Processing and Properties of Medium-Mn TRIP Steel to Obtain a Two-Stage TRIP Behavior
Source abstract
Abstract
Two medium-Mn steels of nominal composition 0.15C-2.0Si-10.5Mn-(0.75, 1.5) Al-0.04Nb-balFe (wt pct) were processed to produce sub-micron grain sizes of 0.65 and 0.80 μm. Mechanical testing was performed in three successive conditions: hot rolled, intercritically annealed, and cold rolled with subsequent intercritical annealing. Intercritical annealing was performed at 923 K for 20 hours. Electron-backscattered diffraction and X-ray diffraction were utilized to characterize the microstructure, consisting of α-ferrite, α-martensite, e-martensite, and γ-austenite. Microstructural constituents were tracked during tensile deformation and it was found that both steels exhibited two-stage TRIP with γ-austenite martensitically transforming first to e-martensite and as strain increased e-martensite transformed to α-martensite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. M.C. McGrath, D.C. Van Aken, N.I. Medvedeva, and J.E. Medvedeva, Metall. Mater. Trans. A, Vol. 44A, 2013, pp. 4634-4643.10.1007/s11661-013-1820-x ↗
2. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: International Journal of Plasticity, 2000, vol. 16, pp. 1391-140910.1016/S0749-6419(00)00015-2 ↗
3. D. M. Field, and D.C. Van Aken, Met Trans A., (2016) Vol. 47A pp.1912-191710.1007/s11661-016-3394-x ↗
4. D.M. Field and D.C. Van Aken, Met Trans A., (2018) Vol. 49, pp. 1152-116610.1007/s11661-018-4481-y ↗
5. D.M. Field, J. Qing, and D.C. Van Aken, Met. Trans. A., (2018) Vol 49, pp. 4615-463210.1007/s11661-018-4798-6 ↗
6. B.C. De Cooman, P. Gibbs, S. Lee, and D.K. Matlock, Met Trans A, 2013, vol. 44A, pp. 2563-257210.1007/s11661-013-1638-6 ↗
7. B.C. De Cooman, Y. Estrin, and S.K. Kim, Acta Materialia, 2018, vol. 142. pp. 283-36210.1016/j.actamat.2017.06.046 ↗
8. L. Remy, and A. Pineau Mater. Sci and Eng. 1976, vol. 26 pp. 123-13210.1016/0025-5416(76)90234-2 ↗
9. S. Allain, J.P. Chateau, and O. Bouaziz, Mater Sci and Eng. 2004, vol. 387, pp. 143-14710.1016/j.msea.2004.01.060 ↗
10. T.H. Lee, E. Shin, C.S. Oh, H.Y. Ha, and S.J. Kim, Acta Mater. 2010, vol. 58, 3173-318610.1016/j.actamat.2010.01.056 ↗
11. S-J. Lee, J. Kim, S.N. Kane, and B.C. DeCooman, Acta Mater. 2011, vol. 59, pp. 6809-681910.1016/j.actamat.2011.07.040 ↗
12. Y.N. Dastur and W.C. Leslie, Mater Trans. A, 1981, vol. 12, pp. 749-75910.1007/BF02648339 ↗
13. G.B. Olson, M. Cohen Met Trans A Vol 7 1976 pp. 1897-1904
14. S. T. Pisarik, and D. C. Van Aken, Met Trans A., 2014, vol. 45, pp. 3173-317810.1007/s11661-014-2303-4 ↗
15. D.M. Field, D.S. Baker, and D.C. Van Aken, Met Trans A, 2017, vol. 48, pp. 2150-216310.1007/s11661-017-4020-2 ↗
16. ASTM E 8/E 8M-08, Standard Test Methods for Tension Testing of Metallic Materials
17. S. Martin, C. Ullrich, D. Simek, U. Martin, and D. Rafaja, J. Appl. Crystallogr., 2011, vol. 44, pp. 779-78710.1107/S0021889811019558 ↗
18. ASTM E112-13, Standard Test Methods for Determining Average Grain Size
19. S-J. Lee, J. Kim, S.N. Kane, and B.C. De Cooman, Acta Mater., 2011, vol. 59, pp.6809-681910.1016/j.actamat.2011.07.040 ↗
20. S.K. Huang, Y.H. Wen, N.Li, J.Teng, S.Ding, Y.G. Xu, Mater Characterization vol.59, 2008, pp.681-68710.1016/j.matchar.2007.05.023 ↗
21. S. Shin, M. Kwon, W. Cho, I. S. Suh, and B.C. De Cooman, Mater. Sci. & Eng. 2017, vol. 683, pp. 187-19410.1016/j.msea.2016.10.079 ↗
22. D.Q. Bai, F. Hamad, J. Asante and S. Hansen, Materials Science Forum, 2005, vol 500-501, pp. 481-48810.4028/www.scientific.net/MSF.500-501.481 ↗
23. C.P. Scott, B. Remy, L.-J. Collet, A. Cael, C. Bao, F. Danoix, B. Malard, and C. Curfs, Int. J. Mater. Res. 2011