Investigation of the Structure and Properties of the Fe-Ni-Co-Cu-V Multiprincipal Element Alloys
Source abstract
Abstract
The effect of V addition to the Fe-Ni-Co-Cu system was analyzed in the present work. Three distinct alloys were prepared in a vacuum electric arc furnace in an argon atmosphere and later cast into a copper mold. Investigation of the structure of alloys was performed by scanning electron microscopy (SEM) and by X-ray diffraction. The mechanical properties were also tested in compression. The phase diagrams of the Fe-Ni-Co-Cu-V system were thermodynamically calculated and the results are compared with those of differential scanning calorimetry and the results of SEM observation. It is shown that as a result of crystallization, two solid solutions with FCC crystal structures are formed. The addition of equiatomic amount of vanadium to Fe-Ni-Co-Cu system alloys facilitates phase separation in the liquid state. The addition of V causes an increase in the yield strength by solid solution hardening by about 30 pct and maximum true stress by 40 pct, yet retaining good plasticity. It also does not cause formation of an intermetallic compound.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau and S.Y. Chang: Adv. Eng. Mater., 2004, V.6, pp. 299-303.10.1002/adem.200300567 ↗
2. B. Cantor: Entropy, 2014, V.16(9), pp. 4749-68.10.3390/e16094749 ↗
3. I. A. Tomilin and S. D. Kaloshkin: Mater. Sci. and Tech., 2015, V.31, pp. 1231-34.10.1179/1743284715Y.0000000028 ↗
4. D.B. Miracle and O.N. Senkov: Acta Mater., 2017, V.122, pp. 448-511.10.1016/j.actamat.2016.08.081 ↗
5. E. Fazakas, V. Zadorozhnyy and D. V. Louzguine-Luzgin: Appl. Surf. Sci., 2015, V. 358, pp. 549-55.10.1016/j.apsusc.2015.07.207 ↗
6. K.Y. Tsai, M.H. Tsai and J.W. Yeh: Acta Mater., 2013,V. 61, pp. 4887–97.10.1016/j.actamat.2013.04.058 ↗
7. Y.J. Zhou, Y. Zhang, Y.L. Wang and G.L. Chen: Appl. Phys. Lett., 2007, V. 90, pp. 181904 (1-3).10.1063/1.2734517 ↗
8. S.T. Chen, W.Y. Tang, Y.F. Kuo, S.Y. Chen, C.H. Tasu, T.T. Shun and J.W. Yeh: Mater. Sci. Eng. A, 2010, V. 527, pp. 5818-25.10.1016/j.msea.2010.05.052 ↗
9. W.R. Wang, W.L. Wang, S.C. Wang; Y.C. Tsai, C.H. Lai and J.W. Yeh: Intermetallics 2012, V.26, pp. 44–51.10.1016/j.intermet.2012.03.005 ↗
10. J.Y. He, W.H. Liu, H. Wang, Y. Wu, X.J. Liu, T.G. Nieh and Z.P. Lu: Acta Mater., 2014, V. 62, pp. 105–13.10.1016/j.actamat.2013.09.037 ↗
11. J.W. Yeh, S.J. Lin, T.S. Chin, J.Y. Gan, S.K. Chen, T.T. Shun, C.H. Tsau and S.Y. Chou: Metall. Mater. Trans. A, 2004, V. 35, pp. 2533-6.10.1007/s11661-006-0234-4 ↗
12. Y. Zhang, S. G. Ma and J. W. Qiao: Metall. Mater. Trans. A, 2012, V. 43, pp. 2625–30.10.1007/s11661-011-0981-8 ↗
13. O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang and P.K. Liaw: Intermetallics, 2010, V. 18, pp. 1758–65.10.1016/j.intermet.2010.05.014 ↗
14. E. Fazakas, V Zadorozhnyy, L. Varga, A. Inoue, D. V. Louzguine-Luzgin, F. Tian, and L. Vitos: Int. J. Refract. Met. Hard Mater., 2014, V.47, pp. 131–38.10.1016/j.ijrmhm.2014.07.009 ↗
15. O. Senkov, S.Senkova, C. Woodward and D. Miracle: Acta Mater., 2013, V. 61, pp. 1545–57.10.1016/j.actamat.2012.11.032 ↗
16. N. Stepanov, N.Y. Yurchenko, D. Shaysultanov, G. Salishchev and M. Tikhonovsky: Mater. Sci. Technol., 2015, V.31, pp. 1184–93.10.1179/1743284715Y.0000000032 ↗
17. K.M. Youssef, A.J. Zaddach, C.Niu, D.L. Irving and C.C. Koch: Mater. Res. Lett., 2015, V.3,pp. 95–99.10.1080/21663831.2014.985855 ↗
18. H. Diao, L.J.Santodonato, Z.Tang, T.Egami and P.K. Liaw: JOM, 2015, V.67, pp. 2321–25.10.1007/s11837-015-1591-5 ↗
19. Y.Z. Shi, B. Yang and P. K. Liaw: Metals, 2017, V. 7(2), 43.10.3390/met7020043 ↗
20. M.C. Troparevsky, J.R. Morris, M. Daene, Y. Wang, A.R. Lupini and G.M. Stocks: JOM, 2015, V.67, pp. 2350-63.10.1007/s11837-015-1594-2 ↗
21. B. Cantor, I.T.H. Chang, P. Knight and A.J.B. Vincent: Mater. Sci. Eng. A, 2004, V. 375–377, pp. 213–18.10.1016/j.msea.2003.10.257 ↗
22. F. Otto, Y. Yang, H. Bei and E.P. George: Acta Mater., 2013, vol. 61, pp. 2628–38.10.1016/j.actamat.2013.01.042 ↗
23. K.B. Zhang and Z.Y. Fu: Intermetallics, 2012, V.22, pp. 24-32.10.1016/j.intermet.2011.10.010 ↗
24. C. Zhang, F. Zhang, S. Chen and W. Cao: JOM, 2012, V. 64(7), pp. 839–45.10.1007/s11837-012-0365-6 ↗
25. F. Zhang, C. Zhang, S. Chen, J. Zhu, W. Cao and U.R. Kattner: CALPHAD, 2014, V. 45, pp.1–10.10.1016/j.calphad.2013.10.006 ↗
26. M.C. Gao and D.E. Alman: Entropy, 2013, V. 15, pp. 4504–19.10.3390/e15104504 ↗
27. R. Feng, M.C. Gao, C. Lee, M. Mathes, T. Zuo, S. Chen, J.A. Hawk, Y. Zhang and P.K. Liaw: Entropy, 2016, vol. 18, pp. 333 (1–21).10.3390/e18090333 ↗
28. M.C. Gao, B. Zhang, S. Yang and M. Guo: Metall. Mater. Trans. A, 2016, V. 47: 3333-9.10.1007/s11661-015-3105-z ↗
29. M.-R. Chen, S.-J. Lin, J.-W. Yeh, M.-H. Chuang, S.-K. Chen and Y.-S. Huang: Metall. Mater. Trans. A, 2006, V.37, pp 1363–69.10.1007/s11661-006-0081-3 ↗
30. G.A. Salishchev, M.A. Tikhonovsky, D.G. Shaysultanov, N.D. Stepanov, A.V. Kuznetsov, I.V. Kolodiy, A.S. Tortika and O.N. Senkov: J. All. Comp., 2014, V.591, pp.11–21.10.1016/j.jallcom.2013.12.210 ↗
31. M.A. Burlington, Smithells Metals Reference Book. 8th ed. in: W.F. Gale, T.C. Totemeier (eds.), ASM International Metals Reference Book, Elsevier Butterworth-Heinemann Ltd., Oxford UK, 2004, pp. 4-44.
32. M.C. Troparevsky, J.R. Morris, P.R. C. Kent, A.R. Lupini and G. M. Stocks: Phys. Rev. X, 2015, V.5, 011041.
33. M.A. Burlington, Smithells Metals Reference Book. 8th ed. in: W.F. Gale, T.C. Totemeier (eds.), ASM International Metals Reference Book, Elsevier Butterworth-Heinemann Ltd., Oxford UK, 2004, pp. 11-11.
34. D.V. Louzguine-Luzgin, T. Saito, J. Saida and A. Inoue: J. Mater. Res., 2008, V.23, pp. 515-22.10.1557/JMR.2008.0066 ↗
35. L. Liu, J.B. Zhu, C. Zhang, J.C. Liu and Q. Jiang: Mater. Sci. Eng. A, 2012,V. 548, pp. 64–68.10.1016/j.msea.2012.03.080 ↗