Effects of carbides on fatigue characteristics of austempered ductile iron
Source abstract
Abstract
Crack initiation and growth behavior of an austempered ductile iron (ADI) austenitized at 800 °C and austempered at 260 °C have been assessed under three-point bend fatigue conditions. Initiation sites have been identified as carbides remaining from the as-cast ductile iron due to insufficient austenization. The number of carbides cracking on loading to stresses greater than 275 MPa is critical in determining the failure mechanism. In general, high carbide area fractions promote coalescence-dominated fatigue crack failure, while low area fractions promote propagation-dominated fatigue crack failure. Individual carbides have been characterized using finite body tessellation (FBT) and adaptive numerical modeling (Support vector Parsimonious Analysis Of Variance (SUPANOVA)) techniques in an attempt to quantify the factors promoting carbide fracture. This indicated that large or long and thin carbides on the whole appear to be susceptible to fracture, and carbides that are locally clustered and aligned perpendicular to the tensile axis are particularly susceptible to fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. J.F. Janowak and R.B. Gundlach: J. Heat Treating, 1985, vol. 4, pp. 25–31.10.1007/BF02835486 ↗
2. C.K. Lin and T.P. Hung: Int. J. Fatigue, 1996, vol. 18, pp. 297–307.10.1016/0142-1123(96)82895-7 ↗
3. C.K. Lin and T.P. Hung: Int. J. Fatigue, 1996, vol. 18, pp. 309–20.10.1016/0142-1123(95)00108-5 ↗
4. D.A. Hills and D. Nowell: Fretting Fatigue ESIS 18, Mechanical Engineering Publications, London, 1994.
5. P.A.S. Reed, M. Joyce, N. Hide, and J. Boselli: Report to Federal Mogul, University of Southampton, Southampton, United Kingdom, 1998.
6. R.P. Hockley, D. Thakar, J. Boselli, I. Sinclair, and P.A.S. Reed: in Small Fatigue Cracks: Mechanics, Mechanisms and Applications, R.K.S. Ravichandran, R. Ritchie, and Y. Murakami, eds., Elsevier, New York, NY, 1999, pp. 49–56.
7. P.A.S. Reed, R.C. Thomson, S. James, D.C. Putman, K.K. Lee, and S.R. Gunn: Mater. Sci. Eng., 2003, vol. A346, pp. 273–86.10.1016/S0921-5093(02)00545-2 ↗
8. P.M. Scott and T.W. Thorpe: Fatigue Eng. Mater. Struct., 1981, vol. 4, pp. 291–309.10.1111/j.1460-2695.1981.tb01127.x ↗
9. J. Boselli, I. Sinclair, P.J. Gregson, and P.D. Pitcher: Scripta Mater., 1997, vol. 38, pp. 839–44.10.1016/S1359-6462(97)00533-2 ↗
10. N. Yang, J. Boselli, P.J. Gregson, and I. Sinclair: Mater. Sci. Technol., 2000, vol. 16, pp. 797–805.10.1179/026708300101508469 ↗
11. O.P. Femminella, M.J. Starink, S.R. Gunn, C.J. Harris, and P.A.S. Reed: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1255–60.10.4028/www.scientific.net/MSF.331-337.1255 ↗
12. S. Gunn and M. Brown: Proc. IEEE Int. Workshop on Neural Networks for Signal Processing, Madison, WI, 1999.
13. M.C. Mwanza, M.R. Joyce, K.K. Lee, S. Syngellakis, and P.A.S. Reed: Int. J. Fatigue, 2003, vol. 25, pp. 1135–45.10.1016/S0142-1123(03)00148-8 ↗
14. V. Vapnik: The Nature of Statistical Learning Theory, Springer-Verlag, Berlin, 1995.10.1007/978-1-4757-2440-0 ↗
15. R.C. Thomson, J.S. James, and D.C. Putman: Mater. Sci. Eng. A, 2003, vol. 36, pp. 273–86.
16. B. Stokes: Ph.D. Thesis, University of Southampton, Southampton, United Kingdom, 2003.
17. S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, United Kingdom, 1998.10.1017/CBO9780511806575 ↗
18. K.K. Lee, C.J. Harris, S.R. Gunn, and P.A.S. Reed: Proc. IJCNN, Washington, DC, IEEE, New York, 2001, pp. 2410–15.
19. T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, UK, 1995.
20. P.J. Withers, W.M. Stobbs, and O.B. Pedersen: Acta Metall., 1989, vol. 37, pp. 3061–84.10.1016/0001-6160(89)90341-6 ↗
21. Cast Irons-ASM Specialty Handbook, The Materials Information Society, OH, 1996.
22. H. Mizubayashi, J.J. Li, H. Yumoto, and M. Shimotomai: Scripta Mater., 1999, vol. 40, pp. 773–77.10.1016/S1359-6462(99)00003-2 ↗
23. M. Umenoto, Z.G. Liu, K. Masuyama, and K. Tsuchiya: Scripta Mater., 2001, vol. 45, pp. 391–97.10.1016/S1359-6462(01)01016-8 ↗
24. N. Kamaya and N. Totsuka: Corr. Sci., 2002, vol. 44, pp. 2333–52.10.1016/S0010-938X(02)00039-2 ↗
25. G.L. Greno, J.L. Otegui, and R.E. Boeri: Int. J. Fatigue, 1999, vol. 21, pp. 35–43.10.1016/S0142-1123(98)00055-3 ↗
26. J. Ortiz, A.P. Cisilino, and J.L. Otegui: Fatigue Fracture Eng. Mater. Struct., 2001, vol. 24, pp. 591–605.10.1046/j.1460-2695.2001.00429.x ↗
27. W.O. Soboyejo and J.F. Knott: Fatigue Fracture Eng. Mater., 1991, vol. 14, pp. 37–49.10.1111/j.1460-2695.1991.tb00641.x ↗
28. C. Bayley, G. Glinka, and J. Porter: Int. J. Fatigue, 2000, vol. 22, pp. 799–808.10.1016/S0142-1123(00)00047-5 ↗
29. N. Gao, M.W. Brown, and K.J. Miller: Fatigue Fracture Eng. Mater. Struct., 1995, vol. 18, pp. 1407–22.10.1111/j.1460-2695.1995.tb00865.x ↗
30. N. Gao, M.W. Brown, and K.J. Miller: Fatigue Fracture Eng. Mater. Struct., 1995, vol. 18, pp. 1423–41.10.1111/j.1460-2695.1995.tb00866.x ↗
31. J. Stolarz: Mater. Sci. Eng., 1977, vols. A234–A236, pp. 861–64.