Effect of Specimen Thickness on the Degradation of Mechanical Properties of Ferritic-Martensitic P91 Steel by Direct-fired Supercritical CO2 Power Cycle Environment
Source abstract
Abstract
In this study, degradation of the mechanical properties of 9Cr ferritic-martensitic P91 steel by supercritical CO2 (sCO2) power cycle environment was investigated. P91 tensile specimens of 2.54 mm and 0.5 mm thicknesses were exposed to a simulated direct-fired sCO2 power cycle environment at 650 °C for 1000 hours. The exposed specimens were tensile stressed at room temperature and the resulting deformation behaviors were studied. While the thicker P91 had ductile failure with decreased ductility, the failure of the thinner P91 was completely brittle and at a significantly lower tensile stress. These results indicate that the mechanical properties of the thinner P91 were severely degraded by the exposure. Microstructural analyses reveal that the thinner P91 became carbon saturated. This resulted in breakaway oxidation, where fast growing iron-rich oxide layers consumed a significant portion of the specimen thickness. The thicker P91 also carburized during the exposure, however it did not become carbon saturated and growth of iron-rich oxide layers consumed a much smaller portion of the thickness. Hardness tests performed on specimen cross-sections showed increased hardness for both thicknesses. However, the increase was considerable for the thinner P91, where a thick oxide layer and extensive carbide formation in the alloy caused its brittle failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Y. Ahn, S.J. Bae, M. Kim, S.K. Cho, S. Baik, J.I. Lee and J.E. Cha: Nucl Eng Technol., 2015, vol. 47, pp. 647-661.10.1016/j.net.2015.06.009 ↗
2. F. Crespi, G. Gavagnin, G. Sánchez and G.S. Martínez: Appl. Energy., 2017, vol. 195, pp. 152-183.10.1016/j.apenergy.2017.02.048 ↗
3. N. Weiland, R. Dennis, R. Ames, S. Lawson, and P. Strakey: Department of Chemistry, Brown University, Providence, RI (United States), 2017.
4. R.J. Allam, M. Palmer, and G.W. Brown, Jr.: US2011/0179799 A1.
5. B.J.P. Buhre, L.K. Elliott, C.D. Sheng, R.P. Gupta and T.F. Wall: Prog. Energy Combust. Sci., 2005, vol. 31, pp. 283-307.10.1016/j.pecs.2005.07.001 ↗
6. R.J. Allam, M. R. Palmer, G.W. Brown Jr, J. Fetvedt, D. Freed, H. Nomoto, M. Itoh, N. Okita and C. Jones Jr: Energy Procedia, 2013, vol. 37, pp. 1135-1149.10.1016/j.egypro.2013.05.211 ↗
7. R.P. Oleksak and F. Rouillard: in Comprehensive Nuclear Materials, 2nd edn., Elsevier, Oxford.
8. R.P. Oleksak, J.H. Tylczak, G.R. Holcomb and Ö.N. Doğan: Corros. Sci., 2020, vol. 164, pp. 108316.10.1016/j.corsci.2019.108316 ↗
9. R.P. Oleksak, J.H. Tylczak, G.R. Holcomb and Ö.N. Doğan: Corros. Sci., 2019, vol. 157, pp. 20-30.10.1016/j.corsci.2019.05.019 ↗
10. F. Rouillard and T. Furukawa: Corros. Sci., 2016, vol. 105, pp. 120-32.10.1016/j.corsci.2016.01.009 ↗
11. Y. Gong, D.J. Young, P. Kontis, Y.L. Chiu, H. Larsson, A. Shin, J.M. Pearson, M.P. Moody and R.C. Reed: Acta Mater., 2017, vol. 130, pp. 361-374.10.1016/j.actamat.2017.02.034 ↗
12. B.A. Pint, J. Lehmusto, M.J. Lance and J.R. Keiser: Mater. Corros., 2019, vol. 70, pp. 1400-1409.10.1002/maco.201810652 ↗
13. T. Gheno, D. Monceau, J. Zhang and D. J. Young: Corros. Sci., 2011, vol. 53, pp. 2767-2777.10.1016/j.corsci.2011.05.013 ↗
14. G.H. Meier, K. Jung, N. Mu, N.M. Yanar, F.S. Pettit, J.P. Abellán, T. Olszewski, L.N. Hierro, W.J. Quadakkers and G.R. Holcomb: Oxid. Met., 2010, vol. 74, pp. 319-340.10.1007/s11085-010-9215-5 ↗
15. R.P. Oleksak, J.H. Tylczak, C.S. Carney, G.R. Holcomb and Ö.N. Doğan: JOM, 2018, vol. 70, pp. 1527-1534.10.1007/s11837-018-2952-7 ↗
16. B.A. Pint, R.G. Brese, and J.R. Keiser: Mater. Corros., 2017, vol. 68, pp. 151-158.10.1002/maco.201508783 ↗
17. A. Brittan, J. Mahaffey and M. Anderson: Metall. Mater. Trans. A, 2020, vol. 51, pp. 2564-2572.10.1007/s11661-020-05691-7 ↗
18. K.E. Nygren, Z. Fu, F. Rouillard and A. Couet: Corros. Sci., 2020, vol. 163, 108292.10.1016/j.corsci.2019.108292 ↗
19. I.G. Wright, B.A. Pint, J.P. Shingledecker, and D. Thimse: GT2013-94941, Proceedings of ASME Turbo Expo 2013, Turbine Technical Conference and Exposition, June 3–7, 2013, San Antonio, Texas, USA.
20. D. Tabor: Br. J. Appl. Phys., 1956, vol. 7, pp. 159-166.10.1088/0508-3443/7/5/301 ↗
21. Y.V. Milman, A.A. Golubenko and S.N. Dub: Acta Mater., 2011, vol. 5, pp. 7480-7487.10.1016/j.actamat.2011.08.027 ↗
22. J.I. Goldstein and A.E. Moren: Metall. Trans. A, 1978, vol. 9A, pp. 1515-1525.10.1007/BF02661934 ↗
23. G.H. Geiger and D.R. Poirier: Transport Phenomena in Metallurgy, Addison-Wesley Publishing Company, Second Printing, December 1980, pp. 486-487.
24. D.J. Young and J. Zhang: JOM, 2018, vol. 70, pp. 1493-1501.10.1007/s11837-018-2944-7 ↗
25. D. Young, P. Huczkowski, T. Olszewski, T. Huttel, L. Singheiser and W.J. Quadakkers: Corros. Sci., 2014, vol. 88, pp. 161-169.10.1016/j.corsci.2014.07.024 ↗