journal article·2017-10

The Effects of Borides on the Mechanical Properties of TLPB Repaired Inconel 738 Superalloy

J. Wei, Y. Ye, Z. Sun, G. Zou, H. Bai, A. Wu, L. Liu

Publisher page

Abstract

The transient liquid phase diffusion bonding (TLPB) method was used to repair an artificial crack in Inconel 738, which was notched by a femtosecond laser. Mixed ratios of BNi-1a:DF-4B were investigated at the bonding temperature of 1373 K (1100 °C) for 2 to 36 hours. The effect of borides on the mechanical properties of TLPB repaired joints was studied through analysis of the microstructure, fracture path, and morphology observations. The borides formation, morphology, distribution, and joints strength were studied in detail. The results showed that the diffusion of B can either increase or decrease the joint strength, depending on its distribution and morphology. The amount of large blocky Ni-B compounds in the precipitate zone were reduced with increasing holding time, which resulted in an increase in joint strength. Nevertheless, further increasing the holding time led to a decrease in joint strength because of the formation of continuous acicular borides in the diffusion-affected zone. The fracture modes of TLPB joints were also discussed on the basis of the microstructure and fractography.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. V. Jalilvand, H. Omidvar, H.R. Shakeri, and M.R. Rahimipour: Mater. Charact., 2013, vol. 75, pp. 20-8.10.1016/j.matchar.2012.10.004 ↗
2. 2.O.A. Ojo, N.L. Richards, and M.C. Charturvedi: Sci. Tech. Weld Joi., 2013, vol. 44B, pp. 209-20.
3. X. Huang: Proceeding of ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Düsseldorf, Germany. 2014, pp. V006T22A001–V006T22A001.
4. 4.G. Hoppin and T.F. Berry: Weld. J., 1970, vol. 49, no. 11, p. 505.
5. J. Liburdi, P. Lowden, and K. Ellison: US 5156321, 1992.
6. N. Oiwa, S. Nishikiori, T. Wakabayashi, and J. Tsuji: US 8491837, 2013.
7. D. Nagy and X. Huang: J. Eng. Gas Turb. Power, 2009, 131:1–8.10.1115/1.2967496 ↗
8. 8.T. Henhoeffer, X. Huang, S. Yand, P. Au, and D Nagy: Mater. Sci. Tech., 2010, vol. 26, no. 4, pp. 431-9.10.1179/174328408X382217 ↗
9. W.D. Macdonald, and T.W. Eagar: Met. Sci. Joi., 1992, pp. 93–100.
10. M.G. Nicholas: Joining Processes, Kluwer Academic Publishers, MA, 1998, pp. 10–50.
11. Y. Hu: US 7731809, 2010.
12. N. Pietruska, B.K. Abriles, and J.F. Falkowski: US 8353444, 2013.
13. 13.Y. Zhou, W.F. Gale, and T.H. North: Mater. Rev., 1995, vol. 40, no. 5, pp. 181-96.10.1179/imr.1995.40.5.181 ↗
14. 14.D.S. Duvall, W.A. Owczarski, and D. Paulonis: Weld. J., 1974, vol. 54, no. 4, pp. 203-14.
15. N.C. Sheng, X. Hu, J. Liu, T. Jin, X.F. Sun, and Z.Q Hu: Metall. Mater. Trans. A, 2015, 46A: 1670–77.10.1007/s11661-014-2733-z ↗
16. 16.B. Abbasi-Khazaei, A. Jahanbakhsh, and R. Bakhtiari: Mater. Sci. Eng. A, 2016, vol. 651, pp. 93-101.10.1016/j.msea.2015.10.087 ↗
17. 17.B. Abbasi-Khazaei, G. Asghari, and R. Bakhtiari: Weld. J., 2016, vol. 95, pp. 68-76.
18. 18.R. Bakhtiari, A. Ekrami, and T.I. Khan: J. Mater. Eng. Perform., 2015, vol. 24, no. 4, pp. 1687-96.10.1007/s11665-015-1413-5 ↗
19. V. Jalilvand, H. Omidvar, H.R. Shakeri, M.R Rahimipour. Metall. Mater. Transb (2013) 44B: 1222-31.10.1007/s11663-013-9883-z ↗
20. 20.A.Y. Shamsabadi, R. Bakhtiari, and G.B. Eisaabadi: J. Alloys Comp., 2016, vol. 685, pp. 896-904.10.1016/j.jallcom.2016.06.185 ↗
21. 21.O.A. Idowu, O.A. Ojo, and M.C. Chaturvedi: Metall. Mater. Trans. A, 2006, vol. 37, no. 9, pp. 2787-96.10.1007/BF02586111 ↗
22. 22.R. Bakhtiari: J. Mater. Pro. Tech., 2016, vol. 231, pp. 8-17.10.1016/j.jmatprotec.2015.12.004 ↗
23. 23.M. Pouranvari: Mater. Sci. Tech., 2015, vol. 31, no. 14 pp. 1773-80.10.1179/1743284715Y.0000000005 ↗
24. 24.M. Pouranvari, A. Ekrami, and A.H. Ekrami: J. Alloys Compd., 2013, vol. 563, pp. 143-9.10.1016/j.jallcom.2013.02.100 ↗
25. 25.N. Sheng, J. Liu, T. Jin, X. Sun, and Z. Hu: J. Mater. Sci. Tech., 2015, vol. 31, no. 2, pp. 129-34.10.1016/j.jmst.2014.11.008 ↗
26. 26.J. Wei, Y. Ye, Z. Sun, L. Liu, and G. Zou: Appl. Sur. Sci., 2016, vol. 370, no. 1, pp. 364-72.10.1016/j.apsusc.2016.02.162 ↗
27. J. Brenneman: Master’s Thesis, University of Waterloo, 2011, pp. 20–30.
28. Y. Ye, J. Wei, G. Zou, W. Long, H. Bai, A. Wu, and L. Lei: Sci. Tech. Weld. Join., 2017.
29. 29.Y.H. Kim, I.H. Kim, and C.S. Kim: In Key Eng. Mater., 2005, vol. 297, pp. 2876-82.10.4028/www.scientific.net/KEM.297-300.2876 ↗
30. 30.R. Bakhtiari and A. Ekrami: Mater. Charact., 2012, vol. 66, pp. 38-45.10.1016/j.matchar.2012.02.002 ↗
31. 31.O.T. Ola, O.A. Ojo, and M.C. Chaturvedi: Philos. Mag., 2014, vol. 94, no. 29, pp. 3295-316.10.1080/14786435.2014.956838 ↗
32. 32.Y. Sun, J. Liu, B. Li, H. Li, and T. Jin: Mater. Res. Innov., 2014, vol. 18, no. S4, pp. 341-6.
33. 33.D. Zhang, W. Niu, X. Cao, and Z. Liu: Mater. Sci. Eng. A, 2015, vol. 644, pp. 32-40.10.1016/j.msea.2015.06.021 ↗
34. 34.M. Pouranvari, A. Ekrami, and A.H. Kokabi: Mater. Des., 2013, vol. 50, pp. 694-701.10.1016/j.matdes.2013.03.030 ↗