Low-Temperature Nitridation of 2205 Duplex Stainless Steel
Source abstract
Abstract
Low-temperature gas-phase nitridation has been studied in $$\updelta $$-ferrite in 2205 duplex stainless steel. High-resolution spatially-resolved compositional and structural analysis revealed two competitive responses to nitridation. Some regions revealed a nitrogen atom fraction approaching 25 at. pct—greater than $$10^6$$ times the equilibrium solubility limit at room temperature. Remarkably, there is no expansion or distortion of the body-centered cubic lattice. This is similar to the response of $$\updelta $$-ferrite in this alloy to low-temperature carburization. In conventional transmission electron microscopy bright-field images, the supersaturated ferrite grains show no diffraction contrast—resembling the appearance of amorphous structures—suggesting an unusually high defect density. These grains exhibit spinodal decomposition of the ferrite to nanometer-scale Fe-rich and Cr-rich ferrite domains. High-resolution imaging reveals pristine Fe-rich nanocrystals, whereas the Cr-rich domains are apparently amorphous. Elsewhere in the nitrogen-rich case, an isothermal ferrite-to-austenite phase transformation occurred. The austenite transformation product formed martensitically with a high-aspect-ratio plate-like morphology in the Nishiyama–Wassermann orientation relationship to the ferrite matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Hydrogen Storage and Materials · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. H. Dong: Int. Mater. Rev. 2010, vol. 55, pp. 65–98.10.1179/095066009X12572530170589 ↗
2. T. Bell: Key Eng. Mater. 2008, vol. 373–374, pp. 289–295.10.4028/www.scientific.net/KEM.373-374.289 ↗
3. J. Buhagiar: Surf. Eng. 2010, vol. 26, pp. 229–232.10.1179/026708410X12687356948751 ↗
4. M.A.J. Somers and T.L. Christiansen: in ASM Handbook, vol. 4D, J.L. Dossett and G.E. Totten eds., ASM International, Cleveland, 2014, pp. 439–50.
5. S.R. Collins, P.C. Williams, S.V. Marx, A.H. Heuer, F. Ernst, and H. Kahn: in ASM Handbook, J.L. Dossett and G.E. Totten eds., ASM International, Cleveland, 2014, pp. 451–60.10.31399/asm.hb.v04d.a0005939 ↗
6. A. H. Heuer, H. Kahn, F. Ernst, G. M. Michal, D. B. Hovis, R. J. Rayne, F. J. Martin, P. M. Natishan: Acta Mater. 2012, vol. 60 (2), pp. 716–725.10.1016/j.actamat.2011.10.004 ↗
7. A. H. Heuer, H. Kahn, P. M. Natishan, F. J. Martin, L. E. Cross: Electrochim. Acta 2011, vol. 58, pp. 157–160.10.1016/j.electacta.2011.09.027 ↗
8. D. Wu: Ph.D. thesis, Case Western Reserve University, Cleveland, OH, 2013.
9. G. M. Michal, F. Ernst, H. Kahn, Y. Cao, F. Oba, N. Agarwal, A. H. Heuer: Acta Mater. 2006, vol. 54 (6), pp. 1597–1606.10.1016/j.actamat.2005.11.029 ↗
10. G. M. Michal, F. Ernst, A. H. Heuer: Metall. Mater. Trans. A 2006, vol. 37 (6), pp. 1819–1824.10.1007/s11661-006-0124-9 ↗
11. D. Wang, C. W. Chen, J. C. Dalton, F. Yang, R. Sharghi-Moshtaghin, H. Kahn, F. Ernst, R. E. A. Williams, D. W. McComb, A. H. Heuer: Acta Mater. 2015, vol. 86, pp. 193–207.10.1016/j.actamat.2014.12.013 ↗
12. W. R. de Oliveira, B. C. Kurelo, D. G. Ditzel, F. C. Serbena, C. E. Foerster, G. B. de Souza: Appl. Surf. Sci. 2018, vol. 434, pp. 1161–1174.10.1016/j.apsusc.2017.11.021 ↗
13. L. Paijan, M. Berhan, M. Adenan, N. Yusof, and E. Haruman: in Advanced Materials Research, vol. 576, Trans Tech Publications, Zurich, 2012, pp. 260–63.10.4028/www.scientific.net/AMR.576.260 ↗
14. A. M. Gatey, S. S. Hosmani, S. B. Arya, C. A. Figueroa, R. P. Singh: Surf. Eng. 2016, vol. 32 (1), pp. 61–68.10.1080/02670844.2015.1112937 ↗
15. J. Yan, T. Gu, S. Qiu, J. Wang, J. Xiong, H. Fan: Metall. Mater. Trans. B 2015, vol. 46 (3), pp. 1461–1470.10.1007/s11663-015-0298-x ↗
16. J. Yan, J. Wang, Y. Lin, T. Gu, D. Zeng, R. Huang, X. Ji, H. Fan: J. Mater. Eng. Perform. 2014, vol. 23 (4), pp. 1157–1164.10.1007/s11665-014-0922-y ↗
17. R. Huang, J. Wang, S. Zhong, M. Li, J. Xiong, H. Fan: App. Surf. Sci. 2013, vol. 271, pp. 93–97.10.1016/j.apsusc.2013.01.111 ↗
18. J. Bielawski, J. Baranowska: Surf. Eng. 2010, vol. 26, pp. 299–304.10.1179/026708410X12593178265904 ↗
19. C. Blawert, B. L. Mordike, Y. Jirásková, O. Schneeweiss: Surf. Coat. Technol. 1999, vol. 116-119, pp. 189–198.10.1016/S0257-8972(99)00086-9 ↗
20. C. Blawert, A. Weisheit, B. L. Mordike, F. M. Knoop: Surf. Coat. Technol. 1996, vol. 85, pp. 15–27.10.1016/0257-8972(96)02880-0 ↗
21. B. Larisch, U. Brusky, H. J. Spies: Surf. Coat. Technol. 1999, vol. 116-119, pp. 205–211.10.1016/S0257-8972(99)00084-5 ↗
22. H. J. Spies, C. Eckstein, H. Biermann, A. Franke: Materialwiss. Werkstofftech. 2010, vol. 41, pp. 133–141.10.1002/mawe.201000563 ↗
23. A. M. Kliauga, P. Schwaab, M. Pohl: Z. Werkstoffe 1999, vol. 54, pp. 65–71.
24. A. M. Kliauga, M. Pohl: Surf. Coat. Technol. 1998, vol. 98, pp. 1205–1210.10.1016/S0257-8972(97)00240-5 ↗
25. A.M. Kliauga: Ph.D. thesis, Ruhr-Universität Bochum, Fakultät für Maschinenbau, Bochum, Germany, 1997.
26. T. L. Christiansen, M. A. J. Somers: Surf. Eng. 2005, vol. 21, pp. 445–455.10.1179/174329405X68597 ↗
27. M. Pohl, A.M. Kliauga, and W. Reick: in Surface Engineering, Taylor & Francis, New Yok, 1993, pp. 193–98.
28. C. E. Pinedo, A. P. Tschiptschin: Rem: Rev. Esc. Minas 2013, vol. 66 (2), pp. 209–214.
29. R. H. van der Jagt: Heat Treat. Met. 2000, vol. 3, pp. 62–65.
30. G. M. Michal, X. Gu, W. D. Jennings, H. Kahn, F. Ernst, A. H. Heuer: Metall. Mater. Trans. A 2009, vol. 40A, pp. 1781–1790.10.1007/s11661-009-9826-0 ↗
31. H. Kahn, A. H. Heuer, G. M. Michal, F. Ernst, R. Sharghi-Moshtaghin, Y. Ge, P. M. Natishan, R. J. Rayne, F. J. Martin: Surf. Eng. 2012, vol. 28 (3), pp. 213–219.10.1179/1743294411Y.0000000015 ↗
32. D. Wang, H. Kahn, F. Ernst, A. Heuer: Acta Mater. 2017, vol. 124, pp. 237–246.10.1016/j.actamat.2016.11.004 ↗
33. A. Zangiabadi, J. C. Dalton, D. Wang, F. Ernst, A. H. Heuer: Metall. Mater. Trans. A 2017, vol. 48 (1), pp. 8–13.10.1007/s11661-016-3853-4 ↗
34. J. C. Dalton: Ph.D. thesis, Case Western Reserve University, Cleveland, OH, 2017.
35. R. R. Keller, R. H. Geiss: J. Microsc. 2012, vol. 245 (3), pp. 245–251.10.1111/j.1365-2818.2011.03566.x ↗
36. P. W. Trimby: Ultramicroscopy 2012, vol. 120, pp. 16–24.10.1016/j.ultramic.2012.06.004 ↗
37. T. De Nys, P. M. Gielen: Metall. Trans. 1971, vol. 2 (5), pp. 1423–1428.10.1007/BF02913370 ↗
38. D. Wang: Ph.D. thesis, Case Western Reserve University, Cleveland, OH 2014.
39. R. Amini, E. Salahinejad, E. A. Bajestani, M. Hadianfard: J. Alloys Compd. 509(7), pp. 3252–3256 2011.10.1016/j.jallcom.2010.12.097 ↗
40. M. Enayati, M. Bafandeh: J. Alloys Compd. 454(1-2), pp. 228–232 (2008).10.1016/j.jallcom.2007.03.064 ↗
41. J. Loureiro, B. Costa, G. Le Caër, and P. Delcroix: in ICAME 2007, Springer, Berlin, 2008, pp. 281–87.10.1007/978-3-540-78697-9_33 ↗
42. M. Mendez, H. Mancha, G. Mendoza, J. Escalante, M. Cisneros, H. Lopez: Metall. Mater. Trans. A 2002, vol. 33 (10), pp. 3273–3278.10.1007/s11661-002-0313-0 ↗
43. H. Miura, K. Omuro, H. Ogawa: Mater. Trans., JIM 1995, vol. 36 (2), pp. 263–268.10.2320/matertrans1989.36.263 ↗
44. H. Miura, K. Omuro, H. Ogawa: ISIJ Int. 1996, vol. 36 (7), pp. 951–957.10.2355/isijinternational.36.951 ↗
45. Y. Ogino, K. Namba, T. Yamasaki: ISIJ Int. 1993, vol. 33 (3), pp. 420–425.10.2355/isijinternational.33.420 ↗
46. E. Salahinejad, R. Amini, M. Marasi, T. Sritharan, M. Hadianfard: Mater. Chem. Phys. 2009, vol. 118 (1), pp. 71–75.10.1016/j.matchemphys.2009.07.005 ↗
47. E. Salahinejad, R. Amini, M. Ghaffari, M. Hadianfard: J. Alloys Compd., 505(2), pp. 584–587 2010.10.1016/j.jallcom.2010.06.079 ↗
48. A. Zangiabadi: Ph.D. thesis, Case Western Reserve University, Cleveland, OH 2017.
49. Z. Nishiyama: Sci. Rep. Tohoku Univ. 1934, vol. 23, pp. 637.
50. G. Wassermann: Ueber den Mechanismus der $$\alpha $$–$$\gamma $$–Umwandlung des Eisens, Verlag Stahleisen, 1935.
51. P. D. Southwick, R. Honeycombe: Met. Sci. 1980, vol. 14, pp. 253–261.10.1179/030634580790426418 ↗
52. Y. S. Li, S. X. Li, T. Y. Zhang: J. Nucl. Mater. 2009, vol. 395 (1), pp. 120–130.10.1016/j.jnucmat.2009.10.042 ↗