A Comprehensive Study on Texture Development and Twin-Related Domain Evolution Following Hot Compression in a Super Austenitic Stainless Steel
Source abstract
Abstract
Uniaxial hot deformation was carried out in a wide range of temperatures (1173 K to 1423 K) and strain rates (0.001 to 10 s−1) in a super austenitic stainless steel employing a Gleeble thermomechanical simulator. The evolution of fine grains due to dynamic recrystallization (DRX) with near-random texture was evident following deformation at strain rates 0.001 to 10 s−1 and temperatures 1173 K to 1273 K. The deformed grains in this domain exhibited the typical formation of 〈110〉//ND or α fiber, and its volume fraction gradually increased when the resistance to deformation increases. Weak deformation texture was persisted in the fine DRX grains (≤ 3 µm) which gradually converted to a strong 〈001〉//ND fiber following grain growth. The deformation texture was simulated by employing a crystal plasticity finite element method (CPFEM). The texture inhomogeneity was observed in the typical compressed specimen which was associated with variation in stress/strain paths at different locations of the hot compressed specimen. Further, the ∑3 twin boundary evolution was analyzed employing Pande’s relationship and twin-related domains (TRDs) analysis. The growth accident was identified as the major mechanism of ∑3 twin boundary evolution during DRX in this alloy. Moreover, the ∑3 regeneration was also evident in a small domain of hot working (1323 K/0.001 s−1) which was substantiated by texture randomization and formation of relatively larger TRDs in the microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. A. Mirzaei, A. Zarei-Hanzaki, H.R. Abedi, Metall. Mater. Trans. A 47A, 2037–2048 (2016)10.1007/s11661-016-3364-3 ↗
2. K. Arun Babu, S. Mandal, C.N. Athreya, B. Shakthipriya, V.S. Sarma, Mater. Des. 115, 262–275 (2017)10.1016/j.matdes.2016.11.054 ↗
3. N. Rajendran, S. Rajeswari, J. Mater. Sci. 31, 6615–6619 (1996)10.1007/BF00356269 ↗
4. J. Moon, T.-H. Lee, C.-H. Lee, S.-J. Park, J.-H. Shin, J.-W. Lee, Metall. Mater. Trans. A 50A, 5670–5677 (2019)10.1007/s11661-019-05487-4 ↗
5. C. Gupta, J.S. Jha, B. Jayabalan, R. Gujrati, A. Alankar, S. Mishra, Metall. Mater. Trans. A 50A, 4714–4731 (2019)10.1007/s11661-019-05380-0 ↗
6. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, A.D. Rollett, Mater. Sci. Eng. A 238, 219–274 (1997)10.1016/S0921-5093(97)00424-3 ↗
7. D.-X. Wen, Y.C. Lin, X.-H. Li, S.K. Singh, J. Alloys Compd. 764, 1008–1020 (2018)10.1016/j.jallcom.2018.06.146 ↗
8. Y.C. Lin, J. Huang, D.-G. He, X.-Y. Zhang, Q. Wu, L.-H. Wang, C. Chen, K.-C. Zhou, J. Alloys Compd. 795, 471–482 (2019)10.1016/j.jallcom.2019.04.319 ↗
9. K. Arun Babu, S. Mandal, Mater. Sci. Eng. A 703, 187–195 (2017)10.1016/j.msea.2017.07.035 ↗
10. N.S. Shah, S. Sunil, A. Sarkar, Metall. Mater. Trans. A 49A, 2644–2653 (2018)10.1007/s11661-018-4641-0 ↗
11. S. Roy, S. Biswas, K. Arun Babu, S. Mandal, J. Mater. Eng. Perform. 27, 3762–3772 (2018)10.1007/s11665-018-3416-5 ↗
12. S. Mandal, M. Jayalakshmi, A.K. Bhaduri, V.S. Sarma, Metall. Mater. Trans. A 45A, 5645–5656 (2014)10.1007/s11661-014-2480-1 ↗
13. D. Samantaray, S. Mandal, M. Jayalakshmi, C.N. Athreya, A.K. Bhaduri, V.S. Sarma, Mater. Sci. Eng. A 598, 368–375 (2014)10.1016/j.msea.2013.12.105 ↗
14. N. Haghdadi, P. Cizek, H. Beladi, P.D. Hodgson, Acta Mater. 126, 44–57 (2017)10.1016/j.actamat.2016.12.045 ↗
15. S. Mandal, A.K. Bhaduri, V.S. Sarma, Metall. Mater. Trans. A 43A, 410–414 (2012)10.1007/s11661-011-1015-2 ↗
16. A. Dehghan-Manshadi, P.D. Hodgson, Metall. Mater. Trans. A 39A, 2830–2840 (2008)10.1007/s11661-008-9656-5 ↗
17. A. Chatterjee, A. Dutta, S.M. Basiruddin, R. Mitra, A.K. Bhaduri, D. Chakrabarti, Metall. Mater. Trans. A 48A, 2410–2424 (2017)10.1007/s11661-017-4039-4 ↗
18. K. Arun Babu, Y.H. Mozumder, R. Saha, V.S. Sarma, S. Mandal, Mater. Sci. Eng. A 734, 269–280 (2018)10.1016/j.msea.2018.07.104 ↗
19. Y.H. Mozumder, K. Arun Babu, R. Saha, S. Mandal, Mater. Charact. 146, 1–14 (2018)10.1016/j.matchar.2018.09.036 ↗
20. S. Mandal, A.K. Bhaduri, V.S. Sarma, Metall. Mater. Trans. A 43A, 2056–2068 (2012)10.1007/s11661-011-1012-5 ↗
21. V. Randle, Mater. Sci. Technol. 26, 253–261 (2010)10.1179/026708309X12601952777747 ↗
22. D. An, T.A. Griffiths, P. Konijnenberg, S. Mandal, Z. Wang, S. Zaefferer, Acta Mater. 1, 297–307 (2018)10.1016/j.actamat.2018.06.044 ↗
23. E. Brünger, X. Wang, G. Gottstein, Scr. Mater. 38, 1843–1849 (1998)10.1016/S1359-6462(98)00124-9 ↗
24. H. Miura, T. Sakai, R. Mogawa, G. Gottstein, Scr. Mater. 51, 671–675 (2004)10.1016/j.scriptamat.2004.06.015 ↗
25. M. Detrois, R.L. Goetz, R.C. Helmink, S. Tin, Mater. Sci. Eng. A 647, 157–162 (2015)10.1016/j.msea.2015.09.022 ↗
26. H. Gleiter, Acta Metall. 17, 1421–1428 (1969)10.1016/0001-6160(69)90004-2 ↗
27. S.K. Pradhan, S. Mandal, C.N. Athreya, K. Arun Babu, B. de Boer, V.S. Sarma, Mater. Sci. Eng. A 700, 49–58 (2017)10.1016/j.msea.2017.05.109 ↗
28. C.S. Pande, M.A. Imam, B.B. Rath, Metall. Trans. A 21A, 2891–2896 (1990)10.1007/BF02647209 ↗
29. B.R. Chen, A.C. Yeh, J.W. Yeh, Sci. Rep. 6, 1–9 (2016)10.1038/s41598-016-0001-8 ↗
30. S. Irukuvarghula, H. Hassanin, C. Cayron, M.M. Attallah, D. Stewart, M. Preuss, Acta Mater. 133, 269–281 (2017)10.1016/j.actamat.2017.04.068 ↗
31. J. Lind, S.F. Li, M. Kumar, Acta Mater. 114, 43–53 (2016)10.1016/j.actamat.2016.03.002 ↗
32. T.S. Prithiv, P. Bhuyan, S.K. Pradhan, V.S. Sarma, S. Mandal, Acta Mater. 146, 187–201 (2018)10.1016/j.actamat.2017.12.045 ↗
33. T. Watanabe, S. Tsurekawa, Acta Mater. 47, 4171–4185 (1999)10.1016/S1359-6454(99)00275-X ↗
34. S.K. Pradhan, P. Bhuyan, C. Kaithwas, S. Mandal, Metall. Mater. Trans. A 49A, 2817–2831 (2018)10.1007/s11661-018-4608-1 ↗
35. C.K. Kaithwas, P. Bhuyan, S.K. Pradhan, S. Mandal, Mater. Charact. 145, 582–593 (2018)10.1016/j.matchar.2018.09.019 ↗
36. H. Beladi, P. Cizek, P.D. Hodgson, Metall. Mater. Trans. A 40A, 1175–1189 (2009)10.1007/s11661-009-9799-z ↗
37. N. Eftekhari, A. Zarei-Hanzaki, A. Shamsolhodaei, A.-L. Helbert, T. Baudin, Adv. Eng. Mater. 20, 1438–1456 (2018)10.1002/adem.201700928 ↗
38. M. Rout, S. Biswas, R. Ranjan, S.K. Pal, S.B. Singh, Metall. Mater. Trans. A 49A, 864–880 (2017)
39. D. Raabe, Acta Mater. 45, 1137–1151 (1997)10.1016/S1359-6454(96)00222-4 ↗
40. S. Li, Q. Zhao, Z. Liu, F. Li, J. Mater. Eng. Perform. 27, 3350–3373 (2018)10.1007/s11665-018-3439-y ↗
41. N.P. Gurao, R. Kapoor, S. Suwas, Metall. Mater. Trans. A 41A, 2794–2804 (2010)10.1007/s11661-010-0360-x ↗
42. A. Dehghan-Manshadi, M.R. Barnett, P.D. Hodgson, Metall. Mater. Trans. A 39A, 1359–1370 (2008)10.1007/s11661-008-9512-7 ↗
43. G.B. Sarma, P.R. Dawson, Acta Mater. 44, 1937–1953 (1996)10.1016/1359-6454(95)00309-6 ↗
44. S.R. Kalidindi, C.A. Bronkhorst, L. Anand, J. Mech. Phys. Solids 40, 537–569 (1992)10.1016/0022-5096(92)80003-9 ↗
45. A.J. Beaudoin, P.R. Dawson, K.K. Mathur, U.F. Kocks, Int. J. Plasticity 11, 501–521 (1995)10.1016/S0749-6419(99)80003-5 ↗
46. P. Van Houtte, S. Li, M. Seefeldt, L. Delannay, Int. J. Plasticity 21, 589–624 (2005)10.1016/j.ijplas.2004.04.011 ↗
47. V.M. Miller, S.L. Semiatin, C. Szczepanski, A.L. Pilchak, Metall. Mater. Trans. A 49A, 3624–3636 (2018)10.1007/s11661-018-4716-y ↗
48. N.P. Gurao, P. Kumar, A. Sarkar, H.-G. Brokmeier, S. Suwas, J. Mater. Eng. Perform. 22, 1004–1009 (2013)10.1007/s11665-012-0388-8 ↗
49. E.B. Marin, On the Formulation of a Crystal Plasticity Model (Sandia National Laboratories, Livermore, 2006)10.2172/890604 ↗
50. B. Bacroix, J.J. Jonas, Textures Microstruct. 8–9, 267–311 (1988)10.1155/TSM.8-9.267 ↗
51. D. Raabe, D. Ma, F. Roters, Acta Mater. 55, 4567–4583 (2007)10.1016/j.actamat.2007.04.023 ↗
52. M. Liu, C. Lu, A.K. Tieu, Int. J. Solids Struct. 54, 42–49 (2015)10.1016/j.ijsolstr.2014.11.008 ↗
53. D. Raabe, Z. Zhao, F. Roters, Scr. Mater. 50, 1085–1090 (2004)10.1016/j.scriptamat.2003.11.061 ↗
54. D. Samantaray, S. Mandal, A.K. Bhaduri, Mater. Des. 32, 2797–2802 (2011)10.1016/j.matdes.2011.01.007 ↗
55. Y. Jin, M. Bernacki, G.S. Rohrer, A.D. Rollett, B. Lin, N. Bozzolo, Mater. Sci. Forum 753, 113–116 (2013)10.4028/www.scientific.net/MSF.753.113 ↗
56. C. Cayron, J. Appl. Crystallogr. 40, 1183–1188 (2007)10.1107/S0021889807048777 ↗
57. T. Leffers, R.K. Ray, Prog. Mater. Sci. 54, 351–396 (2009)10.1016/j.pmatsci.2008.09.002 ↗
58. P. Acar, A. Ramazani, V. Sundararaghavan, Metals (Basel) 7, 459–472 (2017)10.3390/met7110459 ↗
59. M. Detrois, R.L. Goetz, R.C. Helmink, S. Tin, J. Mater. Sci. 51, 5122–5138 (2016)10.1007/s10853-016-9815-9 ↗
60. C. Zener, J.H. Hollomon, J. Appl. Phys. 15, 22–32 (1944)10.1063/1.1707363 ↗
61. S. Mahajan, C.S. Pande, M.A. Imam, B.B. Rath, Acta Mater. 45, 2633–2638 (1997)10.1016/S1359-6454(96)00336-9 ↗
62. C. Cayron, Acta Crystallogr. A. 63, 11–29 (2007)10.1107/S0108767306044291 ↗
63. T. Liu, S. Xia, H. Li, B. Zhou, Q. Bai, C. Su, Z. Cai, J. Mater. Res. 28, 1165–1176 (2013)10.1557/jmr.2013.37 ↗
64. P.P. Bhattacharjee, R.K. Ray, N. Tsuji, Metall. Mater. Trans. A 41A, 2856–2870 (2010)10.1007/s11661-010-0345-9 ↗
65. C. Maurice, J.H. Driver, Acta Mater. 45, 4627–4638 (1997)10.1016/S1359-6454(97)00115-8 ↗
66. H. Hu, R.S. Cline, Textures Microstruct. 8–9, 191–206 (1988)10.1155/TSM.8-9.191 ↗
67. S.G. Chowdhury, S. Das, P.K. De, Acta Mater. 53, 3951–3959 (2005)10.1016/j.actamat.2005.05.006 ↗
68. R. Sonkusare, R. Jain, K. Biswas, V. Parameswaran, N.P. Gurao, J. Alloys Compd. 823, 153763 (2020)10.1016/j.jallcom.2020.153763 ↗
69. L.S. Tóth: A. Haldar, S. Suwas, and D. Bhattacharjee, eds., Microstructure and Texture in Steels, Springer London, London, 2009, pp. 225–46.
70. N.P. Gurao, S. Sethuraman, S. Suwas, Mater. Sci. Eng. A 528, 7739–7750 (2011)10.1016/j.msea.2011.06.062 ↗
71. G.R. Canova, C. Fressengeas, A. Molinari, U.F. Kocks, Acta Metall. 36, 1961–1970 (1988)10.1016/0001-6160(88)90298-2 ↗
72. S.K. Paul, G. Manikandan, R.K. Verma, J. Strain Anal. Eng. Des. 48, 386–394 (2013)10.1177/0309324713488886 ↗
73. L.S. Tóth, J.J. Jonas, D. Daniel, J.A. Bailey, Textures Microstruct. 19, 245–262 (1992)10.1155/TSM.19.245 ↗
74. S. Wroński, K. Wierzbanowski, B. Bacroix, T. Chauveau, M. Wróbel, A. Rauch, F. Montheillet, M. Wroński, Arch. Metall. Mater. 54, 89–102 (2009)
75. S. Suwas, A.K. Singh, Mater. Sci. Eng. A 356, 368–371 (2003)10.1016/S0921-5093(03)00149-7 ↗
76. D. Horton, C.B. Thomson, V. Randle, Mater. Sci. Eng. A 203, 408–414 (1995)10.1016/0921-5093(95)09821-6 ↗
77. O. Engler, H.E. Vatne, E. Nes, Mater. Sci. Eng. A 205, 187–198 (1996)10.1016/0921-5093(95)09879-8 ↗
78. P. Dolzhenko, M. Tikhonova, R. Kaibyshev, A. Belyakov, Metals (Basel) 9, 30–42 (2019)10.3390/met9010030 ↗
79. W.B. Hutchinson, Int. Met. Rev. 29, 25–42 (1984)10.1179/imtr.1984.29.1.25 ↗
80. G. Gottstein, Acta Metall. 32, 1117–1138 (1984)10.1016/0001-6160(84)90015-4 ↗
81. V.Y. Gertsman, R.Z. Valiev, V.N. Danilenko, and O.V. Mishin: Le J. Phys. Colloq., 1990, vol. 51, pp. C1–151–54.10.1051/jphyscol:1990122 ↗