journal article·2016-05Open access

The Influence of Ni and V Trace Elements on High-Temperature Tensile Properties and Aging of A356 Aluminum Foundry Alloy

Maria Teresa Di Giovanni, Emanuela Cerri, Daniele Casari, MATTIA Merlin, LARS Arnberg, Gian Luca Garagnani

Abstract

High-temperature tensile properties of unmodified A356 alloy with and without the addition of Ni or V in traces (600 and 1000 ppm of Ni and V, respectively) were investigated by analyzing samples obtained from sand and permanent mold castings in the as-cast and T6 heat-treated conditions. Tensile tests were performed at 508 K (235 °C) at a crosshead speed of 1 mm/min. In addition, samples were subjected to artificial aging at 508 K (235 °C) for different times, and corresponding hardness curves were plotted. Microstructures and fracture surfaces, analyzed by FEG-SEM equipped with energy dispersive X-ray spectroscopy, showed that neither Ni nor V addition had a detrimental effect on high-temperature tensile properties. Aging curves showed a strong loss of hardness affecting the T6 class between 30-min and 1-h exposure time. After 6-h aging, no evidence of aging treatment persisted on hardness of the tested material. Hardness values did not reveal any significant difference between the reference alloy and the Ni- and V-containing alloys in both casting conditions, in complete analogy with the tensile properties. Unmodified eutectic silicon particles provided inhomogeneity in the α-Al matrix and acted as the principal source of stress concentration leading to fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. W. Kasprzak, D. Emadi, M. Sahoo, M. Aniolek, Mater. Sci. Forum, 2009, vols. 618-619, pp. 595-600.10.4028/www.scientific.net/MSF.618-619.595 ↗
2. R. Dhingra, S. Das., J Clean. Prod., 2014, vol. 85, pp. 347-358.10.1016/j.jclepro.2014.08.107 ↗
3. W. Kasprzak, Z. Deng, J. Powell, M. Niewczas: JILM, 2010, pp. 669–74
4. R. Molina, P. Amalberto, M. Rosso, Met. Sc. & Tech., 2011, vol 29-1, pp. 5-15.
5. R. Molina, P. Amalberto, M. Rosso, Met. Sc. & Tech., 2011, vol 29-2, pp. 5-13.
6. Z. Asghar, G. Requena, F. Kubel, Mater. Sci. Eng. A, 527 (2010), pp. 5691-5698.10.1016/j.msea.2010.05.033 ↗
7. Y. Li, Y. Yang, Y. Wu, L. Wang, X. Liu, Mater. Sci. Eng. A, 527 (2010), pp. 7132-7137.10.1016/j.msea.2010.07.073 ↗
8. G. Jha, S. Ningileri, X. Li, R. Bowers, B. Sadler (eds.), Light Metals, Wiley, New Jersey, 2013, pp. 929–34.10.1002/9781118663189.ch158 ↗
9. J. Grandfield and J. Taylor, Mater. Sci. Forum, 2009, vol 630, pp.129-136.10.4028/www.scientific.net/MSF.630.129 ↗
10. D. Casari,T.H. Ludwig, L. Arnberg, M. Merlin and G.L. Garagnani, Mat. Sci. Eng. A, 2014, vol. 610, pp. 414-426.10.1016/j.msea.2014.05.059 ↗
11. D. Dispinar and J. Campbell, Mat. Sci. Eng. A, 2011, vol. 528, pp. 3860-3865.10.1016/j.msea.2011.01.084 ↗
12. G.E. Dieter, Mechanical Metallurgy, 3rd ed., Mc Graw-Hill Book Co., New York 1986, pp. 188-228.
13. Q.G. Wang, Metall. Mater .Trans. A, 2003, vol 34, pp. 2887-2899.10.1007/s11661-003-0189-7 ↗
14. S. G. Shabestari, F. Shahri, J. Mater. Sci., 2004, vol 39, pp. 2023-2032.10.1023/B:JMSC.0000017764.20609.0d ↗
15. Q. G. Wang, C.H. Casaeres, J. R. Grifhits, Metall. Trans. A, 2003, vol 34, pp. 2901-2912.10.1007/s11661-003-0190-1 ↗
16. I. Fadavi, A. Boostani, S. Tamanthas, J. Alloys Compd, 2009, vol 481(1−2), pp. 220-227.10.1016/j.jallcom.2009.03.050 ↗
17. I. Sinclair and P.J. Gregson, Mater. Sci. Techonol., 1997, vol 13, pp 709-72610.1179/mst.1997.13.9.709 ↗
18. M. Huang and Z. Li, Int. J. Solid. Struct., 2009, vol. 43, pp. 634-641.
19. B. Baradarani, R. Raiszadeh, Mater. Des., 2011, vol. 32, pp. 935-940.10.1016/j.matdes.2010.08.006 ↗
20. P.A Rometsch and G.B Schaffer, Mat. Sci. and Eng. A, 2002, vol. 325, pp. 424-434.10.1016/S0921-5093(01)01479-4 ↗
21. Metals Handbook, 2 Edn, Heat Treating of Nonferrous Alloys, 1998, p. 1035.