Effects of Different Graphite Types on the Thermal Fatigue Behavior of Bionic Laser-Processed Gray Cast Iron
Source abstract
Abstract
In order to study the thermal fatigue behavior of bionic gray cast iron with different types of graphite (from A to E), first, the effects of A to E types of graphite on the thermal fatigue properties were studied. At the same time, the crack initiation and propagation modes of different gray cast iron types were analyzed. In addition, for improving the thermal fatigue properties of gray cast iron, the anti-fatigue mechanism of the coupled bionic structure on gray cast iron was investigated. In this case, the thermal fatigue properties were measured by the number, length, and width of cracks. The results revealed that the gray cast iron with A-type graphite had the best fatigue resistance compared to others. However, C-, D-, and E-type graphite exhibited the greatest effect on the number, length, and width of crack. Interestingly, the bionic gray cast iron sample with D-type graphite exhibited improved fatigue resistance most obviously compared to the non-bionic sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. X. Yang, Z.H. Zhang, J.T. Wang and L.Q. Ren, Journal of Alloys and Compounds 2015, vol. 626, pp. 260-263.10.1016/j.jallcom.2014.11.169 ↗
2. A. Vadiraj, G. Balachandran, M. Kamaraj, B. Gopalakrishna and D. Venkateshwara-Rao: Tribology International 2010, vol. 43, pp. 647–653.10.1016/j.triboint.2009.10.004 ↗
3. Steven C. Noe Thomas J. Mackin: Engineering Failure Analysis 2002, vol. 9, pp. 63-76.10.1016/S1350-6307(00)00037-6 ↗
4. G. L. Rivera, R. E. Boeri and J. A. Sikora: Scripta Materialia 2004, vol. 50, pp. 331-335.10.1016/j.scriptamat.2003.10.019 ↗
5. Morris E. Fine: Metallurgical and Materials Transactions A 1980, vol. 11A, pp. 365-379.10.1007/BF02654560 ↗
6. A. R. Ghaderi, M. Nili-Ahmadabadi, H.M. Ghasemi: Wear 2003, vol. 255, pp. 410-416.10.1016/S0043-1648(03)00156-X ↗
7. G. P. Reddy, M.C. Rukadikar: Journal of Agricultural Engineering Research 1986, vol. 21, pp. 4403-4410.
8. W. Xue and Y. Li: Journal of Alloys and Compounds 2016, vol. 689, pp. 408-415.10.1016/j.jallcom.2016.07.052 ↗
9. P. Yi, Y. Liu, C. Fan, X. Zhan, P. Xu and T. Liu: Optics & Laser Technology 2017, vol. 90, pp. 52-64.10.1016/j.optlastec.2016.11.011 ↗
10. Byeong-choon Goo and Choong-hwan Lim: Journal of Mechanical Science and Technology 2012, vol. 26, pp. 1719-1724.10.1007/s12206-012-0435-2 ↗
11. U. G. Wegst, H. Bai, E. Saiz, A. P. Tomsia and R. O. Ritchie: Nature materials 2015, vol. 14, pp. 23-36.10.1038/nmat4089 ↗
12. L. Ren and X. Li: Science China Technological Sciences 2013, vol. 56, pp. 884-897.10.1007/s11431-013-5158-9 ↗
13. C. Meng, H. Zhou, Y. Zhou, M. Gao, X. Tong, D. Cong, C. Wang, F. Chang, L.Ren: Optics & Laser Technology 2014, vol. 57, pp. 57-65.10.1016/j.optlastec.2013.09.038 ↗
14. T. Xin, Z. Hong, C. Li, Z. Zhihui and R. Luquan: International Journal of Fatigue 2008, vol. 30, pp. 1125-1133.10.1016/j.ijfatigue.2007.07.004 ↗
15. X. Tong, H. Zhou, L. Ren, Z. Zhang, W. Zhang and R. Cui: International Journal of Fatigue 2009, vol. 31, pp. 668-677.10.1016/j.ijfatigue.2008.03.023 ↗
16. Q. Sui, H. Zhou, D. Zhang, Z. Chen and P. Zhang: Metallurgical and Materials Transactions A 2017, vol. 48, pp. 3758-3769.10.1007/s11661-017-4142-6 ↗
17. L. Yang, G. Sun, and Y. Zhang: Microstructure of Cast Irons—Part 1: Graphite Classification by Visual Analysis, MOD, ISO 945-1: 2008.
18. X. Tong, H. Zhou, W. Chen, W. Jiang, X. Li, L. Ren, Z. Zhang: Optics &Laser Technology 2009, vol. 41, pp. 671-678.10.1016/j.optlastec.2009.02.002 ↗
19. R. C. Hugo, H. Kung, J. R. Weertman, R. Mitra, J. A. Knapp, D. M. Follstaedt: Acta Materialia 2003, vol. 51, pp. 1937-1943.10.1016/S1359-6454(02)00599-2 ↗
20. R. L. Hecht, R. B. Dinwiddie, H. Wang: Journal of Materials Science 1999, vol. 34, pp. 4775-4781.10.1023/A:1004643322951 ↗
21. Z. Jing, H. Zhou, P. Zhang, C. Wang, C. Meng and D. Cong: Applied Surface Science 2013, vol. 271, pp. 329-336.10.1016/j.apsusc.2013.01.193 ↗
22. Erwin Gamboa and Andrej Atrens: Engineering Failure Analysis 2003, vol. 10, pp. 521-558.10.1016/S1350-6307(03)00036-0 ↗
23. X. Wang, W. Zhang, B. Guo and W. Zhao: Materials Science and Engineering: A 2014, vol. 609, pp. 310-317.10.1016/j.msea.2014.05.012 ↗
24. J. Grum and J. M. Slabe: Applied Surface Science 2006, vol. 252, pp. 4486-4492.10.1016/j.apsusc.2005.06.060 ↗
25. A. V. Gusarov, M. Pavlov and I. Smurov: Physics Procedia 2011, vol. 12, pp. 248-254.10.1016/j.phpro.2011.03.032 ↗
26. J. Schijve: Fatigue of Structures and Materials, 2nd ed., Springer, New York, 2008, pp. 13-56.
27. K. Shi, S. Hu and H. Zheng: Surface and Coatings Technology 2011, vol. 206, pp. 1211-1217.10.1016/j.surfcoat.2011.08.034 ↗