vol. 3, pp. 89–97.10.1016/0022-5088(61)90001-7 ↗
3. J. Stringer: Acta Meter., 1960, vol. 8, pp. 758–66.10.1016/0001-6160(60)90170-X ↗
4. T. Kitashima, L.J. Liu, and H. Murakami: J. Electrochem. Soc., 2013, vol. 160, pp. C441–44.10.1149/2.100309jes ↗
5. K.S. McReynolds and S. Tamirisakandala: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1732–36.10.1007/s11661-011-0710-3 ↗
6. T.A. Wallace: Titanium ’ 95, Science and Technology, Institute of Materials, London, 1996, pp. 1943–50.
7. H.L. Du, P.K. Datta, D.B. Lewis, and J.S. Burnell-Gray: Corros. Sci., 1994, vol. 36, pp. 631–42.10.1016/0010-938X(94)90069-8 ↗
8. C. Leyens, M. Peter, and W.A. Kaysser: Mater. Sci. Technol., 1996, vol. 12, pp. 213–18.10.1179/mst.1996.12.3.213 ↗
9. C. Leyens, M. Peter, W.A. Kaysser: Mater. Sci. Forum, 1997, vol. 251–254, pp. 769–76.10.4028/www.scientific.net/MSF.251-254.769 ↗
10. A.M. Chaze and C. Coddet: Oxid. Met., 1987, vol. 28, pp. 61–71.10.1007/BF00666471 ↗
11. A.M. Chaze and C. Coddet: Oxid. Met., 1987, vol. 27, pp. 1–20.10.1007/BF00656726 ↗
12. A.M. Chaze and C. Coddet: J. Mater. Sci., 1987, vol. 22, pp. 1206–14.10.1007/BF01233110 ↗
13. A.M. Chaze and C. Coddet: J. Less Common Met., 1990, vol. 157, pp. 55–70.10.1016/0022-5088(90)90406-A ↗
14. T.J. Johnson, M.H. Loretto, and M.W. Kearns: Titanium ’ 92, Science and Technology, TMS, PA, 1993, pp. 2035–42.
15. A.P. Woodfield, P.J. Postans, M.H. Loretto, and R.E. Smallman: Acta Metall., 1988, vol. 36, pp. 507–15.10.1016/0001-6160(88)90082-X ↗
16. D.F. Neal and S.P. Fox: Titanium ’ 92, Science and Technology, TMS, PA, 1993, pp. 287–94.
17. M. Kehoe and R.W. Broomfield: Titanium Science and Technology, Plenum Press, NY, 1973, pp. 2167–78.
18. V.J. Erdeman and E.W. Ross: The Science, Technology and Application of Titanium, Pergamon Press, Oxford, 1970, pp. 829–37.10.1016/B978-0-08-006564-9.50090-7 ↗
19. T. Kitashima, K.S. Suresh, and Y. Yamabe-Mitarai: Mater. Sci. Eng. A, 2014, vol. 597, pp. 212–18.10.1016/j.msea.2013.12.099 ↗
20. A. Gagnoud, J. Etay, and M. Garnier: Trans. Iron Steel Inst. Jpn., 1988, vol. 28, pp. 36–40.10.2355/isijinternational1966.28.36 ↗
21. ASTM E562: “Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count”, Annual Book of ASTM Standards, ASTM International, PA, 2005, vol. 3.01, pp. 570–76.
22. K.S. Suresh, T. Kitashima, Y. Yamabe-Mitarai: Mater. Sci. Forum, 2014, vol. 783–786, pp. 602–606.10.4028/www.scientific.net/MSF.783-786.602 ↗
23. S. Becker, A. Rahmel, M. Schorr, and M. Schiitze: Oxid. Met., 1992, vol. 38, pp. 425–64.10.1007/BF00665663 ↗
24. K.L. Luthra: Oxid. Met., 1992, vol. 38, pp. 475–90.
25. K. Maki, M. Shioda, M. Sayashi, T. Shimizu, and S. Isobe: Mater. Sci. Eng. A, 1992, vol. 153, pp. 591–96.10.1016/0921-5093(92)90256-Z ↗
26. D. Vojtech, B. Bartova, and T. Kubatik: Mater. Sci. Eng. A, 2003, vol. 361, pp. 50–57.10.1016/S0921-5093(03)00564-1 ↗
27. E.M. Kenina, I.I. Kornilov, and V.V. Vanilova: Met. Sci. Heat Treat., 1972, vol. 14, pp. 396–98.10.1007/BF00649818 ↗