journal article·2019-08-15Open access

An Analysis of the Tensile Deformation Behavior of Commercial Die-Cast Magnesium-Aluminum-Based Alloys

Hua Qian Ang, Trevor B. Abbott, Suming Zhu, Mark A. Easton

Abstract

Magnesium and its alloys have a complex progression of deformation mechanisms due to the hexagonal closed-packed crystal structure. Magnesium undergoes a series of different deformation modes as stress increases. The deformation behavior is marked by the commencement of elastic (Stage I), followed by 〈a〉 basal slip and twinning (Stage II), 〈a〉 prismatic slip (Stage III) and finally 〈c + a〉 pyramidal slip (Stage IV). In this study, the deformation behavior of a range of commercial die-cast magnesium-aluminum-based alloys are analyzed. Four distinct stages of strain hardening can be seen in the tensile stress–strain curve and these are modeled according to the assumption that they correspond to the four deformation mechanisms. It is shown that both Stages I and III can be described by a linear equation while Stages II and IV follow a power-law relationship and fitted with Hollomon’s equation. A semi-empirical equation is proposed to model the entire stress–strain curve, which provides a simple way to understand the deformation of magnesium alloys and points towards better methods of modeling magnesium alloy behavior in part design.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. P. Bakke, K. Pettersen, H. Westengen: J. Miner. Metals Mater. Soc., 2003, vol. 55, pp. 46-51.10.1007/s11837-003-0210-z ↗
2. M. Avedesian, H. Baker: Magnesium and magnesium Alloys—ASM Specialty Handbook, vol. 52, ASM International. Ohio: The Materials Information Society, 1999.
3. B.L. Mordike, T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37-45.10.1016/S0921-5093(00)01351-4 ↗
4. H.Q.Ang, S.M.Zhu, T.B.Abbott, D.Qiu, M.A.Easton: Mater. Sci. Eng. A, 2017, vol. 699, pp. 239-246.10.1016/j.msea.2017.05.093 ↗
5. H.Q. Ang, T.B. Abbott, S.M. Zhu, M.A. Easton: Mater. Sci. Eng. A, 2017, vol. 707, pp. 101-109.10.1016/j.msea.2017.09.012 ↗
6. H.Q. Ang: Mechanical Properties and Deformation Behaviour of High-Pressure Die-Cast Magnesium-Aluminium Based Alloys [dissertation], Royal Melbourne Institute of Technology, Melbourne, 2017.
7. H.Q. Ang, T.B. Abbott, S.M. Zhu, C.F. Gu, M.A. Easton: Mater. Des., 2016, vol. 112, pp. 402-409.10.1016/j.matdes.2016.09.088 ↗
8. C.H. Cáceres, T. Sumitomo, M. Veidt: Acta Mater., 2003, vol. 51, pp. 6211-6218.10.1016/S1359-6454(03)00444-0 ↗
9. G.E. Mann, T. Sumitomo, C.H. Cáceres, J.R. Griffiths: Mater. Sci. Eng. A, 2007, vol. 456, pp. 138-146.10.1016/j.msea.2006.11.160 ↗
10. D. Nagarajan, X. Ren, C.H. Cáceres: Mater. Sci. Eng. A., 2017, vol. 696, pp. 387-392.10.1016/j.msea.2017.04.069 ↗
11. D. Nagarajan: Mater. Sci. Eng. A., 2017, vol. 695, pp. 14-19.10.1016/j.msea.2017.03.094 ↗
12. A.D. Rollett, U.F. Kocks: A Review of the Stages of Work Hardening, Proceedings of Dislocations-93 Conference, 1993 Apr 1–9, Aussois, France, Trans Tech Publ, 1993, pp. 1–18.10.4028/www.scientific.net/SSP.35-36.1 ↗
13. U.F. Kocks, H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171-273.10.1016/S0079-6425(02)00003-8 ↗
14. K.V. Yang, C.H. Cáceres, A.V. Nagasekhar, M.A. Easton: Model. Simul. Mater. Sci. Eng., 2012, vol. 20, pp. 024010.10.1088/0965-0393/20/2/024010 ↗
15. K.V. Yang, C.H. Cáceres, C.N. Tomé: in Magnesium Technology 2012, S.N. Mathaudhu, W.H. Sillekens, N.R. Neelameggham, N. Hort, eds., The Minerals, Metals & Materials Society, 2012 Mar 11–15, Orlando, Florida, 2012, pp. 127–31.
16. C.H. Cáceres, P. Lukáč: Philos. Mag., 2008, vol. 88, pp. 977-989.10.1080/14786430801968611 ↗
17. C.H Cáceres, A. Blake: Mater. Sci. Eng. A, 2007, vol. 462, pp. 193-196.10.1016/j.msea.2005.12.113 ↗
18. Z.J. Lu, P. Blackmore: SAE Int. J. Mater. Manuf., 2014, vol. 7, pp. 446-453.10.4271/2014-01-0969 ↗
19. A. Akhtar, E. Teghtsoonian: Mater. Trans., 1968, vol. 9, pp. 692-697.
20. S.R. Agnew, C.N. Tomé, D.W. Brown, T.M. Holden, S.C. Vogel: Scr. Mater., 2003, vol. 48, pp. 1003-1008.10.1016/S1359-6462(02)00591-2 ↗
21. H. Wang, P. Wu, J. Wang: Int. J. Plast., 2013, vol. 47, pp. 49-64.10.1016/j.ijplas.2013.01.007 ↗
22. P.G. Partridge: Metall. Rev., 1967, vol. 12, pp.169-194.10.1179/imr.1967.12.1.169 ↗
23. N. Stanford, M. Barnett: Int. J. Plast., 2013, vol. 47, pp. 165-181.10.1016/j.ijplas.2013.01.012 ↗
24. H. Qiao, S. Agnew, P. Wu: Int. J. Plast., 2015, vol. 65, pp. 61-84.10.1016/j.ijplas.2014.08.010 ↗
25. J. Balík, P. Dobroň, F. Chmelík, R. Kužel, D. Drozdenko, J. Bohlen, D. Letzig, P. Lukáč: Int. J. Plast., 2016, vol. 76, pp. 166-185.10.1016/j.ijplas.2015.08.001 ↗
26. R.V. Mises: J. Appl. Math. Mech., 1928, vol. 8, pp. 161-185.
27. G.I. Taylor: Inst. Metal, 1938, vol. 62, pp. 307-324.
28. C.H. Cáceres, P. Lukáč, A.H. Blake: Philos. Mag., 2008, vol. 88, pp. 991-1003.10.1080/14786430701881211 ↗
29. B.C. Wonsiewicz: Plasticity of magnesium crystals [dissertation], Massachusetts Institute of Technology, Cambridge, 1966.
30. G.E. Dieter: Mechanical Metallurgy, SI Metric ed., McGraw-Hill Book Company, London, 1988.
31. A. Staroselsky, L. Anand: Int. J. Plast., 2003, vol. 19, pp. 1843-1864.10.1016/S0749-6419(03)00039-1 ↗
32. S. Agnew, M. Yoo, C. Tomé: Acta Mater., 2001, vol. 49, 4277-4289.10.1016/S1359-6454(01)00297-X ↗
33. A. Styczynski, C. Hartig, J. Bohlen, D. Letzig: Scri. Mater., 2004, vol. 50, pp. 943-947.10.1016/j.scriptamat.2004.01.010 ↗
34. M. Barnett, C. Davies, X. Ma: Scri. Mater., 2005, vol. 52, pp. 627-632.10.1016/j.scriptamat.2004.11.022 ↗
35. M. Barnett: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1799-1806.10.1007/s11661-003-0146-5 ↗
36. S.R. Agnew, Ö. Duygulu: Int. J. Plast., 2005, vol. 21, pp. 1161-1193.10.1016/j.ijplas.2004.05.018 ↗
37. X. Lou, M. Li, R. Boger, S. Agnew, R. Wagoner: Int. J. Plast., 2007, vol. 23, pp. 44-86.10.1016/j.ijplas.2006.03.005 ↗
38. H. Takuda, T. Morishita, T. Kinoshita, S. Shirakawa: J. Mater. Process. Technol., 2005, vol. 164, pp. 1258-1262.10.1016/j.jmatprotec.2005.02.034 ↗
39. F. Kabirian, A.S. Khan, T. Gnäupel-Herlod: Int. J. Plast., 2015, vol. 68, pp. 1-20.10.1016/j.ijplas.2014.10.012 ↗
40. W. Wang, J. Liu, A.K. Soh: Acta Mech., 2019, pp. 1–16.
41. G. Proust, C.N. Tomé, A. Jain, S.R. Agnew: Int. J. Plast., 2009, vol. 25, pp. 861-880.10.1016/j.ijplas.2008.05.005 ↗
42. M. Li, X. Lou, J. Kim, R. Wagoner: Int. J. Plast., 2010, vol. 26, pp. 820-858.10.1016/j.ijplas.2009.11.001 ↗
43. H. Wang, P. Wu, C. Tomé, J. Wang: Mater. Sci. Eng. A, 2012, vol. 555, pp. 93-98.10.1016/j.msea.2012.06.038 ↗
44. H. Wang, P. Wu, J. Wang, C. Tomé: Int. J. Plast., 2013, vol. 49, pp. 36-52.10.1016/j.ijplas.2013.02.016 ↗
45. H. Zhang, A. Jérusalem, E. Salvati, C. Papadaki, K.S. Fong, X. Song, A.M. Korsunsky: Int. J. Plast., 2019, doi.org/10.1016/j.ijplas.2019.02.018, [article in press].
46. Y. Wang, J. Huang: Acta Mater., 2017, vol. 55, pp. 897-905.10.1016/j.actamat.2006.09.010 ↗
47. M. Barnett, O. Bouaziz, L. Toth: Int. J. Plast., 2015, vol. 72, pp. 151-167.10.1016/j.ijplas.2015.05.003 ↗
48. U.F. Kocks: Metall. Mater. Trans., 1970, vol. 1, pp. 1121-1143.10.1007/BF02900224 ↗
49. A.V. Nagasekhar, M.A. Easton, C.H. Cáceres: Adv. Eng. Mater., 2009, vol. 11, pp. 912-919.10.1002/adem.200900175 ↗
50. M. Easton, W. Qian Song, T. Abbott: Mater. Des., 2006, vol. 27, pp. 935-946.10.1016/j.matdes.2005.03.005 ↗
51. S.M. Zhu, T.B. Abbott, M.A. Gibson, J.F. Nie, M.A. Easton: Mater. Sci. Eng. A., 2016, vol. 656, pp. 34-38.10.1016/j.msea.2016.01.012 ↗
52. [52] M.A. Meyers: Dynamic Behaviour of Materials, John Wiley & Sons, New York, 1994.10.1002/9780470172278 ↗
53. T. Sumitomo, C.H. Cáceres, M. Veidt: J. Light Metals, 2002, vol. 2, pp. 49-56.10.1016/S1471-5317(02)00013-5 ↗
54. M. Pekguleryuz, K. Kainer, A. Kaya: Fundamentals of Magnesium Alloy Metallurgy, first ed., Woodhead Publishing, Cambridge, 2013.10.1533/9780857097293 ↗
55. M.H. Yoo: Metall. Trans. A., 1981, vol. 12, pp. 409-418.10.1007/BF02648537 ↗
56. J.W. Christian, S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1-157.10.1016/0079-6425(94)00007-7 ↗
57. T.W. Duerig, R. Zadno: in Engineering Aspects of Shape Memory Alloys, T.W. Duerig, K.N. Melton, D. Stockel, C.M. Wayman, eds., Butterworth-Heinemann Publisher, Oxford, 1990, pp. 369–93.10.1016/B978-0-7506-1009-4.50036-6 ↗
58. O. Muránsky, D.G. Carr, P. Šittner, E.C. Oliver: Int. J. Plast., 2009, vol. 25, pp. 1107-1127.10.1016/j.ijplas.2008.08.002 ↗
59. Q. Ma, B. Li, A.L. Oppedal, W.R. Whittington, S.J. Horstemeyer, E.B. Marin, P.T. Wang, M.F. Horstemeyer: Mater. Sci. Eng. A., 2013, vol. 559, pp. 314-318.10.1016/j.msea.2012.08.104 ↗
60. M.A. Meyers, O. Vöhringer, V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025-4039.10.1016/S1359-6454(01)00300-7 ↗
61. I. Ulacia, N.V. Dudamell, F. Gálvez, F, S. Yi, M.T. Pérez-Prado, I. Hurtado: Acta Mater., 2010, vol. 58, pp. 2988-2998.10.1016/j.actamat.2010.01.029 ↗
62. C. Bettles, M. Barnett, eds.: Advances in wrought magnesium alloys: Fundamentals of processing, properties and applications, Woodhead Publishing, Cambridge, 2012.
63. D. Nagarajan, C.H. Cáceres, J.R. Griffiths: in Proceedings of the 12th International Symposium on Physics of Materials, F. Chmelík, R. Král, J.L. Martin, eds., Acta Phys. Polonica A., 2012, vol. 122, No. 3.10.12693/APhysPolA.122.501 ↗
64. D. Drozdenko, J. Čapek, B. Clausen, A. Vinogradov, K. Máthis: J. Alloys Compd., 2019, vol. 786, pp. 779-790.10.1016/j.jallcom.2019.01.358 ↗
65. R.E. Reed-Hill, E.P. Dahlberg, W.A. Slippy Jr: Trans. Met. Soc. AIME., 1965, vol. 233, pp. 1766-1770.
66. Y. Cui, Y. Li, Z. Wang, X. Ding, Y. Koizumi, H. Bian, L.Y. Lin, A. Chiba: Int. J. Plast., 2017, vol. 91, pp. 134-159.10.1016/j.ijplas.2016.09.014 ↗
67. H. Mecking, U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865-1875.10.1016/0001-6160(81)90112-7 ↗
68. P.B. Hirsch, T.E. Mitchell, Can. J. Phys., 1967, vol. 45, pp. 663-706.10.1139/p67-054 ↗
69. U.F. Kocks: Philos. Mag., 1966, vol. 13, pp. 541-566.10.1080/14786436608212647 ↗
70. W.D. Callister, D.G. Rethwisch: Materials Science and Engineering: An Introduction, eighth ed., Wiley, New York, 2007.
71. J.H. Hollomon: Aime Trans., 1945, vol. 12, pp. 1-22.
72. H. Kleemola, M. Nieminen: Metall. Trans., 1974, vol. 5, pp. 1863-1866.10.1007/BF02644152 ↗
73. [73] P. Ludwik: Elemente des technologischen Mechanik, Verlag von Julius Springer, Berlin 1909.10.1007/978-3-662-40293-1 ↗
74. S. Kleiner, P.J Uggowitze: Mater. Sci. Eng. A, 2004, vol. 379, pp. 258-263.10.1016/j.msea.2004.02.020 ↗
75. B. Wonsiewicz, W. Backofen: Trans. Metall. Soc. AIME, 1967, vol. 239, pp. 1422-1433.
76. S. Agnew, D. Brown, C. Tomé: Acta Materialia, 2006, vol. 54, pp. 4841-4852.10.1016/j.actamat.2006.06.020 ↗
77. K. Máthis, Z. Trojanova, P. Lukáč, C.H. Cáceres, J. Lendvai: J. Alloys Compd., 2004, vol. 378, pp. 176-179.10.1016/j.jallcom.2003.10.098 ↗
78. H. Wang, P. Wu, S. Kurukuri, M.J. Worswick, Y. Peng, D. Tang, D. Li: Int. J. Plast., 2018, vol. 107, pp. 207-222.10.1016/j.ijplas.2018.04.005 ↗
79. D. Nagarajan, C. Cáceres: Metall. Mater. Trans. A, 2018, vol. 49, pp. 5288-5297.10.1007/s11661-018-4810-1 ↗
80. B. Zhang, A.V. Nagasekhar, T. Sivarupan, C.H. Cáceres: Adv. Eng. Mater., 2013, vol. 15, pp. 1059-1067.10.1002/adem.201300138 ↗
81. B. Zhang, K.V. Yang, A.V. Nagasekhar, C.H. Cáceres, M.A. Easton: J. Miner. Metals Mater. Soc., 2014, vol. 66, pp. 2086-2094.10.1007/s11837-014-1147-0 ↗
82. K.V. Yang, C.H. Cáceres, M.A. Easton: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4117-4128.10.1007/s11661-014-2326-x ↗
83. G. Nayyeri, W.J. Poole, C.W. Sinclair, S. Zaefferer: Scr. Mater., 2018, vol. 156, pp. 37-41.10.1016/j.scriptamat.2018.07.003 ↗
84. H.J. Bong, X. Hu, X. Sun, Y. Ren: Int. J. Plast., 2019, vol. 113, pp. 35-51.10.1016/j.ijplas.2018.09.005 ↗
85. C. Paramatmuni, A.K. Kanjarla: Int. J. Plast., 2019, vol. 113, pp. 269-290.10.1016/j.ijplas.2018.10.007 ↗
86. H. Asgari, A. Odeshi, J. Szpunar, L. Zeng, E. Olsson, D. Li: Mater. Sci. Eng. A, 2015, vol. 623, pp. 10-21.10.1016/j.msea.2014.11.025 ↗
87. H. Asgari, J. Szpunar, A. Odeshi: Mater. Des., 2014, vol. 61, pp. 26-34.10.1016/j.matdes.2014.04.049 ↗
88. Q. Sun, A. Ostapovets, X. Zhang, L. Tan, Q. Liu: Philos. Mag., 2018, vol. 98, pp. 741-751.10.1080/14786435.2017.1417648 ↗
89. B. Zhu, X. Liu, C. Xie, Y. Wu, J. Zhang: Vac., 2019, vol. 160, pp. 279-285.10.1016/j.vacuum.2018.11.040 ↗