journal article·2019-09-15

Microstructural Evolution and Oxidation Behavior of Alloy Ni-13Mo-13Cr-9W-3Fe-3Ti-2Al During Isothermal Exposure at 900 °C

He Jiang, Jianxin Dong, Maicang Zhang, Weimin Guo

Publisher page

Abstract

The microstructure evolution and oxidation behavior of alloy Ni-13Mo-13Cr-9W-3Fe-3Ti-2Al (alloy K4208), a newly developed Ni-Cr-W-Mo-based wear-resistant superalloy, were investigated by isothermal aging at 900 °C in air. Thermodynamic calculations, microstructure observations, electron probe microanalysis (EPMA), and precise microchemical analysis were used to study the microstructure evolution and oxidation mechanism of alloy K4208. The results showed that alloy K4208 was mainly composed of a P-like phase, M6C (and M12C) carbide, γ′ phase, μ phase, and γ matrix. During the 900 °C aging, the γ′ phase coarsened into irregular shapes, the M6C (and M12C) carbide decomposed, and the μ phase dissolved into the matrix, providing abundant Cr, Mo, and W for the growth of the P-like phase. Hence, the relationship between the different phases was established by element redistribution. In addition, the oxidation of alloy K4208 was a diffusion-controlled process, leading to the formation of a stable oxide layer composed of three parts: a thin layer of NiCr2O4 spinel located on the outermost side, a continuous Cr2O3 layer decorated with TiO2 in the middle, and an internal Al2O3 layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. CMS Academic committee of the superalloys: China superalloys handbook. (China Standards Press, Beijing, 2012).
2. D.W. Yun, SM Seo, HW Jeong, IS Kim and YS Yoo, J. Alloys Compd. 2014, vol. 587, pp. 105-112.10.1016/j.jallcom.2013.10.138 ↗
3. D.W. Yun, S.M. Seo, H.W. Jeong and Y.S. Yoo, J. Alloys Compd. 2017, vol. 710, pp. 8-19.10.1016/j.jallcom.2017.03.179 ↗
4. Yubi Zhang, Xiaoyang Hu, Changrong Li, Weiwei Xu and Yongtao Zhao, Mater. Des. 2017, vol. 129, pp. 26-33.10.1016/j.matdes.2017.05.028 ↗
5. A Kewther, MSJ Hashmi and BS Yilbas, J. Mater. Eng. Perform. 2001, vol. 10, pp. 108-113.10.1361/105994901770345420 ↗
6. Kh A Al-Hatab, MA Al-Bukhaiti, U Krupp and M Kantehm, Oxid. Met. 2011, vol. 75, pp. 209-228.10.1007/s11085-010-9230-6 ↗
7. M.S. Pampana: in The Department of Mechanical Engineering, Louisiana State University, Louisiana, 2004.
8. J. Liu, J. Li, F.S. Hage, P. Ghosh, J. Li, W. Wang, Z. Chen, T. Wang, W. Tang and Q. Ramasse, Acta Mater. 2017, vol. 131, pp. 169-86.10.1016/j.actamat.2017.04.006 ↗
9. W. Guo, M. Zhao, J. Wu, J. Zhao, and Z. Chen: in: 11th Chinese Superalloy Conference, 2007, pp. 368–71.
10. Jiangdong Cao, Junsong Zhang, Ruifang Chen, Yunxia Ye and Yinqun Hua, Mater. Charact. 2016, vol. 118, pp. 122-128.10.1016/j.matchar.2016.05.013 ↗
11. XH Wang and YC Zhou, Oxid. Met. 2003, vol. 59, pp. 303-320.10.1023/A:1023092027697 ↗
12. Yinqun Hua, Zhen Rong, Yunxia Ye, Kangmin Chen, Ruifang Chen, Qing Xue and Haixia Liu, Appl. Surf. Sci. 2015, vol. 330, pp. 439-444.10.1016/j.apsusc.2015.01.033 ↗
13. Tae-Hyeong Kim, Dong-Hyoung Lee, Donghoon Kim, Changheui Jang and Jong-Il Yun, J. Anal. At. Spectrom. 2012, vol. 27, pp. 1525-1531.10.1039/c2ja30138e ↗
14. JH Chen, PM Rogers and JA Little, Oxid. Met. 1997, vol. 47, pp. 381-410.10.1007/BF02134783 ↗
15. F.A. Pérez-González, N.F. Garza-Montes-de Oca, and R. Colás: Oxid. Met., 2014, vol. 82, pp. 145–61.10.1007/s11085-014-9483-6 ↗
16. The Physicochemical Phase Analysis in Steel, Iron and Nickel-Base Alloy, Shanghai University of Science and Technology Press, Shanghai, 1981.
17. M. M. Chiavaras, J. A. Jacobson, R. Carlos, E. Maida, T. Bentley, N. Simunovic, M. Swinton and M. Bhandari, Mater. Sci. Eng. A 2008, vol. 485, pp. 74-79.10.1016/j.msea.2007.07.055 ↗
18. B. Djerdjare, S. Lebaili and S. Lay, Mater. Sci. Eng. A 2008, vol. 475, pp. 336-42.10.1016/j.msea.2007.05.092 ↗
19. SH Zangeneh and H Farhangi, Mater. Des. 2010, vol. 31, pp. 3504-3511.10.1016/j.matdes.2010.02.021 ↗
20. C.M.F. Rae, M.S.A. Karunaratne, C.J. Small, R.W. Broomfield, C.N. Jones, and R.C. Reed: in Superalloys 2000: Proceedings of the Ninth International Symposium on Superalloys, ed. T.M. Pollock, TMS, Pennsylvania, 2000, pp. 767–76.
21. Wen Sun, Xuezhi Qin, Jianting Guo, Langhong Lou and Lanzhang Zhou, Acta Metall. Sin. 2015, vol. 51, pp. 67-76.
22. R Krishna, SV Hainsworth, SPA Gill, A Strang and HV Atkinson, Metall. Mater. Trans. A 2013, vol. 44, pp. 1419-1429.10.1007/s11661-012-1491-z ↗
23. XZ Qin, JT Guo, C Yuan, GX Yang, LZ Zhou and HQ Ye, J. Mater. Sci. 2009, vol. 44, pp. 4840-4847.10.1007/s10853-009-3738-7 ↗
24. Catherine MF Rae and Roger C Reed, Acta Mater. 2001, vol. 49, pp. 4113-4125.10.1016/S1359-6454(01)00265-8 ↗
25. Yunrong Zheng, Acta Metall. Sin. 1999, vol. 35, pp. 1242-1245.
26. JX Yang, Q Zheng, XF Sun, HR Guan and ZQ Hu, Scripta Mater. 2006, vol. 55, pp. 331-334.10.1016/j.scriptamat.2006.04.032 ↗
27. HM Tawancy, J. Mater. Sci. 1996, vol. 31, pp. 3929-3936.10.1007/BF00352653 ↗
28. Jinsheng Lu: Common phases identification manuals for steel and alloys by X-ray. (Central Iron& Steel Research Institute, Beijing, 1990).
29. Fenfen Han, Li Jiang, Xiangxi Ye, Yanling Lu, Zhijun Li and Xingtai Zhou, Materials 2017, vol. 10, p. 521.10.3390/ma10050521 ↗
30. T. Liu, JS Dong, L. Wang, Z.J. Li, X.T. Zhou, LH Lou and J Zhang, J. Mater. Sci. Technol. 2015, vol. 31, pp. 269-79.10.1016/j.jmst.2014.07.021 ↗
31. Pierre Villars and LD Calvert, American Society of Metals, Cleveland, OH 1985.
32. Jiajie Huo, Qianying Shi, Yunrong Zheng and Qiang Feng, Mater. Charact. 2017, vol. 124, pp. 73-82.10.1016/j.matchar.2016.12.003 ↗
33. Kexin Guo, Acta Metall. Sin. 1978, vol. 14, pp. 73-95.
34. RB Leonard, Corrosion 1969, vol. 25, pp. 222-232.10.5006/0010-9312-25.5.222 ↗
35. R. Darolia, D.F. Lahrman, and R.D. Field: in: Superalloys 1988: Proceedings of the Sixth International Symposium on Superalloys, The Metallurgical Society of AIME, Pennsylvania, 1988, pp. 255–64.
36. R.A Hobbs, L. Zhang, C.M.F. Rae and S. Tin, Metall. Mater. Trans. A 2008, vol. 39A, pp. 1014-25.10.1007/s11661-008-9490-9 ↗
37. K Hiraga, T Yamamoto and M Hirabayashi, T. Jap. Ins. Met. 1983, vol. 24, pp. 421-428.10.2320/matertrans1960.24.421 ↗
38. S Hamar-Thibault, M Durand-Charre and B Andries, Metall. Trans. A 1982, vol. 13, pp. 545-550.10.1007/BF02644417 ↗
39. G.V. Prasad Reddy, P. Harini, R. Sandhya, K. Bhanu Sankara Rao, and R.K. Paretkar: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3848–51.10.1016/j.msea.2010.02.062 ↗
40. Sébastien Chomette, J-M Gentzbittel and Bernard Viguier, J. Nucl. Mater. 2010, vol. 399, pp. 266-274.10.1016/j.jnucmat.2010.01.019 ↗
41. G. Bai, J. Li, R. Hu, T. Zhang, H. Kou and H. Fu, Mater. Sci. Eng. A 2011, vol. 528, pp. 2339-44.10.1016/j.msea.2010.11.088 ↗
42. FJ Liu, MC Zhang, JX Dong and YW Zhang, Acta Metall. Sin.-Engl. 2007, vol. 20, pp. 102-110.10.1016/S1006-7191(07)60014-3 ↗
43. RE Lobnig, HP Schmidt, K Hennesen and HJ Grabke, Oxid. Met. 1992, vol. 37, pp. 81-93.10.1007/BF00665632 ↗
44. He Jiang, Jianxin Dong, Maicang Zhang, Lei Zheng and Zhihao Yao, Oxid. Met. 2015, vol. 84, pp. 61-72.10.1007/s11085-015-9543-6 ↗
45. Qingbo Jia and Dongdong Gu, Optics & Laser Technology 2014, vol. 62, pp. 161-171.10.1016/j.optlastec.2014.03.008 ↗
46. Alenka Vesel, Aleksander Drenik, Kristina Elersic, Miran Mozetic, Janez Kovac, Tomaz Gyergyek, Jan Stockel, Jozef Varju, Radomir Panek and Marianne Balat-Pichelin, Appl. Surf. Sci. 2014, vol. 305, pp. 674-682.10.1016/j.apsusc.2014.03.160 ↗
47. CV Robino, Metall and Materi Trans B 1996, vol. 27, pp. 65-69.10.1007/BF02915078 ↗
48. Q Pang, GH Wu, ZY Xiu, LT Jiang and DL Sun, Mater. Charact. 2012, vol. 70, pp. 125-136.10.1016/j.matchar.2012.05.010 ↗
49. Lei Zheng, Maicang Zhang and Jianxin Dong, Appl. Surf. Sci. 2010, vol. 256, pp. 7510-7515.10.1016/j.apsusc.2010.05.098 ↗
50. Wenqing Wei, Hongwei Wang, Chunming Zou, Zhaojun Zhu and Zunjie Wei, Mater. Des. 2013, vol. 46, pp. 1-7.10.1016/j.matdes.2012.09.046 ↗
51. P Berthod, S Michon, J Di Martino, S Mathieu, S Noël, R Podor and C Rapin, Calphad 2003, vol. 27, pp. 279-288.10.1016/j.calphad.2003.12.002 ↗
52. Shuangqun Zhao, Xishan Xie and Gaylord D Smith, Surf. Coat. Technol. 2004, vol. 185, pp. 178-183.10.1016/j.surfcoat.2003.12.003 ↗
53. Song Zhang, Qi Wang, Xiao-shu ZHAO and Chun-hua ZHANG, Journal of Shenyang University of Technology 2010, vol. 32, pp. 136-140.
54. X-M Hou and K-C Chou, J. Eur. Ceram. Soc. 2009, vol. 29, pp. 517-523.10.1016/j.jeurceramsoc.2008.06.015 ↗
55. JS Hou and JT Guo, J. Mater. Eng. Perform. 2006, vol. 15, pp. 67-75.10.1361/105994906X83501 ↗
56. XP Tan, JL Liu, T Jin, ZQ Hu, HU Hong, BG Choi, IS Kim and CY Jo, Philos. Mag. Lett. 2012, vol. 92, pp. 556-562.10.1080/09500839.2012.700409 ↗
57. J Brenneman, J Wei, Z Sun, L Liu, G Zou and Y Zhou, Corros. Sci. 2015, vol. 100, pp. 267-274.10.1016/j.corsci.2015.07.031 ↗
58. N. Birks, G.H. Meier and F.S. Pettit: Introduction to the High Temperature Oxidation of Metals. (Cambridge: Cambridge University Press, 2006).10.1017/CBO9781139163903 ↗
59. Jérôme Chapovaloff, Fabien Rouillard, Krzysztof Wolski and Michèle Pijolat, Corros. Sci. 2013, vol. 69, pp. 31-42.10.1016/j.corsci.2012.09.045 ↗
60. D.A. Jones, Principles and Prevention of Corrosion, Upper Saddle River, NY: Prentice Hall 1996, pp. 168-98.
61. SC Tsai, AM Huntz, C Dolin and C Monty, Radiat Eff. Defects Solids 1995, vol. 137, pp. 285-290.10.1080/10420159508222736 ↗
62. A.C.S. Sabioni, A.M. Huntz, F. da Silva and F. Jomard, Mater. Sci. Eng. A 2005, vol. 392, pp. 254-61.10.1016/j.msea.2004.09.033 ↗