journal article·2021-07Open access

Deformation Behaviour of a FAST Diffusion Bond Processed from Dissimilar Titanium Alloy Powders

Oliver Levano Blanch, David Lunt, Gavin J. Baxter, Martin Jackson

Abstract

Abstract Titanium alloys have a high strength-to-weight ratio, fatigue performance and excellent corrosion resistance, and therefore are widely used in the aerospace sector due to their ability to withstand severe mechanical and thermal stresses in service. There are numerous cases where it would be desirable to use different titanium alloys in defined subcomponent regions to improve performance and efficiency. Conventional processing routes do not permit components to be produced with multiple titanium alloys and thus, design efficiency and optimization of component properties is compromised or over-engineered. In this study, a hybrid solid-state consolidation route is presented whereby field assisted sintering technology (FAST) is exploited to diffusion bond (DB) dissimilar titanium alloy powders in defined regions—a process termed FAST-DB. Titanium alloy powders Ti-6Al-4V (Ti-64) and Ti-6Al-2Sn-4Zr-2Mo (Ti-6242) were bonded using FAST in order to study the tensile deformation behavior and strain localization across a dissimilar alloy solid-state bond. FAST-DB was carried out at the sub- and super- beta transus temperatures of both alloys to generate dissimilar microstructure morphologies across the bond. In all cases, diffusion bonds showed excellent structural integrity with no defects and a smooth hardness profile across the bond. The deformation characteristics of the bonds was studied using two different tensile test approaches. The first approach used ASTM standard specimens to measure the mechanical properties of FAST-DB samples and study the location of the tensile failure. The second approach used a microtester and optical Digital Image Correlation to capture the grain interaction in the bond region under tensile loading. The work demonstrated that the diffusion bond remains intact and that tensile failure occurs in Ti-64 (i.e. the lower strength alloy) and is independent of the grain crystal orientation. The results from this study will provide materials engineers confidence in nesting FAST-DB technology in future near net shape manufacturing routes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. 1 V.A. Joshi: An Atlas of Structures and Fracture Features, 1st Edition, CRC Press, Boca Raton, FL, 2006, pp. 7-15.10.1201/9781420006063.ch2 ↗
2. 2 A.P. Mouritz: Introduction to Aerospace Materials, 1st Edition, Woodhead, Cambridge, UK, 2012, pp.15-38.10.1533/9780857095152 ↗
3. 3 G. Lutjering and J.C. Williams: Titanium, 2nd Edition, Springer, New York, NY, 2007, pp.15-50.
4. 4 C. Leyens and M. Peters: Titanium and Titanium Alloys,1st Edition, Wiley-Vch, Weinheim, DE, 2003, pp. 1-36.10.1002/3527602119 ↗
5. S. Babu, W. Peter, R. Dehoff, and L.J. Love, Report on Additive Manufacturing for Large-Scale Metals Workshop. (Oak Ridge National Laboratory, 2016) https://info.ornl.gov/sites/publications/files/Pub62831.pdf. Accessed 19 Nov 2020
6. 6 M. Suárez, A. Fernández, J.L. Menéndez, R. Torrecillas, H.U. Kessel, J. Hennicke, R. Kirchner, and T. Kessel: Sintering Applications, 1st Edition, IntechOpen, London, UK, 2013, pp. 319–42.
7. 7 O. Guillon, J. Gonzalez-Julian, B. Dargatz, T. Kessel, G. Schierning, J. Räthel, and M. Herrmann: Adv. Eng. Mater., 2014, vol. 16 (7), pp. 830–49.10.1002/adem.201300409 ↗
8. 8 Z.Y. Hu, Z.H. Zhang, X.W. Cheng, F.C. Wang, Y.F. Zhang, and S.L. Li: Mater. Des., 2020, vol. 191, p. 108662.10.1016/j.matdes.2020.108662 ↗
9. 9 N.S. Weston, B. Thomas, and M. Jackson: Mater. Sci. Technol., 2019, vol. 35 (11), pp. 1306–28.10.1080/02670836.2019.1620538 ↗
10. 10 S. Deng, R. Li, T. Yuan, P. Cao, and S. Xie: Metall. Mater. Trans. A, 2019, vol. 50 (6), pp. 2886–97.10.1007/s11661-019-05201-4 ↗
11. 11 Z. Trzaska, R. Cours, and J. Monchoux: Metall. Mater. Trans. A, 2018, vol. 49 (10), pp. 4849–59.10.1007/s11661-018-4775-0 ↗
12. 12 R. Li, T. Yuan, X. Liu, and K. Zhou: Scr. Mater., 2016, vol. 110, pp. 105–8.10.1016/j.scriptamat.2015.08.012 ↗
13. 13 R. Li, P. Niu, S. Deng, T. Yuan, and G. Liu: Metall. Mater. Trans. B, 2020, vol. 51 (1), pp. 6–10.10.1007/s11663-019-01725-7 ↗
14. 14 J.P. Kelly and O.A. Graeve: JOM, 2015, vol. 67 (1), pp. 29–33.10.1007/s11837-014-1202-x ↗
15. 15 C. Manière, L. Durand, A. Weibel, G. Chevallier, and C. Estournès: Scr. Mater., 2016, vol. 124, pp. 126–8.10.1016/j.scriptamat.2016.07.006 ↗
16. C. Manière, E. Torresani, and E.A. Olevsky (2019) Materials 12(4): 557.10.3390/ma12040557 ↗
17. 17 C. Manière, E. Nigito, L. Durand, A. Weibel, Y. Beynet, and C. Estournès: Powder Technol., 2017, vol. 320, pp. 340–5.10.1016/j.powtec.2017.07.048 ↗
18. 18 T. Voisin, J.-P. Monchoux, L. Durand, N. Karnatak, M. Thomas, and A. Couret: Adv. Eng. Mater., 2015, vol. 17 (10), pp. 1408–13.10.1002/adem.201500019 ↗
19. 19 N.S. Weston and M. Jackson: J. Mater. Process. Technol., 2017, vol. 243, pp. 335–46.10.1016/j.jmatprotec.2016.12.013 ↗
20. 20 E. Calvert, B. Wynne, N. Weston, A. Tudball, and M. Jackson: J. Mater. Process. Technol., 2018, vol. 254, pp. 158–70.10.1016/j.jmatprotec.2017.11.035 ↗
21. J Pope, M Jackson (2019) Metals, 9(6): 654.10.3390/met9060654 ↗
22. 22 O. Levano, N. Weston, J. Pope, A. Tudball, D. Lunn, G. Baxter, and M. Jackson: MATEC Web Conf., 2020, vol. 321, p. 03010.10.1051/matecconf/202032103010 ↗
23. N.S. Weston and M. Jackson (2020) Metals 10(2):296.10.3390/met10020296 ↗
24. 24 J.J. Pope, E.L. Calvert, N.S. Weston, and M. Jackson: J. Mater. Process. Technol., 2019, vol. 269, pp. 200–7.10.1016/j.jmatprotec.2019.02.011 ↗
25. 25 D. He, Z. Fu, W. Wang, J. Zhang, Z.A. Munir, and P. Liu: Mater. Sci. Eng. A, 2012, vol. 535, pp. 182–8.10.1016/j.msea.2011.12.061 ↗
26. 26 A. Miriyev, A. Stern, E. Tuval, S. Kalabukhov, Z. Hooper, and N. Frage: J. Mater. Process. Technol., 2013, vol. 213 (2), pp. 161–6.10.1016/j.jmatprotec.2012.09.017 ↗
27. N. NaveenKumar, G.D. JanakiRam, S.S. Bhattacharya, H.C. Dey, and S.K. Albert: Trans. Indian Inst. Met., 2015, vol. 213 (2), pp. 287–97.
28. P. Pripanapong, S. Kariya, T. Luangvaranunt, J. Umeda, S. Tsutsumi, M. Takahashi, and K. Kondoh: Materials (2016) 9(8): p. 665.10.3390/ma9080665 ↗
29. 29 P. Pripanapong, J. Umeda, H. Imai, M. Takahashi, and K. Kondoh: Int. J. Eng. Innov. Res., 2016, vol. 5 (4), pp. 253–9.
30. 30 K. Zhao, Y. Liu, L. Huang, B. Liu, and Y. He: J. Mater. Process. Technol., 2016, vol. 230, pp. 272–9.10.1016/j.jmatprotec.2015.11.030 ↗
31. 31 N. Vicente, A. Fedrizzi, N. Bazzanella, F. Casari, F. Buccioti, and A. Molinari: Powder Metall., 2013, vol. 56 (2), pp. 143–8.10.1179/1743290112Y.0000000040 ↗
32. 32 G. Martin, D. Fabrègue, F. Mercier, J.A. Chafino-Aixa, R. Dendievel, and J.J. Blandin: Scr. Mater., 2016, vol. 122, pp. 5–9.10.1016/j.scriptamat.2016.05.001 ↗
33. 33 J.C. Williams, R.G. Baggerly, and N.E. Paton: Metall. Mater. Trans. A, 2002, vol. 33 (3), pp. 837–50.10.1007/s11661-002-0153-y ↗
34. 34 H. Numakura, Y. Minonishi, and M. Koiwa: Scr. Metall., 1986, vol. 20 (11), pp. 1581–6.10.1016/0036-9748(86)90399-6 ↗
35. 35 Y. Minonishi, S. Morozumi, and H. Yoshinaga: Scr. Metall., 1982, vol. 16 (4), pp. 427–30.10.1016/0036-9748(82)90166-1 ↗
36. 36 I. Bantounas, D. Dye, and T.C. Lindley: Acta Mater., 2009, vol. 57 (12), pp. 3584–95.10.1016/j.actamat.2009.04.018 ↗
37. 37 W.B. Hutchinson and M.R. Barnett: Scr. Mater., 2010, vol. 63 (7), pp. 737–40.10.1016/j.scriptamat.2010.05.047 ↗
38. 38 S. Zaefferer: Mater. Sci. Eng. A, 2003, vol. 344 (1-2), pp. 20–30.10.1016/S0921-5093(02)00421-5 ↗
39. 39 I.P. Jones and W.B. Hutchinson: Acta Metall., 1981, vol. 63 (6), pp. 951–68.10.1016/0001-6160(81)90049-3 ↗
40. 40 F. Bridier, P. Villechaise, and J. Mendez: Acta Mater., 2005, vol. 53 (3), pp. 555–67.10.1016/j.actamat.2004.09.040 ↗
41. 41 D. Lunt, T. Busolo, X. Xu, J. Quinta da Fonseca, and M. Preuss: Acta Mater., 2017, vol. 129, pp. 72–82.10.1016/j.actamat.2017.02.068 ↗
42. 42 F. Hild and S. Roux: Exp. Mech., 2012, vol. 52 (9), pp. 1503–19.10.1007/s11340-012-9603-7 ↗
43. 43 F. Hild and S. Roux: Strain, 2006, vol. 42 (2), pp. 69–80.10.1111/j.1475-1305.2006.00258.x ↗
44. 44 J.Q. Da Fonseca, P.M. Mummery, and P.J. Withers: J. Microsc., 2005, vol. 218, pp. 9–21.10.1111/j.1365-2818.2005.01461.x ↗
45. B. Pan, K. Qian, H. Xie, and A. Asundi (2009) Meas. Sci. Technol. 20(10): 1052.
46. 46 P.D. Littlewood and A.J. Wilkinson: Int. J. Fatigue, 2012, vol. 43, pp. 111–9.10.1016/j.ijfatigue.2012.03.001 ↗
47. 47 D. Lunt, A. Ho, A. Davis, A. Harte, F. Martina, J. Quinta da Fonseca, and P. Prangnell: Mater. Sci. Eng. A, 2020, vol. 788, p. 139608.10.1016/j.msea.2020.139608 ↗
48. 48 D. Lunt, A. Ho, A. Davis, F. Martina, J. Hönnige, J. Quinta, and P. Prangnell: MATEC Web Conf., 2020, vol. 321, p. 03008.10.1051/matecconf/202032103008 ↗
49. ASTM E8/E8M-11: Standard Test Methods for Tesnion Testing of Metallic Materials, ASTM International, West Conshohocklen, PA, 2011.
50. 50 J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona: Nat. Methods, 2012, vol. 9 (7), pp. 676–82.10.1038/nmeth.2019 ↗
51. 51 C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9 (7), pp. 671-75.10.1038/nmeth.2089 ↗
52. M.D. Atkinson, R. Thomas, A. Harte, P. Crowther, and J. Quinta da Fonseca: DefDAP: Deformation Data Analysis in Python, 2020.
53. 53 F. Gioacchino and J. Quinta da Fonseca: Exp. Mech., 2013, vol. 53 (5), pp. 743–54.10.1007/s11340-012-9685-2 ↗
54. 54 D. Lunt, J.Q. da Fonseca, D. Rugg, and M. Preuss: Mater. Sci. Eng. A, 2017, vol. 680, pp. 444–53.10.1016/j.msea.2016.10.099 ↗
55. ASTM Standard E384: Standard Test Method for Microindentation Hardness of Materials, ASTM International, West Conshohocken, PA, 2017.
56. K. Zhang, J. Mei, N. Wain, and X. Wu: Metall. Mater. Trans. A, 2010, vol. 41 (4), pp. 1033–45.10.1007/s11661-009-0149-y ↗
57. 57 I. Weiss and S.L. Semiatin: Mater. Sci. Eng. A, 1999, vol. 263 (2), pp. 243-56.10.1016/S0921-5093(98)01155-1 ↗
58. 58 X. Xu, D. Lunt, R. Thomas, R.P. Babu, A. Harte, M. Atkinson, J.Q. Fonseca, and M. Preuss: Acta Mater., 2019, vol. 175, pp. 376–93.10.1016/j.actamat.2019.06.024 ↗
59. 59 Y. Mishin and C. Herzig: Acta Mater., 2000, vol. 48 (3), pp. 589–623.10.1016/S1359-6454(99)00400-0 ↗
60. 60 M. Köppers, C. Herzig, M. Friesel, and Y. Mishin: Acta Mater., 1997, vol. 45 (10), pp. 4181–91.10.1016/S1359-6454(97)00078-5 ↗
61. 61 F.K. Mante, G.R. Baran, and B. Lucas: Biomaterials, 1999, vol. 20 (11), pp. 1051–5.10.1016/S0142-9612(98)00257-9 ↗
62. M. Shahedisl, A. Sabahiamini, A. Motallebzadeh, and M. Azadbeh: Mater. Chem. Phys., 2018, vol. 203, pp. 266–73.10.1016/j.matchemphys.2017.09.069 ↗
63. 63 Y. Yulan, W. Weiqi, L. Fengli, L. Weiqing, and Z. Yongqiang: Mater. Sci. Forum, 2009, vol. 618, pp. 169–72.
64. 64 S. Sneddon, D.M. Mulvihill, E. Wielewski, M. Dixon, D. Rugg, and P. Li: Mater. Charact., 2021, vol. 172, p. 110901.10.1016/j.matchar.2021.110901 ↗