journal article·2017-12

Forecasting Low-Cycle Fatigue Performance of Twinning-Induced Plasticity Steels: Difficulty and Attempt

C. W. Shao, P. Zhang, Z. J. Zhang, R. Liu, Z. F. Zhang

Publisher page

Abstract

We find the existing empirical relations based on monotonic tensile properties and/or hardness cannot satisfactorily predict the low-cycle fatigue (LCF) performance of materials, especially for twinning-induced plasticity (TWIP) steels. Given this, we first identified the different deformation mechanisms under monotonic and cyclic deformation after a comprehensive study of stress–strain behaviors and microstructure evolutions for Fe-Mn-C alloys during tension and LCF, respectively. It is found that the good tensile properties of TWIP steel mainly originate from the large activation of multiple twinning systems, which may be attributed to the grain rotation during tensile deformation; while its LCF performance depends more on the dislocation slip mode, in addition to its strength and plasticity. Based on this, we further investigate the essential relations between microscopic damage mechanism (dislocation–dislocation interaction) and cyclic stress response, and propose a hysteresis loop model based on dislocation annihilation theory, trying to quickly assess the LCF resistance of Fe-Mn-C steels as well as other engineering materials. It is suggested that the hysteresis loop and its evolution can provide significant information on cyclic deformation behavior, e.g., (point) defect multiplication and vacancy aggregation, which may help estimate the LCF properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. M.R. Mitchell: Fatigue and microstructure, ASM, Materials Park, OH, 1978, pp. 385-438.
2. S.S. Manson: Exp. Mech., 1965, vol. 5, pp. 193-226.10.1007/BF02321056 ↗
3. U. Muralidharan and S.S. Manson: J. Eng. Mater. Technol., 1988, vol. 110, pp. 55-58.10.1115/1.3226010 ↗
4. J.H. Ong: Int. J. Fatigue, 1993, vol. 15, pp. 213-219.10.1016/0142-1123(93)90179-T ↗
5. M.L. Roessle and A. Fatemi: Int. J. Fatigue, 2000, vol. 22, pp. 495-511.10.1016/S0142-1123(00)00026-8 ↗
6. J.C. Grosskreutz: Metall. Trans., 1972, vol. 3, pp. 1255-1262.10.1007/BF02642460 ↗
7. H. Mughrabi, H.W. Höppel, and M. Kautz: Scr. Mater., 2004, vol. 51, pp. 807-812.10.1016/j.scriptamat.2004.05.012 ↗
8. X.H. An, Q.Y. Lin, S.D. Wu, Z.F. Zhang, R.B. Figueiredo, N. Gao, and T.G. Langdon: Scr. Mater., 2011, vol. 64, pp. 954-957.10.1016/j.scriptamat.2011.01.041 ↗
9. R. Liu, Z.J. Zhang, P. Zhang, and Z.F. Zhang: Acta Mater., 2015, vol. 83, pp. 341-356.10.1016/j.actamat.2014.10.002 ↗
10. X.H. An, S.D. Wu, Z.G. Wang, and Z.F. Zhang: Acta Mater., 2014, vol. 74, pp. 200-214.10.1016/j.actamat.2014.04.053 ↗
11. K. Lu: Nat. Rev. Mater., 2016, vol. 1, p. 16019.10.1038/natrevmats.2016.19 ↗
12. Y.J. Wei, Y.Q. Li, L.C. Zhu, Y. Liu, X.Q. Lei, G. Wang, Y.X. Wu, Z.L. Mi, J.B. Liu, and H.T. Wang: Nat. Commun., 2014, vol. 5, p. 3580.10.1038/ncomms4580 ↗
13. I. Sen, S. Tamirisakandala, D.B. Miracle, and U. Ramamurty: Acta Mater. 2007, vol. 55, pp. 4983-4993.10.1016/j.actamat.2007.05.009 ↗
14. K.E. Prasad, B. Das, U. Maitra, U. Ramamurty, and C.N.R. Rao: Proc. Natl. Acad. Sci., 2009, vol. 106, pp. 13186-13189.10.1073/pnas.0905844106 ↗
15. O. Grassel, L. Kruger, G. Frommeyer, and L.W. Meyer: Int. J. Plasticity, 2000, vol. 16, pp. 1391-1409.10.1016/S0749-6419(00)00015-2 ↗
16. H.K. Yang, Z.J. Zhang, F.Y. Dong, Q.Q. Duan, and Z.F. Zhang: Mater. Sci. Eng. A, 2014, vol. 607, pp. 551-558.10.1016/j.msea.2014.04.043 ↗
17. B. Bal, B. Gumus, G. Gerstein, D. Canadinc, and H. J. Maier: Mater. Sci. Eng. A 2015, vol. 632, pp. 29-34.10.1016/j.msea.2015.02.054 ↗
18. H.W. Yen, M. Huang, C. P. Scott, and J.R. Yang: Scripta Mater. 2012, vol. 66, pp. 1018-1023.10.1016/j.scriptamat.2012.02.002 ↗
19. C.W. Shao, P. Zhang, R. Liu, Z.J. Zhang, J.C. Pang, Q.Q. Duan, and Z.F. Zhang: Acta Mater., 2016, vol. 118, pp. 196-212.10.1016/j.actamat.2016.07.034 ↗
20. C.W. Shao, F. Shi, and X.W. Li: Metall. Mater. Trans. A, 2015, vol. 46, pp. 1610-1620.10.1007/s11661-015-2769-8 ↗
21. S. Heino and B. Karlsson: Acta Mater., 2001, vol. 49, pp. 339-351.10.1016/S1359-6454(00)00201-9 ↗
22. C.W. Shao, P. Zhang, R. Liu, Z.J. Zhang, J.C. Pang, and Z.F. Zhang: Acta Mater., 2016, vol. 103, pp. 781-795.10.1016/j.actamat.2015.11.015 ↗
23. A.A. Saleh, E.V. Pereloma, and A.A. Gazder: Acta Mater., 2013, vol. 61, pp. 2671-2691.10.1016/j.actamat.2013.01.051 ↗
24. . Polák, F. Fardoun, and S. Degallaix: Mater. Sci. Eng. A, 1996, vol. 215, pp. 104-112.10.1016/0921-5093(96)10373-7 ↗
25. D. Kuhlmann-Wilsdorf, and C. Laird: Mater. Sci. Eng., 1979, vol. 37, pp. 111-120.10.1016/0025-5416(79)90074-0 ↗
26. C.W. Shao, P. Zhang, Z.J. Zhang, and Z.F. Zhang: Scr. Mater. 2017, vol. 140, pp. 76-81.10.1016/j.scriptamat.2017.07.007 ↗
27. L. Lu, X. Chen, X.X. Huang, and K. Lu: Science, 2009, vol. 323, pp. 607-610.10.1126/science.1167641 ↗
28. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2011, vol. 59, pp. 6449-6462.10.1016/j.actamat.2011.07.009 ↗
29. O. Bouaziz, S. Allain, and C. Scott: Scripta Mater. 2008, vol. 58, pp. 484-487.10.1016/j.scriptamat.2007.10.050 ↗
30. M. Abbasi, S. Kheirandish, Y. Kharrazi, and J. Hejazi: Mater. Sci. Eng. A 2009, vol. 513, pp. 72-76.10.1016/j.msea.2009.02.023 ↗
31. B. Bal, M. Koyama, G. Gerstein, H. J. Maier, and K. Tsuzaki: Int. J. Hydrogen Energ. 2016, vol. 41, pp. 15362-15372.10.1016/j.ijhydene.2016.06.259 ↗
32. B. Gumus, B. Bal, G. Gerstein, D. Canadinc, H. J. Maier, F. Guner, and M. Elmadagli: Mater. Sci. Eng. A 2015, vol. 648, pp. 104-112.10.1016/j.msea.2015.09.045 ↗
33. J. Nakano and P.J. Jacques: CALPHAD, 2010, vol. 34, pp. 167-175.10.1016/j.calphad.2010.02.001 ↗
34. S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vol. 387, pp. 158-162.10.1016/j.msea.2004.01.059 ↗
35. S.X. Ding, C.P. Chang, J.F. Tu, and K.C. Yang: Mater. Sci. Technol., 2013, vol. 29, pp. 1048-1054.10.1179/1743284713Y.0000000251 ↗
36. C. Q. Li, D. K. Xu, B. J. Wang, L. Y. Sheng, and E. H. Han: J. Mater. Sci. Technol. 2016, vol. 32, pp. 1232-1238.10.1016/j.jmst.2016.09.018 ↗
37. Y.L. Cai, S.L. Yang, S.H. Fu, D. Zhang, and Q.C. Zhang: J. Mater. Sci. Technol. 2017, vol. 33, pp. 580-586.10.1016/j.jmst.2016.05.012 ↗
38. W.H. Wang, D. Wu, R.S. Chen, and X.N. Zhang: J. Mater. Sci. Technol. 2017. doi:10.1016/j.jmst.2017.06.004.10.1016/j.jmst.2017.06.004 ↗
39. S.J. Lee, J. Kim, S.N. Kane, and B.C. De Cooman: Acta Mater. 2011, vol. 59, pp. 6809-6819.10.1016/j.actamat.2011.07.040 ↗
40. A.H. Cottrell: Trans. Met. Soc. AIME 1958, 212: 192.
41. L. J. Cuddy and W. C. Leslie: Acta Metall. 1972, vol. 20, pp. 1157-1167.10.1016/0001-6160(72)90164-2 ↗
42. L. Buchinger, A.S. Cheng, S. Stanzl, and C. Laird: Mater. Sci. Eng., 1986, vol. 80, pp. 155-167.10.1016/0025-5416(86)90194-1 ↗
43. H. Inui, S.I. Hong, and C. Laird: Acta Metall. Mater., 1990, vol. 38, pp. 2261-2274.10.1016/0956-7151(90)90093-V ↗
44. S. Suresh: Fatigue of materials, Cambridge university press, Cambridge, 1998.10.1017/CBO9780511806575 ↗
45. X.W. Li, N. Peng, X.M. Wu, and Z.G. Wang: Metall. Mater. Trans. A 2014, vol. 45, pp. 3835-3843.10.1007/s11661-014-2353-7 ↗
46. V. Gerold and H.P. Karnthaler: Acta Metall., 1989, vol. 37, pp. 2177-2183.10.1016/0001-6160(89)90143-0 ↗
47. P. Li, S.X. Li, Z.G. Wang, and Z.F. Zhang: Prog. Mater. Sci., 2011, vol. 56, pp. 328-377.10.1016/j.pmatsci.2010.12.001 ↗
48. R. Liu, Z.J. Zhang, and Z.F. Zhang: Mater. Sci. Eng. A, 2016, vol. 666, pp. 123-138.10.1016/j.msea.2016.04.069 ↗
49. Z.J. Zhang, X.H. An, P. Zhang, M.X. Yang, G. Yang, S.D. Wu, and Z.F. Zhang: Scr. Mater., 2013, vol. 68, pp. 389-392.10.1016/j.scriptamat.2012.10.036 ↗
50. D. Barbier, N. Gey, S. Allain, N. Bozzolo, and M. Humbert: Mater. Sci. Eng. A, 2009, vol. 500, pp. 196-206.10.1016/j.msea.2008.09.031 ↗
51. R. Liu, Z.J. Zhang, L.L. Li, X.H. An, and Z.F. Zhang: Sci. Rep., 2015, vol. 5, p. 9550.10.1038/srep09550 ↗
52. R. Ueji, N. Tsuchida, D. Terada, N. Tsuji, Y. Tanaka, A. Takemura, and K. Kunishige: Scr. Mater., 2008, vol. 59, pp. 963-966.10.1016/j.scriptamat.2008.06.050 ↗
53. P. Yang, Q. Xie, L. Meng, H. Ding, and Z. Tang: Scr. Mater., 2006, vol. 55, pp. 629-631.10.1016/j.scriptamat.2006.06.004 ↗
54. P. Yang, L. Meng, Q. Xie, H. Ding, and Z. Tang: Scr. Mater., 2007, vol. 56, pp. 931-934.10.1016/j.scriptamat.2007.02.028 ↗
55. L. Chen, H.S. Kim, S.K. Kim, and B.C. De Cooman: Isij Int., 2007, vol. 47, pp. 1804-1812.10.2355/isijinternational.47.1804 ↗
56. H.K. Yang, Z.J. Zhang, and Z.F. Zhang: Scr. Mater., 2013, vol. 68, pp. 992-995.10.1016/j.scriptamat.2013.02.060 ↗
57. Z.-H. Jin, P. Gumbsch, K. Albe, E. Ma, K. Lu, H. Gleiter, and H. Hahn: Acta Mater., 2008, vol. 56, pp. 1126-1135.10.1016/j.actamat.2007.11.020 ↗
58. K. Lu, L. Lu, and S. Suresh: Science, 2009, vol. 324, pp. 349-352.10.1126/science.1159610 ↗
59. C.E. Feltner and J.D. Morrow: J. Basic Eng., 1961, vol. 83, pp. 15-22.10.1115/1.3658884 ↗
60. J.D. Morrow: ASTM International, 1965, vol. 378, p. 45.
61. A.H. Cottrell: Dislocations and plastic flow in crystals, Clarendon Press, Oxford, 1965.
62. M.A. Meyers and K.K. Chawla: Mechanical behavior of materials, Cambridge university press, Cambridge, 2009.
63. G.I. Taylor: Proc. Roy. Soc., 1934, vol. 145, pp. 362-387.10.1098/rspa.1934.0106 ↗
64. GI Taylor: J. Inst. Metals, 1938, vol. 62, pp. 307–324.
65. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171-273.10.1016/S0079-6425(02)00003-8 ↗
66. T. Rasmussen, K.W. Jacobsen, T. Leffers, O.B. Pedersen, S.G. Srinivasan, and H. Jonsson: Phys. Rev. Lett., 1997, vol. 79, pp. 3676-3679.10.1103/PhysRevLett.79.3676 ↗
67. S.I. Hong and C. Laird: Mater. Sci. Eng. A, 1990, vol. 128, pp. 55-75.10.1016/0921-5093(90)90096-L ↗
68. S. Qu, X.H. An, H.J. Yang, C.X. Huang, G. Yang, Q.S. Zang, Z.G. Wang, S.D. Wu, and Z.F. Zhang: Acta Mater., 2009, vol. 57, pp. 1586-1601.10.1016/j.actamat.2008.12.002 ↗
69. T. Vegge, T. Rasmussen, T. Leffers, O.B. Pedersen, and K.W. Jacobsen: Phys. Rev. Lett., 2000, vol. 85, pp. 3866-3869.10.1103/PhysRevLett.85.3866 ↗
70. T. Rasmussen, K.W. Jacobsen, T. Leffers, and O.B. Pedersen: Phys. Rev. B, 1997, vol. 56, pp. 2977-2990.10.1103/PhysRevB.56.2977 ↗
71. U. Essmann, U. Gösele, and H. Mughrabi: Philos. Mag. A, 1981, vol. 44, pp. 405-426.10.1080/01418618108239541 ↗
72. F. Seitz, In: W. Shockley, R. J. H. Hollomon, R. Maurer, and F. Seitz: Imperfections in Nearly Perfect Crystals, John Wiley & Sons. Inc, New York, 1952, pp. 3-76.
73. .L. Li, Z.J. Zhang, P. Zhang, Z.G. Wang, and Z.F. Zhang: Nat. Commun., 2014, vol. 5, p. 3536.10.1038/ncomms4536 ↗
74. R.J. Amodeo and N.M. Ghoniem: Phys. Rev. B, 1990, vol. 41, pp. 6958-6967.10.1103/PhysRevB.41.6958 ↗
75. I. Groma and B. Bakó: Phys. Rev. Lett., 2000, vol. 84, pp. 1487-1490.10.1103/PhysRevLett.84.1487 ↗
76. J.C. Grosskreutz, H. Mughrabi, and A.S. Argon: Constitutive equations in plasticity, Massachusetts Institute of Technology Press, Cambridge, MA, 1975, pp. 251.
77. A.A. Saleh, E.V. Pereloma, B. Clausen, D.W. Brown, C.N. Tomé, and A.A. Gazder: Acta Mater., 2013, vol. 61, pp. 5247-5262.10.1016/j.actamat.2013.05.017 ↗
78. H. Mughrabi: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1257-1279.10.1007/s11661-009-9839-8 ↗
79. A. Abel and H. Muir: Philos. Mag., 1973, vol. 27, pp. 585-594.10.1080/14786437308219233 ↗