journal article·2021-10Open access

The Mechanical Properties of Low Alloy TRIP-Aided Steel: The Role of Retained Austenite

Ravi Ranjan, Hossein Beladi, Peter D. Hodgson, Shiv Brat Singh

Abstract

Thermo-mechanical treatments were performed to exploit the recrystallisation and deformation induced ferrite transformation (DIFT) during processing and study their effect on the microstructure and strength-ductility balance of a low-carbon, low alloy CMnSiAl TRIP-aided steel containing a small amount of Mo and Nb. A particular focus of the work was to study the influence of prior transformation of retained austenite to martensite (i.e., absence of the TRIP effect) on the strength-ductility balance of the steel by comparing the tensile properties of samples quenched in water and in liquid nitrogen. It was observed that the formation of high carbon martensite as a result of the prior transformation of retained austenite does not necessarily lead to brittle failure. The work also revealed that the TRIP effect per se may not play a major role and it is the deformation of a composite microstructure comprising hard and soft phases, which allows TRIP aided steels to offer a better combination of mechanical properties (strength, ductility and strain hardening) in comparison with conventional high strength steels (HSS) like high strength interstitial free (HS-IF) steel and high strength low alloy steel (HSLA) and other first generation advanced high strength steels (AHSS) like dual phase (DP) steels. The new insight into the TRIP effect may further be exploited in the design of alloy composition and subsequent thermo-mechanical treatments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. S. Keeler, M. Kimchi, and P. J. Mconey: Advanced High-Strength Steels Application Guidelines V6.0. (WorldAutoSteel) 2017
2. E. De Moor: in High-Performance Ferrous Alloys. R. Rana, ed., Springer International Publishing, Cham, 2021, pp. 113–51.10.1007/978-3-030-53825-5_4 ↗
3. W. Bleck and P. Kriangyut: in Microstructure and Texture in Steels: And Other Materials. A. Haldar, S. Suwas, and B. Debashish, eds., Springer, New York, 2009.
4. K. Sugimoto and M. Mukherjee: in Radhakanta Rana. S.S. Brat, ed., Automotive Steels, Woodhead Publishing, Sawston, 2017, pp. 217–57.
5. W. Bleck, X. Guo, and Y. Ma: Steel Res. Int., 2017, vol. 88, p. 1700218.10.1002/srin.201700218 ↗
6. M. Soleimani, A. Kalhor, and H. Mirzadeh: Mater. Sci. Eng. A., 2020, vol. 795, p. 140023.10.1016/j.msea.2020.140023 ↗
7. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 570–79.10.2355/isijinternational1966.27.570 ↗
8. A.K. Srivastava, G. Jha, N. Gope, and S.B. Singh: Mater. Charact., 2006, vol. 57, pp. 127–35.10.1016/j.matchar.2006.01.010 ↗
9. P. Jacques, F. Delannay, X. Cornet, Ph. Harlet, and J. Ladriere: Metall. Mater. Trans. A., 1998, vol. 29, pp. 2383–93.10.1007/s11661-998-0114-1 ↗
10. T. De Cock, J.P. Ferrer, C. Capdevila, F.G. Caballero, V. López, and C.G. de Andrés: Scripta Mater., 2006, vol. 55, pp. 441–3.10.1016/j.scriptamat.2006.05.027 ↗
11. D.-W. Suh, S.-J. Park, T.-H. Lee, C.-S. Oh, and S.-J. Kim: Metall. Mater. Trans. A., 2009, vol. 41, pp. 397–408.10.1007/s11661-009-0124-7 ↗
12. C.G. Lee, S.-J. Kim, T.-H. Lee, and S. Lee: Mater. Sci. Eng. A., 2004, vol. 371, pp. 16–23.10.1016/S0921-5093(03)00035-2 ↗
13. X. Wei, R. Fu, and L. Li: Mater. Sci. Eng. A., 2007, vol. 465, pp. 260–66.10.1016/j.msea.2007.02.126 ↗
14. S.-J. Kim, C.G. Lee, T.-H. Lee, and C.-S. Oh: Scripta Mater., 2003, vol. 48, pp. 539–44.10.1016/S1359-6462(02)00477-3 ↗
15. M. De Meyer, D. Vanderschueren, and B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813–22.10.2355/isijinternational.39.813 ↗
16. S. Hashimoto, S. Ikeda, K.-I. Sugimoto, and S. Miyake: ISIJ Int., 2004, vol. 44, pp. 1590–98.10.2355/isijinternational.44.1590 ↗
17. M. Mukherjee, S.B. Singh, and O.N. Mohanty: Mater. Sci. Eng. A., 2008, vol. 486, pp. 32–7.10.1016/j.msea.2007.08.033 ↗
18. A.K. Srivastava, D. Bhattacharjee, G. Jha, N. Gope, and S.B. Singh: Mater. Sci. Eng. A., 2007, vol. 445, pp. 549–57.10.1016/j.msea.2006.09.101 ↗
19. T. Bhattacharyya, S.B. Singh, S. Das, A. Haldar, and D. Bhattacharjee: Mater. Sci. Eng. A., 2011, vol. 528, pp. 2394–400.10.1016/j.msea.2010.11.054 ↗
20. P.J. Jacques, F. Delannay, and J. Ladrière: Metall. Mater. Trans. A., 2001, vol. 32, pp. 2759–68.10.1007/s11661-001-1027-4 ↗
21. H. K. D. H. Bhadeshia, In Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, (The Royal Society: 2010), pp 3–18.10.1098/rspa.2009.0407 ↗
22. C. Garcia-Mateo and F.G. Caballero: Int. J. Mater. Res., 2007, vol. 98, pp. 137–43.10.3139/146.101440 ↗
23. F.G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D.G. Jones, and P. Brown: Mater. Sci. Technol., 2002, vol. 18, pp. 279–84.10.1179/026708301225000725 ↗
24. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1238–43.10.2355/isijinternational.43.1238 ↗
25. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1821–25.10.2355/isijinternational.43.1821 ↗
26. C. García-Mateo and F.G. Caballero: ISIJ Int., 2005, vol. 45, pp. 1736–40.10.2355/isijinternational.45.1736 ↗
27. T. Yokota, C.G. Mateo, and H.K.D.H. Bhadeshia: Scripta Mater., 2004, vol. 51, pp. 767–70.10.1016/j.scriptamat.2004.06.006 ↗
28. X.Y. Long, F.C. Zhang, J. Kang, B. Lv, and X.B. Shi: Mater. Sci. Eng. A., 2014, vol. 594, pp. 344–51.10.1016/j.msea.2013.11.089 ↗
29. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
30. J. G. Speer, A. M. Streicher, D. K. Matlock, F. Rizzo, G. Krauss (2003) In: E.B. Damm, Merwin M (eds). Austenite formation and Decomposition. ISS/TMS, Warrendale, pp 505-522.
31. D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A., 2006, vol. 438–440, pp. 25–34.10.1016/j.msea.2006.02.133 ↗
32. A.J. Clarke, J.G. Speer, D.K. Matlock, F.C. Rizzo, D.V. Edmonds, and M.J. Santofimia: Scripta Mater., 2009, vol. 61, pp. 149–52.10.1016/j.scriptamat.2009.03.021 ↗
33. D.K. Matlock, V.E. Bräutigam, and J.G. Speer: Mater. Sci. Forum., 2003, vol. 426, pp. 1089–94.10.4028/www.scientific.net/MSF.426-432.1089 ↗
34. M.J. Santofimia, L. Zhao, and J. Sietsma: Metall. Mater. Trans. A., 2008, vol. 40, pp. 46–57.10.1007/s11661-008-9701-4 ↗
35. X.D. Wang, N. Zhong, Y.H. Rong, T.Y. Hsu, and L. Wang: J. Mater. Res., 2009, vol. 24, pp. 260–67.10.1557/JMR.2009.0029 ↗
36. E.J. Seo, L. Cho, and B.C. De Cooman: Acta Mater., 2016, vol. 107, pp. 354–65.10.1016/j.actamat.2016.01.059 ↗
37. E.J. Seo, L. Cho, Y. Estrin, and B.C. De Cooman: Acta Mater., 2016, vol. 113, pp. 124–39.10.1016/j.actamat.2016.04.048 ↗
38. J.G. Speer, E. De Moor, and A.J. Clarke: Mater. Sci. Technol., 2015, vol. 31, pp. 3–9.10.1179/1743284714Y.0000000628 ↗
39. S. Samanta, S. Das, D. Chakrabarti, I. Samajdar, S.B. Singh, and A. Haldar: Metall. Mater. Trans. A., 2013, vol. 44, pp. 5653–64.10.1007/s11661-013-1929-y ↗
40. H.K.D.H. Bhadeshia: ISIJ Int., 2002, vol. 42, pp. 1059–60.10.2355/isijinternational.42.1059 ↗
41. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
42. H. K. D. H. Bhadeshia, C. M. Wayman (2014) In: David E. Laughlin and Hono (ed.). Kazuhiro Physical Metallurgy (Fifth Edition). Elsevier, Oxford,
43. H.K.D.H. Bhadeshia: Theory of Transformations in Steels. CRC Press, Routledge, 2021.10.1201/9781003056782 ↗
44. M. Mukherjee, S.B. Singh, and O.N. Mohanty: Metall. Mater. Trans. A., 2008, vol. 39, pp. 2319–28.10.1007/s11661-008-9599-x ↗
45. P.J. Jacques, E. Girault, Ph. Harlet, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1061–67.10.2355/isijinternational.41.1061 ↗
46. G. Krauss: Steels: Processing, Structure, and Performance. 2nd ed. ASM International, Russell Township, 2015.10.31399/asm.tb.spsp2.9781627082655 ↗
47. P.S. Houghton: Heat Treatment of Metals for Manufacturing Processes and Service. Machinery Publishing Company, Chennai, 1960.
48. G.E. Totten: Handbook of Residual Stress and Deformation of Steel. ASM International, Russell Township, 2002.
49. J.B. Cohen, T. Bell, K. Funatani, G.E. Totten, ASM International, A.S.M.H.T.S.C. Exposition and A.S.M.H.T. Society: Heat Treating: Including Advances in Surface Engineering, an International Symposium in Honor of Professor Tom Bell, and Professor Jerome B. Cohen Memorial Symposium on Residual Stresses in the Heat Treatment Industry : Proceedings of the 20th Conference, 9-12 October 2000, St. Louis, Missouri. (ASM International, 2000).
50. H. Yamagata: The Science and Technology of Materials in Automotive Engines. Elsevier Science, Amsterdam , 2005.10.1201/9780203024089 ↗
51. M.Y. Sherif, C.G. Mateo, T. Sourmail, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2004, vol. 20, pp. 319–22.10.1179/026708304225011180 ↗
52. M. Mukherjee, S.B. Singh, and O.N. Mohanty: Mater. Sci. Technol., 2007, vol. 23, pp. 338–46.10.1179/174328407X161150 ↗
53. M. Mukherjee, S.B. Singh, and O.N. Mohanty: Mater. Sci. Eng. A., 2006, vol. 434, pp. 237–45.10.1016/j.msea.2006.06.076 ↗
54. A. Razavykia, C. Delprete, and P. Baldissera: Materials., 2019, vol. 12, p. 3302.10.3390/ma12203302 ↗
55. A.J. Vimal, A. Bensely, D.M. Lal, and K. Srinivasan: Mater. Manuf. Proces., 2008, vol. 23, pp. 369–76.10.1080/10426910801938098 ↗
56. S. Li, Y. Xie, and Wu. Xiaochun: Cryogenics., 2010, vol. 50, pp. 89–92.10.1016/j.cryogenics.2009.12.005 ↗
57. W.C. Leslie: The Physical Metallurgy of Steels. McGraw-Hill International Book Company, London, 1981.
58. H. Bhadeshia and R. Honeycombe: Steels: Microstructure and Properties. Elsevier Science, Amsterdam, 2017.
59. F. HajyAkbary, M.J. Santofimia, and J. Sietsma: Adv. Mater. Res., 2014, vol. 28, pp. 100–4.
60. F. HajyAkbary, J. Sietsma, G. Miyamoto, T. Furuhara, and M.J. Santofimia: Acta Mater., 2016, vol. 104, pp. 72–83.10.1016/j.actamat.2015.11.032 ↗
61. B. Eghbali and A. Abdollah-Zadeh: Mater. Des., 2007, vol. 28, pp. 1021–26.10.1016/j.matdes.2005.11.006 ↗
62. M.R. Hickson, P.J. Hurley, R.K. Gibbs, G.L. Kelly, and P.D. Hodgson: Metall. Mater. Trans. A., 2002, vol. 33, pp. 1019–26.10.1007/s11661-002-0203-5 ↗
63. Y. Matsumura and H. Yada: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 492–8.10.2355/isijinternational1966.27.492 ↗
64. C. Ghosh, V.V. Basabe, and J.J. Jonas: Steel Res. Int., 2013, vol. 84, pp. 490–4.10.1002/srin.201200188 ↗
65. H. Dong and X. Sun: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 269–76.10.1016/j.cossms.2006.02.014 ↗
66. P.J. Hurley and P.D. Hodgson: Mater. Sci. Technol., 2001, vol. 17, pp. 1360–8.10.1179/026708301101509566 ↗
67. H. Dong and X. Sun: in Ultra-Fine Grained Steels. Y. Weng, ed., Y Springer, Berlin, 2009, pp. 86–136.10.1007/978-3-540-77230-9_3 ↗
68. P.J. Hurley and P.D. Hodgson: Mater. Sci. Eng. A., 2001, vol. 302, pp. 206–14.10.1016/S0921-5093(00)01823-2 ↗
69. B. Mintz and J.J. Jonas: Mater. Sci. Technol., 1994, vol. 10, pp. 721–7.10.1179/mst.1994.10.8.721 ↗
70. B. Mintz, J. Lewis, and J.J. Jonas: Mater. Sci. Technol., 1997, vol. 13, pp. 379–88.10.1179/mst.1997.13.5.379 ↗
71. D.N. Hanlon, J. Sietsma, and S. van der Zwaag: ISIJ Int., 2001, vol. 41, pp. 1028–36.10.2355/isijinternational.41.1028 ↗
72. R. Ranjan, H. Beladi, S.B. Singh, and P.D. Hodgson: Metall. Mater. Trans. A., 2015, vol. 46, pp. 3232–47.10.1007/s11661-015-2885-5 ↗
73. R. Ranjan and S.B. Singh: Metall. Mater. Trans. A., 2017, vol. 49, pp. 88–93.10.1007/s11661-017-4419-9 ↗
74. R. Ranjan and S.B. Singh: Metall. Mater. Trans. A., 2018, vol. 49, pp. 4474–83.10.1007/s11661-018-4754-5 ↗
75. R. Ranjan, T. Bhattacharyya, and S.B. Singh: in Advanced High Strength Steel: Processing and Applications. T.K. Roy, B. Bhattacharya, C. Ghosh, and S.K. Ajmani, eds., Springer, Singapore, 2018, pp. 27–38.10.1007/978-981-10-7892-7_4 ↗
76. T. Tanaka, T. Enami, M. Kimura, Y. Saito, T. Hatomura, A.J. De Ardo, G.A. Ratz, and P.J. Wray: AIME. Warrendale, PA, 1982.
77. C. Ouchi, T. Sampei, and I. Kozasu: Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 214–22.10.2355/isijinternational1966.22.214 ↗
78. F.B. Pickering: Physical Metallurgy and the Design of Steels. Applied Science Publishers, London, 1978.
79. T. Gladman: The Physical Metallurgy of Microalloyed Steels. Maney for the Institute of Materials, London, 2002.
80. I. Tamura, H. Sekine, and T. Tanaka: Thermomechanical Processing of High-Strength Low-Alloy Steels. Elsevier Science, Amsterdam, 2013.
81. E. Essadiqi and J.J. Jonas: Metall. Trans. A., 1988, vol. 19, pp. 417–26.10.1007/BF02649255 ↗
82. ASM International and J.J. Friel: Practical Guide to Image Analysis. ASM International, Russell Township, 2000.
83. G.F.V. Voort: Metallography. Principles and Practice, ASM International, Russell Township, 1999.
84. J.N. Huang, Z.Y. Tang, H. Ding, H. Zhang, L.L. Bi, and R.D.K. Misra: Mater. Sci.Eng. A., 2019, vol. 764, pp. 13–8231.10.1016/j.msea.2019.138231 ↗
85. Z. Li and D. Wu: ISIJ Int., 2006, vol. 46, pp. 121–8.10.2355/isijinternational.46.121 ↗
86. A. Kozłowska and A. Grajcar: Materials., 2020, vol. 13, p. 5284.10.3390/ma13225284 ↗
87. P.J. Jacques, Q. Furnémont, F. Lani, T. Pardoen, and F. Delannay: Acta Mater., 2007, vol. 55, pp. 3681–93.10.1016/j.actamat.2007.02.029 ↗
88. C. Wang, H. Ding, M. Cai, and B. Rolfe: Mater. Sci. Eng. A., 2014, vol. 610, pp. 65–75.10.1016/j.msea.2014.05.029 ↗
89. B. Fu, W.Y. Yang, M.Y. Lu, Q. Feng, L.F. Li, and Z.Q. Sun: Mater. Sci. Eng. A., 2012, vol. 536, pp. 265–68.10.1016/j.msea.2012.01.012 ↗
90. J. Chiang, J.D. Boyd, and A.K. Pilkey: Mater. Sci. Eng. A., 2015, vol. 638, pp. 132–42.10.1016/j.msea.2015.03.069 ↗
91. S. Li, R. Zhu, I. Karaman, and R. Arróyave: Acta Mater., 2012, vol. 60, pp. 6120–30.10.1016/j.actamat.2012.07.054 ↗
92. H.S. Park, J.C. Han, N.S. Lim, J.-B. Seol, and C.G. Park: Mater. Sci. Eng. A., 2015, vol. 627, pp. 262–69.10.1016/j.msea.2015.01.005 ↗
93. M. Dickson: J. Appl. Crystallogr., 1969, vol. 2, pp. 176–80.10.1107/S0021889869006881 ↗
94. B.D. Cullity and S.R. Stock: Elements of X-Ray Diffraction: Pearson New. International Pearson Education Limited, London, 2013.
95. D.J. Dyson and B. Holmes: J Iron Steel Inst., 1970, vol. 208, pp. 469–74.
96. H.K.D.H. Bhadeshia: Bainite in Steels: Theory and Practice. 3rd ed. CRC Press, London, 2019.10.1201/9781315096674 ↗
97. S.B. Singh: in Elena Pereloma. D.V. Edmonds, ed., Phase Transformations in Steels. Woodhead Publishing, Cambridge, 2012, pp. 385–416.
98. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Mater. Trans. A., 1981, vol. 12, pp. 1419–28.10.1007/BF02643686 ↗
99. D.-W. Suh, Oh. Chang-Seok, and S.-J. Kim: Met. Mater. Int., 2008, vol. 14, pp. 275–82.10.3365/met.mat.2008.06.275 ↗
100. J.M. Choi, B.J. Park, K.S. Lee, and K.J. Lee: Mater. Sci. Forum., 2010, vol. 638–642, pp. 3331–36.10.4028/www.scientific.net/MSF.638-642.3331 ↗