Creep Behavior and Damage of Ni-Base Superalloys PM 1000 and PM 3030
Source abstract
Abstract
Two oxide dispersion strengthening (ODS) nickel-base superalloys, a solely dispersion-strengthened alloy (PM 1000) and an additionally γ′-strengthened alloy (PM 3030) are investigated regarding creep resistance at temperatures between 600 °C and 1000 °C. The creep strength advantage of PM 3030 over PM 1000 decreases as the temperature increases due to the thermal instability of the γ′ phase. The particle strengthening contribution in both alloys increases linearly with load. However, solid solution softening leads to an apparent drop in particle strengthening in PM 1000. Deformation concentration in slip bands is more accentuated in PM 3030-R34 due to additional γ′ strengthening combined with strongly textured coarse and elongated grain structure. Finer, equiaxed grains reduce creep strength at higher temperatures due to grain boundary deformation processes and premature pore formation, but have only minor impact at low and intermediate temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. B. deMestral, G. Eggeler, and H.J. Klam: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 879–90.10.1007/BF02649755 ↗
2. J.J. Stevens and W.D. Nix: Metall. Mater. Trans. A, 1985, vol. 16A, pp. 1307–24.10.1007/BF02670335 ↗
3. H. Biermann: Habilitation Thesis, University of Erlangen-Nürnberg, Fortschritt-Berichte VDI, Düsseldorf, 1999.
4. M. Nganbe: Dissertation Thesis, University of Dresden, Cuviller Verlag, Göttingen, 2002.
5. M. Heilmaier: Dissertation Thesis, University of Erlangen-Nürnberg, Fortschritt-Berichte VDI, Düsseldorf, 1993.
6. M. Heilmaier and B. Reppich: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3861–70.10.1007/BF02595635 ↗
7. J.S. Benjamin: Metall. Trans., 1970, vol. 1, pp. 2943–51.10.1007/BF03037835 ↗
8. R.L. Cairns, L.R. Curwick, and J.S. Benjamin: Metall. Trans. A, 1975, vol. 6A, pp. 179–88.10.1007/BF02673686 ↗
9. R. Fernandez and G. Gonzalez-Donsel: Acta Mater., 2008, vol. 56, pp. 2549–62.10.1016/j.actamat.2008.01.037 ↗
10. F.R.N. Nabarro and H.L. Villiers: The Physics of Creep: Creep and Creep-Resistant Alloys, Taylor & Francis, London, 1995.
11. H.J. Frost and M.F. Ashby: Deformation-Mechanism-Maps. The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, United Kingdom, 1982.
12. G.E. Dieter: Mechanical Metallurgy, SI Metric Editions, McGraw-Hill Book Company, London, 1986.
13. F.E.H. Müller, M. Nganbe, H.J. Klauss and M. Heilmaier: J. Adv. Mater., 2000, vol. 32, pp. 9–20.
14. M. Nganbe and M. Heilmaier: Int. J. Plast., 2009, vol. 25, pp. 822–37.10.1016/j.ijplas.2008.06.005 ↗
15. J.S. Benjamin and T.E. Volin: Metall. Trans., 1974, vol. 5, pp. 1929–34.10.1007/BF02644161 ↗
16. E. Arzt: Res. Mech., 1991, vol. 31, pp. 399–453.
17. J.H. Weber and M.J. Bomford: Mater. Trans. A, 1976, vol. 7A, pp. 435–41.10.1007/BF02642841 ↗
18. L.P. Kubin, B. Lisiecki, and P. Garon: Phil. Mag. A, 1995, vol. 71A, pp. 991–1009.10.1080/01418619508236233 ↗
19. J.D. Whittenberger: Mater. Trans. A, 1984, vol. 15A, pp. 1753–62.10.1007/BF02666358 ↗
20. D. Bettge, W. Oesterle, and J. Ziebs: Z. Metallkd., 1995, vol. 86, pp. 190–97.
21. M. Heilmaier, M. Nganbe, and F.E.H. Müller: Proc. 9th Int. Symp. on Superalloys, T.M. Pollock and R.D. Kissinger, eds., Elsevier, Amsterdam, 2000, pp. 287–98.
22. J.K. Gregory, J.G. Gibeling, and W.D. Nix: Mater. Trans. A, 1985, vol. 16A, pp. 777–87.10.1007/BF02814828 ↗
23. T. Hayashi, P.M. Sarosi, J.H. Schneibel, and M.J. Mills: Acta Mater., 2008, vol. 56, pp. 1407–16.10.1016/j.actamat.2007.11.038 ↗
24. Y. Estrin, M. Heilmaier, and G. Drew: Mater. Sci. Eng. A, 1999, vol. 272 (1A), pp. 163–73.10.1016/S0921-5093(99)00455-4 ↗
25. W.C. Oliver and W.D. Nix: Acta Metall., 1982, vol. 30, pp. 1335–47.10.1016/0001-6160(82)90153-5 ↗
26. J. Lin and O.D. Sherby: Res. Mech. A, 1980, vols. 291A–293A, pp. 251–93.
27. E. Arzt and D.S. Wilkinson: Acta Metall., 1986, vol. 34, pp. 1893–98.10.1016/0001-6160(86)90247-6 ↗
28. E. Arzt and J. Rösler: Acta Metall., 1988, vol. 36, pp. 1053–60.10.1016/0001-6160(88)90159-9 ↗
29. J. Čadek, H. Oikawa, and V. Sustek: Mater. Sci. Eng. A, 1995, vol. 190A, pp. 9–23.10.1016/0921-5093(94)09605-V ↗
30. M.E. Kassner and M.T. Perez-Prado: Fundamentals of Creep in Metals and Alloys, Elsevier, Amsterdam, 2004.
31. B. Reppich: Z. Metallkd., 2002, vol. 93, pp. 605–13.10.3139/146.020605 ↗
32. R.W. Lund and W.D. Nix: Acta Metall., 1976, vol. 24, pp. 469–81.10.1016/0001-6160(76)90068-7 ↗
33. J. Čadek: Creep of Metallic Materials, Elsevier, Amsterdam, 1990.
34. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. Am. Soc. Met., 1969, vol. 62, pp. 155–79.
35. J. Rösler and E. Arzt: Acta Metall. Mater., 1990, vol. 38, pp. 671–83.10.1016/0956-7151(90)90223-4 ↗
36. J. Rösler, R. Joos, and E. Arzt: Metall. Trans. A, 1992, vol. 23A, pp. 1521–32.10.1007/BF02647335 ↗
37. M. Nganbe and M. Heilmaier: Mater. Sci. Eng. A, 2004, vols. 387A–389A, pp. 609–12.10.1016/j.msea.2004.01.109 ↗
38. R. Lagneborg and B. Bergman: Met. Sci., 1976, vol. 10, pp. 20–28.10.1179/030634576790431462 ↗
39. B. Reppich: Z. Metallkd., 1982, vol. 73, pp. 69–67.
40. B. Reppich, H. Bügler, R. Leistner, and M. Schütze: 2nd Int. Conf. on Creep and Fracture of Engineering Materials and Structures, B. Wilshire and D.R.J. Owen, eds., Pineridge Press, Swansea, 1984, pp. 279–97 and 299–305.
41. J.D. Parker and B. Wilshire: Met. Sci., 1975, vol. 9, pp. 248–52.10.1179/030634575790445053 ↗
42. K.R. Williams and B. Wilshire: Met. Sci., 1973, vol. 7, pp. 176–79.10.1016/0036-9748(73)90193-2 ↗
43. M. Heilmaier and B. Reppich: Proc. 5th Int. Conf. on Creep and Fracture of Engineering Materials and Structures, B. Wilshire and R.W. Evans, eds., The Institute of Materials, London, 1993, pp. 231–44.
44. K.P. Rohrback: Aircraft Eng. Aerospace Technol., 1998, vol. 7, pp. 209–14.10.1108/00022669810693549 ↗
45. M. Heilmaier, F.E.H. Müller, G. Eisenmeier, and M. Reppich: Scripta Mater., 1998, vol. 39, pp. 1365–70.10.1016/S1359-6462(98)00322-4 ↗
46. E. Arzt and M.F. Ashby: Scripta Mater., 1982, vol. 16, pp. 1285–90.10.1016/0036-9748(82)90484-7 ↗
47. B. Reppich: Acta Mater., 1998, vol. 46, pp. 61–67.10.1016/S1359-6454(97)00234-6 ↗
48. Y. Estrin, S. Arndt, M. Heilmaier, and Y. Brechet: Acta Mater., 1999, vol. 47, pp. 595–606.10.1016/S1359-6454(98)00362-0 ↗
49. M. Rumi: Dissertation Thesis, University of Berlin, Berlin, 2000.
50. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 40, pp. 1–30.10.1016/0956-7151(92)90195-K ↗
51. C. Mayr, G. Eggeler, and A. Dlouhy: Mater. Sci. Eng. A, 1996, vol. 207A, pp. 51–63.10.1016/0921-5093(96)80002-5 ↗
52. A. Dlouhy, R. Schäublin, and G. Eggeler: Scripta Mater., 1998, vol. 39, pp. 1325–32.10.1016/S1359-6462(98)00251-6 ↗
53. J. Auerswald, D. Mukherji, W. Chen, and R.P. Wahi: in Low Cycle Fatigue and Elasto-Plastic Behavior of Materials, K.T. Rie, and P.D. Portella, eds., Elsevier, Amsterdam, 1998, pp. 351–56.10.1016/B978-008043326-4/50061-1 ↗
54. K. Yashiro, F. Kurose, Y. Nakashima, K. Kubo, Y. Tomita, and H.M. Zbib: Int. J. Plast., 2006, vol. 22, pp. 713–23.10.1016/j.ijplas.2005.05.004 ↗
55. J.X. Zhang, T. Murakumo, Y. Koizumi, T. Kobayashi, and H. Harada: Acta Mater., 2003, vol. 51, pp. 5073–81.10.1016/S1359-6454(03)00355-0 ↗
56. F.R.N. Nabarro and M.S. Duesbery: Dislocations in Solids, vol. 10, L1 2 Ordered Alloys, North-Holland Publishing Company, Amsterdam, 1996.
57. R. Behr, J. Mayer, and E. Arzt: Scripta Metall., 1997, vol. 36, pp. 341–45.10.1016/S1359-6462(96)00378-8 ↗
58. S.M. Copley and B.H. Kear: Trans. TMS-AIME, 1967, vol. 239, pp. 977–84.
59. S.M. Copley and B.H. Kear: Trans. TMS-AIME, 1967, vol. 239, pp. 984–92.
60. M. Heilmaier and B. Reppich: Mater. Sci. Eng. A, 1997, vols. 234A–236A, pp. 501–04.10.1016/S0921-5093(97)00258-X ↗