Effect of Cu Addition to Zn-12Al Alloy on Thermal Properties and Wettability on Cu and Al Substrates
Source abstract
Abstract
Abstract The thermal properties, electrical resistivity, thermal linear expansion and tensile strength of a new high-temperature lead-free solder based on a eutectic Zn-Al alloy with 0.5, 1.0, or 1.5 at. pct Cu added were studied. Wettability studies on Cu substrate were performed with flux at 773 K (500 °C) for 60, 180, 240, 900, 1800, and 3600 seconds, and for 480 seconds at 733 K, 753 K, 773 K, 793 K, and 823 K (460 °C, 480 °C, 500 °C, 520 °C, and 550 °C, respectively). The experiment was designed to demonstrate the effect of the addition of Cu on the kinetics of the formation and growth of the CuZn, Cu5Zn8, CuZn4, and Al4Cu9 phases, which were identified by X-ray diffraction analysis. Wetting tests were also performed on the Al substrate, for 15 and 30 seconds at 773 K and 793 K (500 °C and 520 °C, respectively). Very low contact angles on Al pads were obtained. The electrical resistivity of Zn-Al-Cu alloys was slightly higher than that of the ZnAl eutectic alloy. The present results are discussed with respect to the available literature on Zn-Al and Zn-Al-Cu alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Vianco P.T., Rejent R.A., J. Elect. Mater. 28 (1999) 1127.10.1007/s11664-999-0250-4 ↗
2. X.J. Liu, Y. Inohana, I. Ohnuma, R. Kainuma, K. Ishida, Z. Moser, W. Gąsior, J. Pstruś, J. Elect. Mater. 31 (2002) 1139.10.1007/s11664-002-0003-0 ↗
3. J. Glazer, Int. Mater. Rev. 40 (1995) 65.10.1179/imr.1995.40.2.65 ↗
4. T. Gancarz, Z. Moser, W. Gasior, J.Pstrus, H. Henein, Int. J Thermophys.32 (2011) 1210–1233.10.1007/s10765-011-1011-1 ↗
5. M.McCormack, S. Jin, J.Electron. Mater. 23 (1994) 635.10.1007/BF02653349 ↗
6. T. Gancarz, J. Pstruś, P. Fima, S. Mosińska, J. Alloy Compd. 582(2014) 313-322.10.1016/j.jallcom.2013.08.055 ↗
7. T. Gancarz, J. Pstruś, P. Fima, S. Mosińska, J. Mater. Eng. Perform. 21 (2012) 599-605.10.1007/s11665-012-0146-y ↗
8. M. Rettenmayer, P. Lambracht, B. Kempf and C. Tschudin: J. Electron. Mater. 31 (2002) 279–285.
9. T. Shimizu, H. Ishikawa, I. Ohnuma and K. Ishida: J. Electron. Mater. 28 (1999) 1172–1174.10.1007/s11664-999-0153-4 ↗
10. P. T. Vianco, Weld. J.81 (2002) 51-54.
11. Y. Takaku, L. Felicia, I. Ohnuma, R. Kainuma, K. Ishida, J. Electron. Mater. 37 (2008) 314-323.10.1007/s11664-007-0344-9 ↗
12. N. Kang, H-S. Na, S-J. Kim, C-Y. Kang, J. Alloy Compd. 467 (2009) 246–250.10.1016/j.jallcom.2007.12.048 ↗
13. T. Savaskan, M.S. Turhal, Mater.Charact. 51 (2003) 259– 270.10.1016/j.matchar.2003.12.003 ↗
14. J. Pstruś, P. Fima, T. Gancarz, J. Mater. Eng. Perform. 21 (2012) 606-613.10.1007/s11665-012-0174-7 ↗
15. J. Pstrus, T. Gancarz, J. Mater. Eng. Perform. 23 (2014) 1614-1624.10.1007/s11665-014-0942-7 ↗
16. T. Gancarz and J. Pstruś: J. Alloy Compd., 2015, vol. 647, pp. 844–56.10.1016/j.jallcom.2015.06.122 ↗
17. V. Raghavan, J. Phase Equilib. Diff. 28 (2007) 183–188.10.1007/s11669-007-9025-x ↗
18. T.Gancarz, P. Fima,J. Pstruś, J. Mater. Eng. Perform. 23(2014) 1524-1529.10.1007/s11665-013-0825-3 ↗
19. T. Savaskan, A.Hekimoglu, Mater.Sci.Eng.A603(2014)52–57.10.1016/j.msea.2014.02.047 ↗
20. R.J. Klein-Wassink, Soldering in Electronics, 2nd ed., Electrochemical Publications, Ayr, Scotland, 1984.