Crossed-Wire Laser Microwelding of Pt-10 Pct Ir to 316 LVM Stainless Steel: Part II. Effect of Orientation on Joining Mechanism
Source abstract
Abstract
With the increasing complexity of medical devices and with efforts to reduce manufacturing costs, challenges arise in joining dissimilar materials. In this study, the laser weldability of dissimilar joints between Pt-10 pct Ir and 316 low-carbon vacuum melted (LVM) stainless steel (SS) crossed wires was investigated by characterizing the weld geometry, joint strength, morphology of weld cross sections, and differences in joining behavior, depending on which material is subject to the incident laser beam. With the Pt-Ir alloy on top, a significant amount of porosity was observed on the surface of the welds as well as throughout the weld cross sections. This unique form of porosity is believed to be a result of preferential vaporization of 316 LVM SS alloying elements that become mixed with the molten Pt-10 pct Ir during welding. The joining mechanism documented in micrographs of cross-sectioned welds was found to transition from laser brazing to fusion welding. It is inferred that the orientation of the two dissimilar metals (i.e., which material is subject to the incident laser beam) plays an important role in weld quality of crossed-wire laser welds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Microjoining and Nanojoining, Y. Zhou, ed., Woodhead Publishing Ltd., Cambridge, United Kingdom, 2008.
2. J. Xie and S. Safarevich: Proc. Materials and Process for Medical Devices Conf. (MPMD), Anaheim, CA, Sept. 2003, pp. 25–30.
3. N.J. Noolu, H.W. Kerr, Y. Zhou, and J. Xie: Mater. Sci. Eng. A, 2005, vol. 397, pp. 8–15.10.1016/j.msea.2004.12.044 ↗
4. I. Khan and Y. Zhou: Proc. Materials and Processes for Medical Devices Conf. (MPMD), Palm Springs, CA, Sept. 2007, pp. 38–41.
5. D.R. Haynes, T.N. Crotti, and M.R. Haywood: J. Biomed. Mater., 2000, vol. 49 (2), pp. 167–75.10.1002/(SICI)1097-4636(200002)49:2<167::AID-JBM3>3.0.CO;2-9 ↗
6. S. Fukumoto and Y. Zhou: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3165–76.10.1007/s11661-004-0061-4 ↗
7. S. Fukumoto, Z. Chen, and Y. Zhou: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2717–24.10.1007/s11661-005-0268-z ↗
8. Z. Chen: J. Mater. Sci., 2007, vol. 42, pp. 5756–65.10.1007/s10853-006-0671-x ↗
9. K.J. Ely and Y. Zhou: Sci. Technol. Weld. Join., 2001, vol. 6 (2), pp. 63–72.10.1179/136217101101538541 ↗
10. Y.D. Huang, A. Pequegnat, J.C. Feng, M.I. Khan, and Y. Zhou: Sci. Technol. Weld. Join., 2011, vol. 16 (7), pp. 648–56.10.1179/1362171811Y.0000000059 ↗
11. W. Tan, Y. Zhou, and H.W. Kerr: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2667–76.10.1007/s11661-002-0388-7 ↗
12. M.I. Khan, J.M. Kim, M.L. Kuntz, and Y. Zhou: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 910–19.10.1007/s11661-009-9780-x ↗
13. S. Fukumoto, T. Matsuo, H. Tsubakino, and A. Yamamoto: Mater. Trans., 2007, vol. 48 (4), pp. 813–20.10.2320/matertrans.48.813 ↗
14. G.S. Zou, Y.D. Huang, A. Pequegnat, X.G. Li, M.I. Khan, X.B. Hu, and Y. Zhou: Metall. Mater. Trans. A. DOI:10.1007/s11661-011-0763-3.10.1007/s11661-011-0763-3 ↗
15. Binary Alloy Phase Diagrams, T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 3, p. 2344.
16. L. Yu, K. Nakata, and J. Liao: Sci. Technol. Weld. Join., 2009, vol. 14 (6), pp. 554–58.10.1179/136217109X441209 ↗
17. S. Beretta and B. Previtali: Sci. Technol. Weld. Join., 2009, vol. 14 (2), pp. 106–16.10.1179/136217108X372577 ↗
18. A. Haboudou, P. Peyre, A.B. Vannes, and G. Peix: Mater. Sci. Eng. A, 2003, vol. A363, pp. 40–48.10.1016/S0921-5093(03)00637-3 ↗
19. A. Matsunawa, M. Mizutani, S. Katayama, and N. Seto: Weld. Int., 2002, vol. 17 (6), pp. 431–37.10.1533/wint.2003.3138 ↗
20. AWS Welding Handbook, 9th ed., vol. 3, Welding Processes Part 2, American Welding Society, Miami, FL, 2007.
21. M. Pastor, H. Zhao, R.P. Martukanitz, and T. Debroy: Weld. J., 1999, vol. 78 (6), pp. 207s–216s.
22. X. He, T. DebRoy, and P.W. Fuerschbach: J. Phys. D: Appl. Phys., 2003, vol. 36, pp. 3079–88.10.1088/0022-3727/36/23/033 ↗
23. R. Hultgren, R.L. Orr, P.D. Anderson, and K.K. Kelley: Selected Values of Thermodynamic Properties of Metals and Alloys, John Wiley & Sons, Inc., New York, NY, 1963.