Effects of Heating Rate on Microstructure and Fracture Toughness of Railway Wheel Steel
Source abstract
Abstract
The microstructure and fracture toughness KIC (or KQ) of railway wheel steel with 0.53 wt pct C were studied under various heating rates. The effects of the heating rate on the grain size and the relation between the grain size and the fracture toughness were discussed. The results show that rapid heating not only refines the grains but can also result in more homogeneous grains. The cleavage fracture toughness strongly relates to the grains with larger size. It can be observed that under different heating rates, the fracture toughness KQ increases with decreasing average diameter of the top 5 pct grains D5. KQ (MPa m1/2) = 194.3–29.8 ln(D5) when D5 is in the range of 30 to 73 μm. This result can be interpreted by the cleavage fracture critical event, which is grain-sized crack propagation controlled.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. T. Oda and R. Yanagimoto: Heat Treatment of steel, p. 8, Iron steel Inst. Jap., Tokyo, Maruzen, 1969.
2. N. C. Law and D. V. Edmonds: Metall. Trans. A, 1980, vol. 11, pp. 33-46.10.1007/BF02700436 ↗
3. H.A. Richard, M. Fulland, M. Sander, and G. Kullmer: Eng. Fail. Anal., 2005, vol.12,pp. 986-99.10.1016/j.engfailanal.2004.12.016 ↗
4. M.R. Zhang and H.C. Gu: Eng. Frac. Mech., 2008, vol.75, pp. 5113-21.10.1016/j.engfracmech.2008.07.007 ↗
5. F. B. Pickering: Constitution and properties of steels, p. 436, Weinheim, New York, Basel, Cambridge, VCH, 1992.
6. T. N. Baker: Yield, flow and fracture of polycrystals. p. 156, Elsevier Applied Science Publishers, London, 1983.
7. T. Gladman, I. D. McIvor, and F. B. Pickering: J. Iron Steel Inst. London, 1972, vol.210, pp. 916-30.
8. M. Dollar, I. M. Berstein, and A. W. Thompson: Acta Met., 1988, vol.36, pp. 311-20.10.1016/0001-6160(88)90008-9 ↗
9. S. Lee, L. Majno, and R.J. Asaro: Metall. Trans. A, 1985, vol.16, pp. 1633-48.10.1007/BF02663019 ↗
10. S. K. Chaudhuri and R. Brook: Inter. Jour. Frac., 1976, vol.12, pp. 101-06.10.1007/BF00036013 ↗
11. I. Souki, D. Delagnes, and P. Lours: Procedia Eng., 2011, vol.10, pp. 631-37.10.1016/j.proeng.2011.04.105 ↗
12. M.T. Miglin, J. P. Hirth and A. R. Rossenfield: Metall. Trans. A, 1983, vol.14, pp. 2055-61.10.1007/BF02662372 ↗
13. N. Sarafianos: Metall. Mater. Trans. A, 1997, vol. 28, pp. 2089-99.10.1007/s11661-997-0166-7 ↗
14. A.V. Samant and J.J. Lewadowski: Metall. Mater. Trans. A, 1997, vol. 28, pp. 2297-307.10.1007/s11661-997-0187-2 ↗
15. [15] T. Kawabata and O. Izumi: J. Mater. Sci., 1978, vol. 13, pp. 945-50.10.1007/BF00544689 ↗
16. D. Townsend and J. E. Field: J. Mater. Sci., 1990, vol. 25, pp. 1347-52.10.1007/BF00585448 ↗
17. Z. Y. Fan: Mater. Sci. Eng. A, 1995, vol. 191, pp. 73-83.10.1016/0921-5093(94)09621-3 ↗
18. D. J. Alexander and I. M. Bernstein: Metall. Trans. A, 1989, vol. 20, pp. 2321-35.10.1007/BF02666667 ↗
19. G. Z.Wang and J. H. Chen: Inter. Jour. Frac., 2001, vol. 108, pp. 235-50.10.1023/A:1011033208335 ↗
20. J. H. Chen, G. Z. Wang, C. Yan, H. Ma, and L. Zhu: Inter. J. Frac., 1997, vol.83, pp. 105-20.10.1023/A:1007306932437 ↗
21. A. S. Kumara, B. R. Kumar, G. L. Dattac and V. R. Ranganath: Mater. Sci. Eng. A, 2010, vol. 527, pp. 954-60.10.1016/j.msea.2009.09.027 ↗
22. H. Sakamoto, K. Toyama and K. Hirakawa: Mater. Sci. Eng. A, 2000, vol. 285, pp. 288-92.10.1016/S0921-5093(00)00648-1 ↗
23. A. F. Vicente, M. Carsi, F. Penalba, E. Taleff and O. A. Ruano: Mater. Sci. Eng. A, 2002, vol. 335, pp. 175-185.10.1016/S0921-5093(01)01916-5 ↗
24. [24] S. Gong, X. C. Ren, Y. X. Ma, K. W. Gao, B. Jiang, G. Chen, H. Zhao: Trans. Mater. Heat Treat., 2015, vol. 36(4), pp.150-155.
25. A. A. Griffith: Phil. Trans. R. Soc. London, 1920, Vol. 221A, pp. 163-198.
26. G. R. Irwin: J. Appl. Mech., 1957, Vol. 24, pp. 361-364.10.1115/1.4011547 ↗
27. J. H. Chen, Q. Wang, G. Z. Wang and Z. Li: Acta Mater., 2003, vol.51, pp.1841-55.10.1016/S1359-6454(02)00581-5 ↗
28. R. A. Grange: Metall. Trans., 1971, vol.2, pp. 65-78.10.1007/BF02662639 ↗
29. [29]O. S. Vilyams, N. M. Bolshova and M. Y. Koval: Metall. Sci. Heat Treat., 1966, vol.7, pp. 817-20.10.1007/BF00666974 ↗
30. S. Primig, H. Leitner, W. Knabl, A. Lorich, H. Clemens and R. Stickler: Mater. Sci. Eng. A, 2012, vol. 535, pp. 316-24.10.1016/j.msea.2011.12.099 ↗
31. J. Wang, J. Li, X. F. Wang, J. J. Tian, C. H. Zhang and S. G. Zhang, J. Iron Steel Res. Int., 2010, vol. 17, pp. 54-61.10.1016/S1006-706X(10)60170-7 ↗
32. F.G. Caballero, C. Capdevila and C. Garcia de Andres: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1283-91.10.1007/s11661-001-0218-3 ↗
33. D. Martin, Y. Palizdar, C. Garcia-Mateo, R.C. Cochrane, R. Brydson, A.J. Scott, Metall. Mater. Trans. A, 2011, vol. 42, pp. 2591-608.10.1007/s11661-011-0692-1 ↗