Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation
Source abstract
Abstract
Powder forged connecting rods have the problem of non-uniform density distributions because of their complex geometric shape. The densification behaviors of powder metallurgy (PM) connecting rod preforms during hot forging processes play a significant role in optimizing the connecting rod quality. The deformation behaviors of a connecting rod preform, a Fe-3Cu-0.5C (wt pct) alloy compacted and sintered by the powder metallurgy route (PM Fe-Cu-C), were investigated using the finite element method, while damage and friction behaviors of the material were considered in the complicated forging process. The calculated results agree well with the experimental results. The relationship between the processing parameters of hot forging and the relative density of the connecting rod was revealed. The results showed that the relative density of the hot forged connecting rod at the central shank changed significantly compared with the relative density at the big end and at the small end. Moreover, the relative density of the connecting rod was sensitive to the processing parameters such as the forging velocity and the initial density of the preform. The optimum forging processing parameters were determined and presented by using an orthogonal design method. This work suggests that the processing parameters can be optimized to prepare a connecting rod with uniform density distribution and can help to better meet the requirements of the connecting rod industry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Metallurgy and Material Forming · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. R.M. German: Powder Metallurgy of Iron and Steel, Wiley, New York, 1998, pp. 276–79.
2. F.X. Li, Y.Z. Liu, J. You, and X. Luo: Int. J. Adv. Manuf. Technol., 2013, vol. 67, pp. 2771–78.10.1007/s00170-012-4691-1 ↗
3. F.X. Li and Y.Z. Liu: Trans. Nonferr. Met. Soc., 2013, vol. 24, pp. 2475–81.10.1016/S1003-6326(14)63373-2 ↗
4. O. Moriya, S. Susumu, and O. Kunio: J. Jpn. Soc. Technol. Plast., 1979, vol. 20, pp. 21037–44.
5. A.D. Abdullin and A.A. Ershov: Metallurgist, 2014, vol. 58, pp. 339–45.10.1007/s11015-014-9913-3 ↗
6. J.W. Qiu, Y. Liu, B. Liu, Y.B. Liu, B. Wang, E. Ryba, and H.P. Tang: J. Mater. Sci., 2012, vol. 47, pp. 3837–48.10.1007/s10853-011-6239-4 ↗
7. J.W. Qiu, Y. Liu, Y.B. Liu, B. Liu, B. Wang, E. Ryba, and H.P. Tang: Mater. Des., 2012, vol. 33, pp. 213–19.10.1016/j.matdes.2011.07.034 ↗
8. A. Rajeshkannan, K.S. Pandey, S. Shanmugam, and R. Narayanasamy: Mater. Des., 2008, vol. 29, pp. 1862–67.10.1016/j.matdes.2007.02.006 ↗
9. T.S. Cao: Int. J. Solids Struct., 2014, vol. 51, pp. 2370–81.10.1016/j.ijsolstr.2014.03.005 ↗
10. T.S. Cao: Int. J. Mater. Form., 2017, vol. 10, pp. 139–71.10.1007/s12289-015-1262-7 ↗
11. R. El Khaoulani and P.O. Bouchard: Finite Elem. Anal. Des., 2012, vol. 59, pp. 1–10.10.1016/j.finel.2012.04.006 ↗
12. Y. Li, M. Luo, J. Gerlach, and T. Wierzbicki: J. Mater. Process. Technol., 2010, vol. 210, pp. 1858–69.10.1016/j.jmatprotec.2010.06.021 ↗
13. F.X. Li, J.H. Yi, and J. Eckert: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 2971–78.10.1007/s11661-017-4062-5 ↗
14. S. Shima and M. Oyane: Int. J. Mech. Sci., 1976, vol. 18, pp. 285–91.10.1016/0020-7403(76)90030-8 ↗
15. D.C. Chen and C.F. Chen: J. Mater. Process. Technol., 2007, vol. 190, pp. 130–37.10.1016/j.jmatprotec.2007.03.068 ↗
16. M.G. Cockroft and D.J. Latham: J. Inst. Met., 1968, vol. 96, pp. 33–9.
17. D.C. Chen: J. Mater. Process. Technol., 2006, vol. 180, pp. 193–200.10.1016/j.jmatprotec.2006.06.004 ↗
18. S. Kobayashi, S.I. Oh, and T. Altan: Metal Forming and the Finite Element Method, Oxford University Press, New York, 1989.10.1093/oso/9780195044027.001.0001 ↗
19. X.T. Li, M.T. Wang, and F.S. Du: Mater. Sci. Eng., 2005, vol. 408A, pp. 33–41.10.1016/j.msea.2005.04.065 ↗
20. F.X. Li, Y.Z. Liu, and J.H. Yi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4012–21.10.1007/s11661-014-2338-6 ↗
21. H. Grass, C. Krempaszky, and E. Werner: Comput. Mater. Sci., 2006, vol. 36, pp. 480–9.10.1016/j.commatsci.2005.06.003 ↗
22. T.P. Battle: Int. Mater. Rev., 1992, vol. 37, p. 569.10.1179/imr.1992.37.1.249 ↗
23. W.D. Wong-Ángel, L. Téllez-Jurado, J.F. Chávez-Alcalá, E. Chavira-Martínez, and V.F. Verduzco-Cedeño: Mater. Des., 2014, vol. 58, pp. 12–8.10.1016/j.matdes.2014.02.002 ↗
24. E. Honarvar Gheysari, A. Babakhani, and A. Haerian: Int. J. Automot. Eng., 2014, vol. 4, pp. 654–63.