High Wear Resistance of White Cast Iron Treated by Novel Process: Principle and Mechanism
Source abstract
Abstract
Based on microstructure desired, a novel process is proposed to treat Fe-2.4C-12.0Cr (mass pct) white cast iron balls, that is, destabilizing heat treatment following multicycle quenching and sub-critical treatment (De-MQ-Sct) process, and such a complex process is simply performed by alternate water quenching and air cooling. For comparison, the white cast iron balls also were treated by conventional normalization (NOR) process and Oil-quenching process, respectively. The partitioning of carbon from martensite to retained austenite during De-MQ-Sct process promotes the interaction between carbide precipitation and martensitic transformation, while this interaction is a unique effect only produced by multicycle quenching linking destabilizing and sub-critical treatments, which leads to more and finer secondary carbides and more carbon-enriched austenite in De-MQ-Sct sample than those in NOR or Oil-quenching sample. The average hardness of 60 HRC and impact toughness of 12.6 J/cm2 are obtained in De-MQ-Sct white cast iron balls, which are much higher than those in NOR and Oil-quenching ones. The wear behaviours measured by pin-on-disk wear tests indicate that the weight loss of De-MQ-Sct sample is only about one third of the NOR sample and one half of the Oil-quenching sample. Microstructural characterization reveals that high wear resistance related to hardness and toughness of the De-MQ-Sct balls are mainly attributed to the considerable fine secondary carbides and stable carbon-enriched retained austenite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. L.E. Svensson, H.K.D.H. Bhadeshia, B. Gretoft, and B. Ulander: J.Mater. Sci., 1986, vol. 21, pp. 1015-1019.10.1007/BF01117388 ↗
2. Neville A, Reza F, Chiovelli S, et al.: Metall. Mater. Trans. A, 2006, 37, pp. 2339-2347.10.1007/BF02586208 ↗
3. J.T.H. Pearce, D.W.L. Elwell, J Mater Sci Lett. 5(1986)1063-1064.10.1007/BF01730284 ↗
4. A. Wiengmoon, T. Chairuangsri, A. Brown, R. Brydson, D.V. Edmods, J.T.H. Pearce, Acta Mater. 53(2005) 4143-4154.10.1016/j.actamat.2005.05.019 ↗
5. M. Janssen, M.B. Van Leeuwen, M.F. Mendes de Leon: Proceedings of the 14th European Conference on Fracture, A. Neimitz et al., eds., Emas Publications, London, 2002, pp. 617–25.
6. K.-H.Z. Gahr and D.V. Doane: Metall. Trans. A, 1980, vol. 11A,pp. 613-20.10.1007/BF02670698 ↗
7. C.K. Kim, S. Lee, J.-Y. Jung: Metall. Mater. Trans. A 37;633-643 (2006).10.1007/s11661-006-0035-9 ↗
8. A. Bedolla-Jacuinde, M.W. Rainforth, I. Mejia: Metall Mater Trans A 2013; 44: 852-857.
9. Xiaohui Zhi, Jiandong Xing, Hanguang Fu, Yiming Gao, Mater Charact 2008; 59: 1221-1226.10.1016/j.matchar.2007.10.010 ↗
10. X.H.Tang,R.Chung,C.J.Pang,D.Y.Li,B.Hinckley,K.Dolman, Wear 2011, 271: 1426-1431 .10.1016/j.wear.2010.11.047 ↗
11. Zhongli Liu,Yanxiang Li,Xiang Chen,KaiHua Hu, MAT SCI ENG A 2008, 486: 112-116.10.1016/j.msea.2007.10.017 ↗
12. Chen Xiang, Li Yanxiang, Mater Sci Eng A 2010, 528:770-775.10.1016/j.msea.2010.09.092 ↗
13. Rodenburg C, Rainforth W M. Acta Materialia, 2007, 55(7): 2443-2454.10.1016/j.actamat.2006.11.039 ↗
14. A. Bedolla-jacuinde, S.L. Aguilar, B. Hernandez, J. Mater. Eng. Perform. 14(2005) 149-157.10.1361/10599490523300 ↗
15. A. Wiengmoon, J. T. H. Pearce, T. Chairuangsri, Mater. Chem. Phys. 125(2011) 739-748.10.1016/j.matchemphys.2010.09.064 ↗
16. Hakan Gasan, Fatin Erturk, Metall. Mater. Trans. A 44A(2013) 4493-5005.
17. Tabrett CP, Sare IR, Ghomashchi MR: Int Mater Rev. 1996; 41: 59-82.10.1179/imr.1996.41.2.59 ↗
18. Wang J, Li C, Liu H, et al. Materials characterization, 2006, 56(1): 73-78.10.1016/j.matchar.2005.10.002 ↗
19. J. Wang, R.L. Zuo, Z.P. Sun, C. Li, H.H. Liu, H.S. Yang, B.L. Shen, S.J. Huang: Mater. Charact. 55: 234-240 (2005).10.1016/j.matchar.2005.06.002 ↗
20. H-H Liu, J Wang, B-L Shen, H-S Yang, S-J Gao, S-J Huang: Mater. Des. 28: 1059-1064 (2007).10.1016/j.matdes.2005.09.007 ↗
21. Jia X, Hao Q, Zuo X, et al. Materials Science and Engineering: A, 2014, 618: 96-103.10.1016/j.msea.2014.08.075 ↗
22. G. Laird II, G.L.F. Powell: Metall. Mater. Trans. A 24: 981-988 (1993).10.1007/BF02656520 ↗
23. C.P. Tabrett, I.R. Sare, Scr. Mater. 12(1998) 1747-1753.10.1016/S1359-6462(98)00118-3 ↗
24. Sare I R, Arnold B K. Metallurgical and Materials Transactions A, 1995, 26: 1785-1793.10.1007/BF02670766 ↗
25. Bedolla-Jacuinde A, Rainforth M W, Mejía I. Metallurgical and Materials Transactions A, 2013, 44: 856-872.10.1007/s11661-012-1434-8 ↗
26. X.W. Zuo, N.L. Chen, F. Gao,Y H. Rong, International Heat Treatment and Surface Engineering 8(2014) 15-23.10.1179/1749514813Z.00000000078 ↗
27. Zhu X, Li W, Zhao H, et al. International Journal of Hydrogen Energy, 2013, 38(25): 10694-10703.10.1016/j.ijhydene.2013.05.113 ↗
28. S. Zhou, K. Zhang, N.L. Chen, J.F. Gu, YH Rong: ISIJ Int. 51: 1688-1695 (2011).10.2355/isijinternational.51.1688 ↗
29. Tabrett CP, Sare IR: Wear, 1997, 203: 206-219.10.1016/S0043-1648(96)07390-5 ↗
30. J. Speer, D.K. Matlock, B.C. De Cooman, Schroth J.G.: Acta Mater. 51: 2611-2622; (2003).10.1016/S1359-6454(03)00059-4 ↗
31. Hsu TY: Mater. Sci. Forum (2007) 561:2283-2286.10.4028/www.scientific.net/MSF.561-565.2283 ↗
32. Zhang K, Xu W Z, Guo Z H, Rong Y H, Wang M Q, Dong H. Acta Metall Sin, 2011; 47: 489.
33. Zhong N, Wang X D, Wang L, Rong Y H. Mater Sci Eng, 2009; A506: 111.10.1016/j.msea.2008.11.014 ↗
34. Wang X D, Zhong N, Rong Y H, Xu Z Y. J Mater Res, 2009; 24: 261.
35. V.F. Zackay, E.R. Parker, D. Fahr, R. Busch, ASM Trans. Quart. 60 (1967) 252.
36. D. Webster, ASM Trans. Quart. 61(1968) 816.