journal article·2022-07

Roadmap to Improve the Printability of a Non-Castable Alloy for Additive Manufacturing

Tengteng Sun, Yakai Xiao, Guandong Luo, Huihui Yang, Yi Wu, Mingliang Wang, Hongze Wang, Haowei Wang

Publisher page

Abstract

The non-castable Al alloy can hardly be printed by additive manufacturing (AM), because of the serious hot cracking problem induced by the wide solidification range. Here, the in-situ mixing salt method in combination with gas atomization, which is suitable for mass AM production, is first proposed to produce the powders of conventional non-castable alloy, behaving with excellent printability. For example, the non-castable Al4Cu1.6Mg0.6Mn (A0T) alloy and the pre-decorated TiB2/Al4Cu1.6Mg0.6Mn (A2T) alloy powders are prepared and their printability is evaluated in the powder bed fusion technique. The results show that the cracks are eliminated in the as-printed A2T alloy caused by the introduction of TiB2 particles. In detail, the as-printed A2T alloy shows the novel fine equiaxed-columnar bimodal grain microstructure. It has the average grain size of the printed A2T alloy is ~ 5.2 μm, which is significantly reduced to ~ 38.8 μm in the as-printed A0T alloy. Therefore, the as-printed A2T alloy exhibits the improved ultimate tensile strength (~ 371.6 MPa) and total elongation at fracture (~ 7.1 pct). Generally, this manuscript suggests a roadmap to improve the printability of the non-castable alloy for mass AM production.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater Sci., 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
2. A. Wang, H. Wang, Y. Wu, and H. Wang: Int. J. Adv. Manuf. Technol., 2021, vol. 116, pp. 1–37.10.1007/s00170-021-07440-5 ↗
3. E.O. Olakanmi, R.F. Cochrane, and K.W. Dalgarno: Prog. Mater Sci., 2015, vol. 74, pp. 401–77.10.1016/j.pmatsci.2015.03.002 ↗
4. S.L. Sing, J. An, W.Y. Yeong, and F.E. Wiria: J. Orthop. Res., 2016, vol. 34, pp. 369–85.10.1002/jor.23075 ↗
5. K.G. Prashanth, S. Scudino, and J. Eckert: Acta Mater., 2017, vol. 126, pp. 25–35.10.1016/j.actamat.2016.12.044 ↗
6. N.T. Aboulkhair, I. Maskery, C. Tuck, I. Ashcroft, and N.M. Everitt: J. Mater. Process. Technol., 2016, vol. 230, pp. 88–98.10.1016/j.jmatprotec.2015.11.016 ↗
7. J. Zhang, B. Song, Q. Wei, D. Bourell, and Y. Shi: J. Mater. Sci. Technol., 2019, vol. 35, pp. 270–84.10.1016/j.jmst.2018.09.004 ↗
8. W. Li, S. Li, J. Liu, A. Zhang, Y. Zhou, Q. Wei, C. Yan, and Y. Shi: Mater. Sci. Eng. A, 2016, vol. 663, pp. 116–25.10.1016/j.msea.2016.03.088 ↗
9. N. Saunders, Z. Guo, X. Li, A.P. Miodownik, and J.-P. Schillé: JOM, 2003, vol. 55, pp. 60–65.10.1007/s11837-003-0013-2 ↗
10. T. DebRoy, T. Mukherjee, J.O. Milewski, J.W. Elmer, B. Ribic, J.J. Blecher, and W. Zhang: Nat. Mater., 2019, vol. 18, pp. 1026–32.10.1038/s41563-019-0408-2 ↗
11. J.H. Martin, B.D. Yahata, J.M. Hundley, J.A. Mayer, T.A. Schaedler, and T.M. Pollock: Nature, 2017, vol. 549, pp. 365–69.10.1038/nature23894 ↗
12. D. Low, T. Sumii, and M. Swain: J. Oral Rehabil., 2001, vol. 28, pp. 239–42.10.1111/j.1365-2842.2001.00664.x ↗
13. B. Basu, G.B. Raju, and A.K. Suri: Int. Mater. Rev., 2013, vol. 51, pp. 352–74.10.1179/174328006X102529 ↗
14. S.Y. Zhou, Y. Su, H. Wang, J. Enz, T. Ebel, and M. Yan: Addit. Manuf., 2020, vol. 36, 101458.
15. X. Liu, Y. Liu, Z. Zhou, K. Wang, Q. Zhan, and X. Xiao: Mater. Sci. Eng. A, 2021, vol. 813, p. 141171.10.1016/j.msea.2021.141171 ↗
16. Q. Tan, J. Zhang, Q. Sun, Z. Fan, G. Li, Y. Yin, Y. Liu, and M.-X. Zhang: Acta Mater., 2020, vol. 196, pp. 1–16.10.1016/j.actamat.2020.06.026 ↗
17. P. Mair, V.S. Goettgens, T. Rainer, N. Weinberger, I. Letofsky-Papst, S. Mitsche, and G. Leichtfried: J. Alloys Compd., 2021, vol. 863, 158714.10.1016/j.jallcom.2021.158714 ↗
18. P. Agrawal, S. Gupta, S. Thapliyal, S. Shukla, R.S. Haridas, and R.S. Mishra: Addit. Manuf., 2021, vol. 37, 101623.
19. L. Liu, T. Minasyan, R. Ivanov, S. Aydinyan, and I. Hussainova: Ceram. Int., 2020, vol. 46, pp. 21128–21135.10.1016/j.ceramint.2020.05.189 ↗
20. Z. Chen, G.A. Sun, Y. Wu, M.H. Mathon, A. Borbely, D. Chen, G. Ji, M.L. Wang, S.Y. Zhong, and H.W. Wang: Mater. Des., 2017, vol. 116, pp. 577–90.10.1016/j.matdes.2016.12.070 ↗
21. R. Li, Y. Shi, Z. Wang, L. Wang, J. Liu, and W. Jiang: Appl. Surf. Sci., 2010, vol. 256, pp. 4350–56.10.1016/j.apsusc.2010.02.030 ↗
22. Q. Yang, Y. Ma, Z. Chen, G. Ji, M.L. Wang, S.Y. Zhong, Y. Wu, V. Ji, and H.W. Wang: Materialia, 2019, vol. 8, 100458.10.1016/j.mtla.2019.100458 ↗
23. X.P. Li, G. Ji, Z. Chen, A. Addad, Y. Wu, H.W. Wang, J. Vleugels, J. Van Humbeeck, and J.P. Kruth: Acta Mater., 2017, vol. 129, pp. 183–93.10.1016/j.actamat.2017.02.062 ↗
24. D.W. Wang, Y.H. Zhou, J. Shen, Y. Liu, D.F. Li, Q. Zhou, G. Sha, P. Xu, T. Ebel, and M. Yan: Mater. Sci. Eng. A, 2019, vol. 762, p. 138078.10.1016/j.msea.2019.138078 ↗
25. H. Jia, H. Sun, H. Wang, Y. Wu, and H. Wang: Int. J. Adv. Manuf. Technol., 2021, vol. 113, pp. 2413–35.10.1007/s00170-021-06810-3 ↗
26. T. Sun, J. Geng, Z. Bian, Y. Wu, M. Wang, D. Chen, N. Ma, and H. Wang: Trans. Nonferrous Met. Soc., 2021, vol. 30(8), pp. 1–27.
27. H. Zhang, H. Zhu, T. Qi, Z. Hu, and X. Zeng: Mater. Sci. Eng. A, 2016, vol. 656, pp. 47–54.10.1016/j.msea.2015.12.101 ↗
28. Q. Tan, Y. Liu, Z. Fan, J. Zhang, Y. Yin, and M.-X. Zhang: J. Mater. Sci. Technol., 2020, vol. 58, pp. 34–45.10.1016/j.jmst.2020.03.070 ↗
29. N. Kaufmann, M. Imran, T.M. Wischeropp, C. Emmelmann, S. Siddique, and F. Walther: Phys. Procedia, 2016, vol. 83, pp. 918–26.10.1016/j.phpro.2016.08.096 ↗
30. P. Gao, W. Huang, H. Yang, G. Jing, Q. Liu, G. Wang, Z. Wang, and X. Zeng: J. Mater. Sci. Technol., 2020, vol. 39, pp. 144–54.10.1016/j.jmst.2019.08.026 ↗
31. H. Wang and Y. Zou: Int. J. Heat Mass Transf., 2019, vol. 142, pp. 118473.1–13.10.1016/j.ijheatmasstransfer.2019.118473 ↗
32. H.R. Wenk and P.V. Houtte: Rep. Prog. Phys., 2004, vol. 67, pp. 1367–1428.10.1088/0034-4885/67/8/R02 ↗
33. H.-Y. Zhang, J.-M. Li, J.-L. Sun, and B.-X. Wang: Heat Mass Transf., 2015, vol. 52, pp. 47–54.10.1007/s00231-015-1596-1 ↗
34. D.D. Gu, W. Meiners, K. Wissenbach, and R. Poprawe: Int. Mater. Rev., 2013, vol. 57, pp. 133–64.10.1179/1743280411Y.0000000014 ↗
35. B. Zhang, G. Bi, S. Nai, C.-N. Sun, and J. Wei: Opt. Laser Technol., 2016, vol. 80, pp. 186–95.10.1016/j.optlastec.2016.01.010 ↗
36. D. G. Eskin, Suyitno, and L. Katgerman: Prog. Mater Sci., 2004, vol. 49, pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
37. H.R. ZareieRajani and A.B. Phillion: Mater. Des., 2018, vol. 144, pp. 45–54.10.1016/j.matdes.2018.02.007 ↗
38. I. Farup, J.-M. Drezet, and M. Rappaz: Acta Mater., 2001, vol. 49, pp. 1261–69.10.1016/S1359-6454(01)00013-1 ↗
39. M.A. Easton, H. Wang, and J.F. Grandfield: Mater. Forum, 2004, vol. 28, pp. 224–29.
40. T. Böllinghaus: Hot Cracking Phenomena in Welds, Springer, Berlin, 2005.10.1007/b139103 ↗
41. J. Campbell: Casting, Oxford, 1991, pp. 209–32.
42. A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans, and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823–35.10.1016/S1359-6454(00)00094-X ↗
43. J.D. Hunt: Mater. Sci. Eng. B, 1984, vol. 65, pp. 75–83.10.1016/0025-5416(84)90201-5 ↗
44. O. Lopez-Botello, U. Martinez-Hernandez, J. Ramírez, C. Pinna, and K. Mumtaz: Mater. Des., 2017, vol. 113, pp. 369–76.10.1016/j.matdes.2016.10.031 ↗
45. C. Subramanian, T.S.R.C. Murthy, and A.K. Suri: Int. J. Refract. Met. Hard Mater., 2007, vol. 25, pp. 345–50.10.1016/j.ijrmhm.2006.09.003 ↗
46. Y. Ma, A. Addad, G. Ji, M.-X. Zhang, W. Lefebvre, Z. Chen, and V. Ji: Acta Mater., 2020, vol. 185, pp. 287–99.10.1016/j.actamat.2019.11.068 ↗
47. M. Easton and D. StJohn: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1613–23.10.1007/s11661-999-0098-5 ↗
48. B. AlMangour, D. Grzesiak, and J.-M. Yang: J. Alloys Compd., 2016, vol. 680, pp. 480–93.10.1016/j.jallcom.2016.04.156 ↗
49. T.C. Lin, C. Cao, M. Sokoluk, L. Jiang, X. Wang, J.M. Schoenung, E.J. Lavernia, and X. Li: Nat. Commun., 2019, vol. 10, p. 4124.10.1038/s41467-019-12047-2 ↗
50. P.K. Gokuldoss, S. Kolla, and J. Eckert: Materials (Basel), 2017, vol. 10, p. 672.10.3390/ma10060672 ↗
51. R. Ma, C. Peng, Z.C.R. Wang, Z. Zhou, X. Li, and X. Cao: J. Alloys Compd., 2020, vol. 815, 152422.10.1016/j.jallcom.2019.152422 ↗
52. J. Hu, Y.N. Shi, X. Sauvage, G. Sha, and K. Lu: Science, 2017, vol. 355, pp. 1292–96.10.1126/science.aal5166 ↗
53. T. Shanmugasundaram, M. Heilmaier, B.S. Murty, and V.S. Sarma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7821–25.10.1016/j.msea.2010.08.070 ↗
54. J. Zhang, B. Song, L. Yang, R. Liu, L. Zhang, and Y. Shi: Composites B, 2020, vol. 202, 108417.10.1016/j.compositesb.2020.108417 ↗
55. R. Hill: J. Mech. Phys. Solids, 1958, vol. 6, pp. 236–49.10.1016/0022-5096(58)90029-2 ↗
56. K. Ma, H. Wen, T. Hu, T.D. Topping, D. Isheim, D.N. Seidman, E.J. Lavernia, and J.M. Schoenung: Acta Mater., 2014, vol. 62, pp. 141–55.10.1016/j.actamat.2013.09.042 ↗
57. L. Lu, M.O. Lai, and F.L. Chen: Acta Mater., 1997, vol. 45, pp. 4297–4309.10.1016/S1359-6454(97)00075-X ↗
58. Y.K. Xiao, H. Chen, Z.Y. Bian, T.T. Sun, H. Ding, Q. Yang, Y. Wu, Q. Lian, Z. Chen, and H.W. Wang: J. Mater. Sci. Technol., 2022, vol. 109, pp. 254–66.10.1016/j.jmst.2021.08.030 ↗