Evolution of Texture, Strain, and Grain Boundary Constitution in Copper–Chromium Coatings and its Effect on Coating Corrosion Behavior
Source abstract
Abstract
Microstructural alterations in electrodeposited Cu–Cr coatings (1.5, 3.6, and 6.5 wt pct Cr) and their impact on the coating corrosion behavior have been investigated. The coatings obtained were compact and crack free. Compositional analysis of the coating cross section revealed the presence of Cr both within the grains and in the grain boundary regions. Analysis of the X-ray diffraction pattern revealed a decrease in the grain size and increase in the coating strain with increase in the Cr content. Potentiodynamic polarization and electrochemical impedance spectroscopy revealed that the corrosion resistance increased for initial additions of Cr (1.5 and 3.6 wt pct) and then it decreased for higher Cr content (6.5 wt pct). The corrosion current density (icorr) values obtained for pure copper, CuCr (1.5 wt pct), CuCr (3.6 wt pct), and CuCr (6.5 wt pct) coatings were 13.4, 11.2, 9.6, and 13.8 µA/cm2, respectively. The corresponding polarization resistance values (Rp) obtained were 1535.36, 1643.82, 1955.55, and 1512.28 Ω cm2, respectively. Electron-backscattered diffraction technique was used to correlate the electrochemical properties of the coatings with growth texture and grain boundary constitution. It was found that with the addition of Cr, there was a significant increase in the fraction of low-energy low-angle grain boundaries (LAGBs) which increased the corrosion resistance of the Cu-3.6wt pct Cr coating. The fractions of LAGBs for pure Cu and CuCr (3.6 wt pct) were 28 and 42 pct, respectively. Poor corrosion resistance in case of CuCr-3 coating containing maximum Cr content was due to the presence of high coating strain.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. S. Bououd, S. El-Aggadi, G. Kaichouh, K. Bouziane, A. El-Hourch, K. El-kacemi, and A. Guessous: Electrochim. Acta., 2020, https://doi.org/10.1016/j.electacta.2020.137670.10.1016/j.electacta.2020.137670 ↗
2. Y. Xu, Q. Lin, R. Ahmed, and G. Zangari: Electrochim. Acta., 2021, vol. 382, p. 138305.10.1016/j.electacta.2021.138305 ↗
3. A. Filgueira de Almeida, J.I. Venceslau de Souto, M. Lima dos Santos, R.A. Costa de Santana, J.J.N. Alves, A.R. Nascimento Campos, and S. Prasad: J. Alloys Compd., 2021, vol. 888, p. 161595.10.1016/j.jallcom.2021.161595 ↗
4. C.S. Lai, X.X. Hu, S. Yau, W.P. Dow, and Y.L. Lee: Electrochim. Acta., 2016, vol. 203, pp. 272–80.10.1016/j.electacta.2016.04.055 ↗
5. N. Rajasekaran, S. Mohan, J.A. Chelvane, and R. Jagannathan: J. Magn. Magn. Mater., 2012, vol. 324, pp. 2983–8.10.1016/j.jmmm.2012.04.027 ↗
6. X. Zheng, T. Ahmad, and W. Chen: Energy Storage Mater., 2021, vol. 39, pp. 365–94.10.1016/j.ensm.2021.04.027 ↗
7. M. Cetina-Dorantes, F.I. Lizama-Tzec, M.A. Estrella-Gutiérrez, D.M. Herrera-Zamora, O. Arés-Muzio, and G. Oskam: Electrochim. Acta., 2021, vol. 391, p. 138906.10.1016/j.electacta.2021.138906 ↗
8. H. Ruan, Y. Li, H. Qiu, and M. Wei: J. Alloys Compd., 2014, vol. 588, pp. 357–60.10.1016/j.jallcom.2013.11.070 ↗
9. O. El Khouja, A.C. Galca, K. Nouneh, M.Y. Zaki, M.E. Touhami, M. Taibi, E. Matei, C.C. Negrila, M. Enculescu, and L. Pintilie: Thin Solid Films., 2021, vol. 721, p. 138547.10.1016/j.tsf.2021.138547 ↗
10. S. Pandiyarajan, Z.C. Liu, A.H. Liao, M. Ganesan, S.T. Huang, C.T. Lee, and H.C. Chuang: Electrochim. Acta., 2021, vol. 387, p. 138543.10.1016/j.electacta.2021.138543 ↗
11. K. Pantleon and M.A.J. Somers: Scr. Mater., 2006, vol. 55, pp. 283–6.10.1016/j.scriptamat.2006.05.010 ↗
12. D.T. Read, Y.W. Cheng, and R. Geiss: Microelectron. Eng., 2004, vol. 75, pp. 63–70.10.1016/j.mee.2003.09.012 ↗
13. X. Zhan, J. Lian, H. Li, X. Wang, J. Zhou, K. Trieu, and X. Zhang: Electrochim. Acta., 2021, vol. 365, p. 137391.10.1016/j.electacta.2020.137391 ↗
14. M. Jung, G. Lee, and J. Choi: Electrochim. Acta., 2017, vol. 241, pp. 229–36.10.1016/j.electacta.2017.04.170 ↗
15. Y.V. Ivshin, F.N. Shaikhutdinova, and V.A. Sysoev: Surf. Eng. Appl. Electrochem., 2018, vol. 54, pp. 452–8.10.3103/S1068375518050046 ↗
16. J.C. Ballesteros, L.M. Torres-Martínez, I. Juárez-Ramírez, G. Trejo, and Y. Meas: J. Electroanal. Chem., 2014, vol. 727, pp. 104–12.10.1016/j.jelechem.2014.04.020 ↗
17. C. Han, Q. Liu, and D.G. Ivey: Electrochim. Acta., 2009, vol. 54, pp. 3419–27.10.1016/j.electacta.2008.12.064 ↗
18. L. Mattarozzi, S. Cattarin, N. Comisso, P. Guerriero, M. Musiani, L. Vázquez-Gómez, and E. Verlato: Electrochim. Acta., 2013, vol. 89, pp. 488–96.10.1016/j.electacta.2012.11.074 ↗
19. P.Y. Chen, M.J. Deng, and D.X. Zhuang: Electrochim. Acta., 2009, vol. 54, pp. 6935–40.10.1016/j.electacta.2009.07.016 ↗
20. Y.J. Su and C.U.A. Chisholm Watsont: Corros. Sci., 1993, vol. 35, pp. 1259–65.10.1016/0010-938X(93)90346-I ↗
21. H. Firouzi-Nerbin, F. Nasirpouri, and E. Moslehifard: J. Alloys Compd., 2020, vol. 822, p. 153712.10.1016/j.jallcom.2020.153712 ↗
22. H. Okamoto: J. Phase Equilibria Diffus., 2012, vol. 33, pp. 342–3.10.1007/s11669-012-0050-z ↗
23. S. Mandati and B.V. Sarada: Mater. Sci. Energy Technol., 2020, vol. 3, pp. 440–5.
24. U.S. Mohanty, B.C. Tripathy, S.C. Das, P. Singh, and V.N. Misra: Hydrometallurgy., 2009, vol. 100, pp. 60–4.10.1016/j.hydromet.2009.10.003 ↗
25. T.M. de Souza, D.C.B. de Lago, and L.F. de Sennaa: Mater. Res., 2018, https://doi.org/10.1590/1980-5373-MR-2018-0272.10.1590/1980-5373-MR-2018-0272 ↗
26. A. Brenner: Electrodepos. Alloys., 1963, vol. 1, p. 77.
27. M.J. Rahman, S.R. Sen, M. Moniruzzaman, and K.M. Shorowordi: J. Mech. Eng., 1970, vol. 40, pp. 9–14.10.3329/jme.v40i1.3468 ↗
28. S.R. Das, S. Shyamal, S.K. Shee, J.I. Kömi, and P. Sahu: Mater. Charact., 2020, https://doi.org/10.1016/j.matchar.2020.110833.10.1016/j.matchar.2020.110833 ↗
29. J. Weissmüller: Nanostruct. Mater., 1993, vol. 3, pp. 261–72.10.1016/0965-9773(93)90088-S ↗
30. A.J. Detor, M.K. Miller, and C.A. Schuh: Philos. Mag., 2006, vol. 86, pp. 4459–75.10.1080/14786430600726749 ↗
31. Z. Shi, M. Liu, and A. Atrens: Corros. Sci., 2010, vol. 52, pp. 579–88.10.1016/j.corsci.2009.10.016 ↗
32. M. Stern and A.L. Geary: J. Electrochem. Soc., 1957, vol. 104(1), pp. 56–63.10.1149/1.2428496 ↗
33. Y. Raghupathy, A. Kamboj, M.Y. Rekha, N.P. Narasimha Rao, and C. Srivastava: Thin Solid Films., 2017, vol. 636, pp. 107–15.10.1016/j.tsf.2017.05.042 ↗
34. M. Isakhani-Zakaria, S.R. Allahkaram, and H.A. Ramezani-Varzaneh: Corros. Sci., 2019, vol. 157, pp. 472–80.10.1016/j.corsci.2019.06.023 ↗
35. H. Fallahi and C. Davies: Mater. Sci. Eng. A., 2021, vol. 820, p. 141375.10.1016/j.msea.2021.141375 ↗
36. S.S. Rui, Q.N. Han, X. Wang, S. Li, X. Ma, Y. Su, Z. Cai, D. Du, and H.J. Shi: Mater. Today Commun., 2021, vol. 27, p. 102445.10.1016/j.mtcomm.2021.102445 ↗
37. L.Y. Zhao, H. Yan, R.S. Chen, and E.H. Han: Mater. Charact., 2020, vol. 170, p. 110697.10.1016/j.matchar.2020.110697 ↗
38. M. Coleman and V. Randle: Metall. Mater. Trans. A., 2008, vol. 39A, pp. 2175–83.10.1007/s11661-008-9574-6 ↗
39. V. Randle: J. Mater. Sci., 1995, vol. 30, pp. 3983–8.10.1007/BF00360697 ↗