Influence of Ti and La Additions on the Formation of Intermetallic Compounds in the Al-Zn-Si Bath
Source abstract
Abstract
The effect of Ti and La additions on the formation of intermetallic compounds (IMCs) in the galvalume (55Al-Zn-1.6Si wt pct) bath was investigated experimentally and further studied with first-principles calculation. The studied baths contain: 1 wt pct Fe, with Ti content ranging from 0.05 to 0.15 wt pct and La content ranging from 0.05 to 0.30 wt pct. Combination of the experimental results with the thermodynamic analysis shows that the solubility of Fe in the alloy bath decreases with an increase of Ti content, which results in the formation of mass dross. Compared with the Ti-containing alloy, La promotes the formation of τ 5 phase (Fe2Al8Si). When both Ti and La are added, Fe4Al13, τ 5, τ 6 (β-Al4.5FeSi), TiAl3, and Ti2Al20La phases were observed. Since these IMCs would consume more Si in the bath, the decrease of Si content with Ti and La additions is more significant than that of the bath without these additions. Furthermore, the formation mechanism of Ti/TiAl3/Ti2La20La core–shell structure in the coating bath is proposed. This study has implications for strategic design of industry hot-dip production with exceptional mechanical properties of Al alloy coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. D. Phelan, B.J. Xu and R. Dippenaar: Mater. Sci. Eng. A, 2006, vol. 420, pp. 144–149.10.1016/j.msea.2006.01.085 ↗
2. G.X. Wu, J.Y. Zhang, Y.L. Ren, G.Y. Li, X.C Wu, Q. Li and K.C. Chou: Metall. Mater. Trans. A, 2012, vol. 43, pp. 2012–2017.10.1007/s11661-011-1037-9 ↗
3. G.X. Wu, J.Y. Zhang, Q. Li, K.C. Chou and X.C. Wu: Metall. Mater. Trans. B, 2011, vol. 43, pp. 198–205.
4. S.H. Hwang, J.H. Song and Y.S. Kim: Mater. Sci. Eng. A, 2005, vol. 390, pp. 437–443.10.1016/j.msea.2004.08.062 ↗
5. GH Awan, F ulHasan (2008) Mater. Sci. Eng. A 472:157–165.10.1016/j.msea.2007.03.013 ↗
6. J.H. Park, G.H. Park, D.J. Paik, Y. Huh and M.H. Hong: Metall. Mater. Trans. A, 2011, vol. 43, pp. 195–207.
7. A. Marder: Prog Mater Sci, 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
8. Z. Chen and J. See: ISIJ Int, 1993, vol. 33, pp. 307–312.10.2355/isijinternational.33.307 ↗
9. P. Perrot and G. Reumont: J. Phase Equilib, 1994, vol. 15, pp. 479–482.10.1007/BF02649398 ↗
10. S. Schürz, G.H. Luckeneder, M. Fleischanderl, P. Mack, H. Gsaller, A.C. Kneissl and G. Mori: Corros. Sci, 2010, vol. 52, pp. 3271–3279.10.1016/j.corsci.2010.05.044 ↗
11. Z. Chen, C.T. Peng, Q. Liu, R. Smith and D. Nolan: J. Alloys Compd, 2014, vol. 589, pp. 226–229.10.1016/j.jallcom.2013.11.216 ↗
12. H. Peng, X. Su, Z. Li, J. Wang, C. Wu, H. Tu and X. Lai: Surf. Coat. Technol, 2012, vol. 206, pp. 4329–4334.10.1016/j.surfcoat.2012.01.048 ↗
13. N.G. Cho: U.S. Patents 5,571,566A, 1996.
14. D. Yang, J. Chen, Q. Han and K. Liu: J. Rare Earths, 2009, vol. 27, pp. 114–118.10.1016/S1002-0721(08)60203-3 ↗
15. X.F. Lai, H.P. Peng, J.H. Wang, C.J. Wu, H. Tu, Y. Liu and X.P. Su: Surf Eng, 2013, vol. 29, pp. 390–395.10.1179/1743294413Y.0000000128 ↗
16. E.T. McDevitt, F.J. Friedersdorf, and H.G. Rommal: U.S. Patent 7,238,430B2, 2007.
17. F. García, A. Salinas and E. Nava: Mater. Lett, 2006, vol. 60, pp. 775–778.10.1016/j.matlet.2005.10.010 ↗
18. X.G. Chen and M. Fortier: J. Mater. Process. Technol, 2010, vol. 210, pp. 1780–1786.10.1016/j.jmatprotec.2010.06.009 ↗
19. T.X. Guo, C.S. Liu and Y.L. Zhou: Manufacturing and Engineering Technology (ICMET 2014), p. 283, CRC Press, San-ya, China, 2014.
20. P. Hou, Z. Shui, G. Chuang and J. Stringer: J Electrochem Soc, 1992, vol. 139, pp. 1119–1126.10.1149/1.2069350 ↗
21. L.V. Ramanathan, M.F. Pillis and S.M.C. Fernandes: J Mater Sci, 2008, vol. 43, pp. 530–535.10.1007/s10853-007-1855-8 ↗
22. P.J. Sippola: European Patent 1,068,369B1, 2005.10.1088/1126-6708/2005/09/068 ↗
23. A. Michalcova, D. Vojtech and P. Novak: Micron, 2013, vol. 45, pp. 55–58.10.1016/j.micron.2012.10.013 ↗
24. S.J. Clark, M.D. Segall, C.J. Pickard, P.J. Hasnip, M.I. Probert, K. Refson and M.C. Payne: Z Kristallogr, 2005, vol. 220, pp. 567–570.10.1524/zkri.220.5.567.65075 ↗
25. J.P. Perdew, K. Burke and M. Ernzerhof: Phys Rev Lett, 1996, vol. 77, p. 3865.10.1103/PhysRevLett.77.3865 ↗
26. J.P. Perdew and A. Zunger: Phys Rev B, 1981, vol. 23, pp. 5048–5079.10.1103/PhysRevB.23.5048 ↗
27. D. Vanderbilt: Phys Rev B, 1990, vol. 41, pp. 7892–7895.10.1103/PhysRevB.41.7892 ↗
28. L. Bellaiche and D. Vanderbilt: Phys Rev B, 2000, vol. 61, pp. 7877–7882.10.1103/PhysRevB.61.7877 ↗
29. S. Shawki and Z.A. Hamid: Surf Interface Anal, 2003, vol. 35, pp. 943–947.10.1002/sia.1608 ↗
30. Q. Luo, F. Jin, Q. Li, J.Y. Zhang and K.C. Chou: J. Manuf. Sci. Prod, 2013, vol. 13, pp. 85–89.
31. Z. Li, C. Liao, Y. Liu, X. Wang, Y. Wu, M. Zhao, Z. Long and F. Yin: J Phase Equilib Diff, 2014, vol. 35, pp. 564–574.10.1007/s11669-014-0325-7 ↗
32. T. Gao, P. Li, Y. Li and X. Liu: J. Alloys Compd, 2011, vol. 509, pp. 8013–8017.10.1016/j.jallcom.2011.05.032 ↗
33. K. Honda, K. Ushioda, W. Yamada, K. Tanaka and H. Hatanaka: Mater Trans, 2008, vol. 49, pp. 1401–1409.10.2320/matertrans.MRA2008010 ↗
34. P. Cooper, A. Hardman and E. Burhop: TMS Light Metals 2003, p. 923, Minerals, Metals and Materials Society, Warrendale, PA, 2003.
35. M. Easton and D. Stjohn: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1613–1623.10.1007/s11661-999-0098-5 ↗
36. E.T. Mcdevitt: U.S. Patent 7,413,769B2, 2008.10.5771/9780810863897-413 ↗
37. Q. Luo, J.L. Chen, Y. Li, F. Yang, Q. Li, Y. Wu, J.Y. Zhang and K.C. Chou: Calphad, 2012, vol. 37, pp. 116–125.10.1016/j.calphad.2012.02.007 ↗
38. Q. Luo, Q. Li, F. Jin, J.Y. Zhang, X.B. Yu, Q.F. Gu and K.C. Chou: Intermetallics, 2012, vol. 26, pp. 136–141.10.1016/j.intermet.2012.02.020 ↗
39. Q. Luo, Q. Li, J.Y. Zhang, S.L. Chen and K.C. Chou: Intermetallics, 2013, vol. 33, pp. 73–80.10.1016/j.intermet.2012.09.027 ↗
40. Q. Luo, Q. Li, J.Y. Zhang, S.L. Chen and K.C. Chou: J. Alloys Compd, 2014, vol. 602, pp. 58–65.10.1016/j.jallcom.2014.02.107 ↗
41. H. Zhao, Y. Song, M. Li and S. Guan: J. Alloys Compd, 2010, vol. 508, pp. 206–211.10.1016/j.jallcom.2010.08.047 ↗
42. K. Wang, C. Cui, Q. Wang, S. Liu and C. Gu: Mater Lett, 2012, vol. 85, pp. 153–156.10.1016/j.matlet.2012.06.072 ↗
43. B.L. Bramfitt: Metall. Trans, 1970, vol. 1, pp. 1987–1995.10.1007/BF02642799 ↗
44. Z. Fan, Y. Wang, Y. Zhang, T. Qin, X.R. Zhou, G.E. Thompson, T. Pennycook and T. Hashimoto: Acta Materialia, 2015, vol. 84, pp. 292–304.10.1016/j.actamat.2014.10.055 ↗
45. J. Mendala: IOP Conf. Series: Mater. Sci. Eng., 2011, vol. 22, pp. 1–7.