journal article·2022-08

Wettability and Rheological Behavior of Low Ag Lead-Free SAC/Graphene and Cobalt-Graphene Nanocomposite Solder Paste

M. Tamizi, M. Movahedi, A. H. Kokabi, Y. Miyashita, S. Azghandi Rad

Publisher page

Abstract

The impacts of dopant nanoparticles, graphene nanosheets (GNSs) and cobalt decorated-graphene nanosheets (CoGNSs), were studied in relation to the wettability and rheological behavior in low-Ag lead-free SAC0307 (Sn–0.3Ag–0.7Cu) solder paste. The solidification range of the solders was evaluated using differential scanning calorimetry. Phase identification in the solder bulk and interface of the solder and copper substrate was carried out by X-ray diffraction and energy-dispersive X-ray spectroscopy. Spreading properties and reactive wetting behavior along with the rheological properties of the solders were also studied. Results showed that the addition of both nanoparticles did not considerably change the melting point of SAC0307 solder. During the reflow soldering, GNSs floated away and separated from the solder bulk because of their low density and inappropriate wetting by the molten tin because of the nonmetallic nature of GNSs. However, CoGNS nanoparticles resulted in better wettability and fluidity of the solder because of the modified density of CoGNS particles and better coherency of the metallic cobalt/tin interface as well as the increased active absorption surface on the copper substrate. The fluidity of solder including CoGNSs was significantly higher compared to the solder with GNSs in the solidification range. Additionally, CoGNSs played an important role in the interfacial reactions by forming the refined (Co,Cu)6Sn5 compound with a flat morphology, which promoted reactive wetting.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. L. Zhang, C. He, Y. Guo, J. Han, Y. Zhang, and X. Wang: Microelectron. Reliab., 2012, vol. 52, pp. 559–78.10.1016/j.microrel.2011.10.006 ↗
2. J.H. Lau and N.C. Lee: Assembly and Reliability of Lead-Free Solder Joints, Springer, New York, 2020, pp. 63–134.
3. S. Cheng and C.M. Huang: Microelectron. Reliab., 2017, vol. 75, pp. 77–95.10.1016/j.microrel.2017.06.016 ↗
4. M.L. Li, L. Zhang, N. Jiang, L. Zhang, and S. Juan Zhong: Mater. Des., 2021, vol. 197, pp. 109–224.
5. D.H. Jung, A. Sharma, D.U. Lim, J.H. Yun, and J.P. Jung: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4372–84.10.1007/s11661-017-4178-7 ↗
6. T. Gancarz, J. Pstruś, S. Mosińska, and S. Pawlak: Metall. Mater. Trans. A, 2017, vol. 47A, pp. 368–77.10.1007/s11661-015-3220-x ↗
7. E.E.M. Noor, A. Singh, and Y.T. Chuan: Solder. Surf. Mt. Technol., 2013, vol. 25, pp. 229–41.10.1108/SSMT-11-2012-0026 ↗
8. H. Ma and J.C. Suhling: J. Mater. Sci., 2009, vol. 44, pp. 1141–58.10.1007/s10853-008-3125-9 ↗
9. A. Sharma, H.R. Sohn, and J.P. Jung: Metall. Mater. Trans. A, 2016, vol. A47, pp. 494–503.10.1007/s11661-015-3214-8 ↗
10. X. Yubao, T. Liu, L. Zhengyang, G. Li, Y. Shuang, H. Noriyuki, R. Zhongming, and Q. Wang: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 2333–43.
11. A. Sharma, A.K. Srivastava, and B. Ahn: Metall. Mater. Trans. A, 2019, vol. 50A(11), pp. 5384–94.10.1007/s11661-019-05439-y ↗
12. Z. Zhang, X. Hu, X. Jiang, and Y. Li: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 480–92.10.1007/s11661-018-4983-7 ↗
13. G. Humpston and D.M. Jacobson: Principles of Soldering, ASM International, Materials Park, 2004, pp. 12–25.10.31399/asm.tb.ps.9781627083522 ↗
14. J.W. Evans: A Guide to Lead-free Solders, Springer, London, 2007, pp. 53–77.
15. M.Y. Tan, M.B. Zhou, J.Q. Huang, F.Q. Ma, X. Ma, and X.P. Zhang: 17th Int. Conf. Electron. Packag. Technol., 2016, pp. 974–78.10.1109/ICEPT.2016.7583290 ↗
16. T.K. Lee, T.R. Bieler, C. Kim, and H. Ma: Fundamentals of Lead-Free Solder Interconnect Technology, Springer, Boston, 2015, pp. 21–42.
17. Y. Tian, Y.C. Chan, J.K.L. Lai, and S.T.F. Pak: IEEE Trans. Compon. Packag. Manuf. Technol. B, 1997, vol. 20, pp. 146–51.10.1109/96.575566 ↗
18. J.S. Lee, J.H. Kim, and K.W. Paik: IEEE Trans. Compon. Packag. Manuf. Technol., 2018, vol. 8, pp. 1316–22.10.1109/TCPMT.2018.2836982 ↗
19. Y. Tang, S. Luo, G. Li, Z. Yang, and C. Hou: Solder. Surf. Mt. Technol., 2018, vol. 30, pp. 153–63.10.1108/SSMT-10-2017-0027 ↗
20. S. Chellvarajoo, M.Z. Abdullah, and C.Y. Khor: Mater. Des., 2015, vol. 82, pp. 206–15.10.1016/j.matdes.2015.05.065 ↗
21. H. Sun, Y.C. Chan, and F. Wu: J. Mater. Sci. Mater. Electron., 2015, vol. 26, pp. 5318–25.10.1007/s10854-015-3071-7 ↗
22. S. Chellvarajoo, M.Z. Abdullah, and Z. Samsudin: Mater. Des., 2015, vol. 67, pp. 197–208.10.1016/j.matdes.2014.11.025 ↗
23. S. Choi, J.P. Lucas, K.N. Subramanian, and T.R. Bieler: J. Mater. Sci. Mater. Electron., 2000, vol. 11(6), pp. 497–502.10.1023/A:1008968518512 ↗
24. M.A. Dudek and N. Chawla: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 610–20.10.1007/s11661-009-0146-1 ↗
25. J.W. Yoon, Y.H. Lee, D.G. Kim, H.B. Kang, S.J. Suh, C.W. Yang, C.B. Lee, J.M. Jung, C.S. Yoo, and S.B. Jung: J. Alloys Compd., 2004, vol. 381(1–2), pp. 151–57.10.1016/j.jallcom.2004.03.076 ↗
26. B.C. Rao, J. Weng, L. Shen, T.K. Lee, and K.Y. Zeng: Microelectron. Eng., 2010, vol. 87(11), pp. 2416–22.10.1016/j.mee.2010.04.017 ↗
27. M. Amagai: Microelectron. Reliab., 2008, vol. 48(1), pp. 1–16.10.1016/j.microrel.2007.05.004 ↗
28. J. Gong, C. Liu, P.P. Conway, and V.V. Silberschmidt: Acta Mater., 2008, vol. 56(16), pp. 4291–97.10.1016/j.actamat.2008.04.063 ↗
29. J. Gong, C. Liu, P.P. Conway, and V.V. Silberschmidt: Scripta Mater., 2009, vol. 60(5), pp. 333–35.10.1016/j.scriptamat.2008.10.029 ↗
30. Z. Mei, A.J. Sunwoo, and J.W. Morris: Metall. Trans. A, 1992, vol. 23A, pp. 857–64.10.1007/BF02675563 ↗
31. Y. Wu, J.A. Sees, C. Pouraghabagher, L.A. Foster, J.L. Marshall, E.G. Jacobs, and R.F. Pinizzotto: J. Electron. Mater., 1993, vol. 22(7), pp. 769–77.10.1007/BF02817353 ↗
32. Y. Wang, J. Huang, and Z. Ye: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 3038–43.10.1007/s11661-019-05259-0 ↗
33. Y. Sohn: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 2905–14.10.1007/s11661-020-05739-8 ↗
34. C.H. Chen, P.I. Lee, W.T. Yeh, and T.H. Chuang: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 1–11.10.1007/s11661-021-06484-2 ↗
35. H.Y. Zhao, J.H. Liu, Z.L. Li, X.G. Song, Y.X. Zhao, H.W. Niu, H. Tian, H.J. Dong, and J.C. Feng: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 2739–49.10.1007/s11661-018-4664-6 ↗
36. A. Yakymovych, V. Sklyarchuk, Y. Plevachuk, and B. Sokoliuk: J. Mater. Eng. Perform., 2016, vol. 25, pp. 4437–43.10.1007/s11665-016-2297-8 ↗
37. A. Yakymovych, H. Weber, I. Kaban, and H. Ipser: J. Mol. Liq., 2018, vol. 268, pp. 176–80.10.1016/j.molliq.2018.07.069 ↗
38. A. Singh and R. Durairaj: MATEC Web Conf., 2018, vol. 237, pp. 1–4.10.1051/matecconf/201823702013 ↗
39. N.S.M. Zaimi, M.A.A.M. Salleh, A.M.M. AlBakri, R.M. Said, and N. Saud: Solid State Phenom., 2018, vol. 280, pp. 169–74.10.4028/www.scientific.net/SSP.280.169 ↗
40. M. Hosking and F.G. Yost: The Mechanics of Solder Alloy Wetting and Spreading, 1st ed., Springer, New York, 2012.
41. Z.L. Ma, S.A. Belyakov, and C.M. Gourlay: J. Alloys Compd., 2016, vol. 682, pp. 326–37.10.1016/j.jallcom.2016.04.265 ↗
42. X. Ren, Y. Wang, L. Zou, X. Liu, and N. Zhao: Mater. Charact., 2021, vol. 182, p. 111530.10.1016/j.matchar.2021.111530 ↗
43. I.E. Anderson, J.C. Foley, B.A. Cook, J.L. Harringa, R.L. Terpstra, and O. Unal: J. Electron. Mater., 2001, vol. 30, p. 1050.10.1007/s11664-001-0129-5 ↗
44. J. Wu, S. Xue, J. Wang, and M. Wu: J. Alloys Compd., 2019, vol. 784, pp. 471–87.10.1016/j.jallcom.2019.01.034 ↗
45. T.F. Tian, W.H. Li, J. Ding, G. Alici, and H. Du: Smart Mater. Struct., 2012, vol. 12, p. 125009.10.1088/0964-1726/21/12/125009 ↗
46. L. Zhang and K.N. Tu: Mater. Sci. Eng. R, 2014, vol. 82, pp. 1–32.10.1016/j.mser.2014.06.001 ↗
47. C.H. Du, M. Tang, G.S. Gan, T. Wang, W.C. Huang, M.M. Cao, and C.T. Li: Appl. Mech. Mater., 2012, vol. 236, pp. 31–37.10.4028/www.scientific.net/AMM.236-237.31 ↗
48. Q.J. Zhai, S.K. Guan, and Q.Y. Shang: Alloy Thermo-mechanism: Theory and Application, Metallurgy Industry Press, Beijing, 1999.
49. J. Shen and Y.C. Chan: J. Alloys Compd., 2009, vol. 477, pp. 909–14.10.1016/j.jallcom.2008.11.015 ↗
50. G.K. Sujan, A.S.M.A. Haseeb, H. Nishikawa, and M.A. Amalina: J. Alloys Compd., 2017, vol. 695, pp. 981–90.10.1016/j.jallcom.2016.10.219 ↗
51. L. Xu, L. Wang, H. Jing, X. Liu, J. Wei, and Y. Han: J. Alloys Compd., 2015, vol. 650, pp. 475–81.10.1016/j.jallcom.2015.08.018 ↗
52. F. Ga, T. Takemoto, and H. Nishikawa: Mater. Sci. Eng. A, 2006, vol. 420, pp. 39–46.10.1016/j.msea.2006.01.032 ↗
53. P. Yao, X. Li, X. Liang, B. Yu, F. Jin, and Y. Li: Mater. Charact., 2017, vol. 131, pp. 49–63.10.1016/j.matchar.2017.06.033 ↗