Modelling the Competitive Growth of Primary, Allotriomorphic, and Secondary Alpha in Ti-6Al-4V
Source abstract
Abstract
Abstract The competitive formation of allotriomorphic α along the prior β grain boundaries, secondary α-phase and the growth of globular primary α is described for the Ti-6Al-4V alloy during continuous cooling. The formation kinetics of the different morphologies of the α-phase is related to the nucleation rate of allotriomorphic α and secondary α as well as with the V supersaturation at the β matrix. A mesoscale physical model is developed for the allotriomorphic α and secondary α based on classical nucleation and growth of platelets. The growth of the primary α is modelled as the growth of a spherical particle embedded in a supersaturated β matrix. Continuous cooling tests at two different holding temperatures in the α+β field, 930 °C and 960 °C, and five different cooling rates, 10, 30, 40, 100 and 300 °C/minutes, are conducted. Additionally, interrupted tests are conducted at different temperatures to determine the progress of growth of primary α and formation of allotriomorphic and secondary α-phases during cooling. The size of primary α increases, while its circularity decreases with decreasing cooling rate. The area fractions of primary α decrease with increasing cooling rate and increasing holding temperature. Moreover, the lower the cooling rate, the thicker the plates of allotriomorphic α and secondary α. The growth of primary α, as well as the formation of allotriomorphic α plates is observed at the beginning of the cooling stage. The formation of secondary α occurs at last and is nearly negligible for very low cooling rates. The model is able to accurately predict the different α-phase formation behaviours and the obtained results show good agreement with the experimental ones.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. G. Lütjering and J. C. Williams: Titanium. Berlin, Heidelberg, Springer Berlin Heidelberg, 2007.
2. R. Pederson: Microstructure and Phase Transformation of Ti-6Al-4V, PhD Dissertation, Lulea University of Technology, Lulea, Sweden, 2002.
3. X. Gao, W. Zeng, S. Zhang, and Q. Wang: Acta Mater., 2017, vol. 122, pp. 298–309.10.1016/j.actamat.2016.10.012 ↗
4. S. L. Semiatin, S. L. Knisley, P. N. Fagin, F. Zhang, and D. R. Barker: Metall. Mater. Trans. A, 2003, vol. 34 A(10), pp. 2377–86.10.1007/s11661-003-0300-0 ↗
5. M. Meng, X. G. Fan, H. Yang, L. G. Guo, M. Zhan, and P. F. Gao: J. Alloys Compd., 2017, vol. 714, pp. 294–302.10.1016/j.jallcom.2017.04.209 ↗
6. Z. Sun, X. Li, H. Wu, and H. Yang: J. Alloys Compd., 2016, vol. 689, pp. 693–701.10.1016/j.jallcom.2016.08.013 ↗
7. N. Kherrouba, M. Bouabdallah, R. Badji, D. Carron, and M. Amir: Mater. Chem. Phys., 2016, vol. 181, pp. 462–469.10.1016/j.matchemphys.2016.06.082 ↗
8. M. Enomoto, H. I. Aaronson, and T. Furuhara: Metall. Trans. A, 1991, vol. 22(6), pp. 1341–48.
9. E. S. K. Menon and H. I. Aaronson: Metall. Mater. Trans. A, 1986, vol. 17(10), pp. 1703–1715.10.1007/BF02817269 ↗
10. C. Atkinson: Metall. Trans. A, 1991, vol. 22(6), pp. 1211–1218.
11. M. Enomoto: Metall. Trans. A, 1991, vol. 22(6), pp. 1235–1245.
12. K. J. Song, Y. H. Wei, Z. B. Dong, X. Y. Wang, W. J. Zheng, and K. Fang: J. Phase Equilibria Diffus., 2015, vol. 36(2), pp. 136–48.10.1007/s11669-015-0369-3 ↗
13. Q. Chen, N. Ma, K. Wu, and Y. Wang: Scr. Mater., 2004, vol. 50(4), pp. 471–476.10.1016/j.scriptamat.2003.10.032 ↗
14. B. Appolaire, L. Héricher, and E. Aeby-Gautier: Acta Mater., 2005, vol. 53(10), pp. 3001–3011.10.1016/j.actamat.2005.03.014 ↗
15. G. W. Mei Yang Tao Liu, Wen-Juan Zhao, Dong-Sheng Xu: Acta Metallurgica Sinica(English letters), 2017, vol. 30(8), pp. 745–52.10.1007/s40195-017-0562-y ↗
16. M. Meng, H. Yang, X. G. Fan, S. L. Yan, A. M. Zhao, and S. Zhu: J. Alloys Compd., 2017, vol. 691, pp. 67–80.10.1016/j.jallcom.2016.08.218 ↗
17. V. Raghavan: Solid State Phase Transformations, PHI Learning Private Limited, Delhi, 1987.
18. I. Katzarov, S. Malinov, and W. Sha: Metall. Mater. Trans. A, 2002, vol. 33(4), pp. 1027–1040.10.1007/s11661-002-0204-4 ↗
19. P. Homporová: Thermal history of alpha morphology in titanium alloy Ti-6Al-4V, PhD Dissertation, Vienna University of Technology, Vienna, 2011.
20. J. Tiley, E. Lee, S. Kar, R. Banerjee, J.C. Russ, and H.L. Fraser: Mater. Sci. Eng., A, 2004, vol. 372(1-2), pp. 191–98.10.1016/j.msea.2003.12.008 ↗
21. GIMP - GNU Image Manipulation Program, https://www.gimp.org/. Accessed: 20-Aug-2019.
22. ImageJ, https://imagej.nih.gov/ij/. Accessed: 20-Aug-2019.
23. U. Zwicker: Titan und Titanlegierungen, Springer, Berlin Heidelberg, 1974.10.1007/978-3-642-80587-5 ↗
24. M. Villa, J.W. Brooks, R.P. Turner, H. Wang, F. Boitout, R.M. Ward: Metall. And Mater. Trans. B, 2019, vol. 50, pp.2898-2911.10.1007/s11663-019-01675-0 ↗
25. R. Shi, Y. Wang: Acta Mater., vol. 61(16), pp. 6006–24.10.1016/j.actamat.2013.06.042 ↗
26. M. Enomoto, H.I. Aaronson: Metall. Trans. A, 1986, vol. 17(8), pp. 1385-1397.
27. E. Sarath Kumar Menon, H.I. Aaronson: Metall. Mater. Trans. A, 1986, vol. 17(10), pp. 1703–15.10.1007/BF02817269 ↗
28. D. S. Wilkinson: Mass Transport in Solids and Fluids. Cambridge University Press, Cambridge, 2000.10.1017/CBO9781139171267 ↗
29. J. W. Christian: The theory of transformations in metals and alloys : an advanced textbook in physical metallurgy. Pergamon Press, Oxford, 1975.
30. A. Deschamps and Y. Brechet: Acta Mater., 1998, vol. 47(1), pp. 293–305.10.1016/S1359-6454(98)00296-1 ↗
31. W. Rae: Mater. Sci. Technol., 2019, vol. 35(7), pp. 747-766.10.1080/02670836.2019.1591031 ↗
32. J. Sieniawski, W. Ziaja, K. Kubiak, M. Motyka: in Titanium alloys-advances in properties control. IntechOpen, 2013.10.5772/49999 ↗