Analysis of the Coupling Effects of TiB Whiskers and TiC Particles on the Fracture Toughness of (TiB + TiC)/TC4 Composites: Experiment and Modeling
Source abstract
Abstract
(TiB + TiC)/TC4 composites reinforced with different amounts of TiB whiskers and TiC particles are produced by common casting and hot forging technology. Then the fracture toughness of (TiB + TiC)/TC4 composites is analyzed by experiment and modeling. The experimental results indicate that not only reinforcement volume fraction but also the mole ratio between TiB whiskers and TiC particles can influence the fracture toughness of (TiB + TiC)/TC4 composites. Microstructure observations are carried out to examine the behavior of TiB whiskers and TiC particles in the fracture process. An analytical expression for predicting the fracture toughness of (TiB + TiC)/TC4 composites is built up. In particular, the coupling influences of TiB whiskers and TiC particles on the elastic modulus, yield strength, and fracture strain of TMCs are revealed in the modeling process. The results indicate that when TiB and TiC particles are coexisting in the TMCs, the fracture toughness of (TiB + TiC)/TC4 composites increases with the increase of the TiB whiskers aspect ratio, TiC particles volume fraction and size; however, with the increase of TiB whiskers volume fraction, the fracture toughness decreases. The breakage of TiB whiskers is the main reason for the fracture of TMCs. The acting mechanism of TiC particles on the fracture of TMCs transfers from blocking crack propagation and interfacial debonding to breakage with the increase of size, which can decrease the fracture toughness of (TiB + TiC)/TC4 composites. Considering the broken fraction of TiB whiskers, the fracture toughness of (TiB + TiC)/TC4 composites can be reasonably predicted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Lei Wang, Mitsuo Niinomi, Shiro Takahashi, Masao Hagiwara, Satoru Emura, Yoshkuni Kawabei, and Sung-Joon Kim: Mater. Sci. Eng. A, 1999, vol. 263, pp. 319–25.10.1016/S0921-5093(98)01163-0 ↗
2. V.K. Chandravanshi, A. Bhattacharjee, S.V. Kamat, and T.K. Nandy: J. Alloys Compd., 2014, vol. 589, pp. 336–45.10.1016/j.jallcom.2013.11.014 ↗
3. Kartik Prasad, Rajdeep Sarkar, S.V. Kamat, and T.K. Nandy: Mater. Sci. Eng. A, 2011, vol. 529, pp. 74–80.10.1016/j.msea.2011.08.062 ↗
4. H. Choe, S. Abkowitz, S.M. Abkowitz, and D.C. Dunand: Mater. Sci. Eng. A, 2008, vol. 485, pp. 703–10.10.1016/j.msea.2008.01.069 ↗
5. Antonio A.M. da Silva, J.F. dos Santos, and T.R. Strohaecker: Compos. Sci. Technol., 2005, vol. 65, pp. 1749–55.10.1016/j.compscitech.2005.03.005 ↗
6. D.R. Ni, L. Geng, J. Zhang and Z.Z. Zheng: Scripta Mater., 2006, vol. 55, pp. 429–32.10.1016/j.scriptamat.2006.05.024 ↗
7. H. Rastegari, and S.M. Abbasi: Mater. Sci. Eng. A, 2013, vol. 564, pp. 473–77.10.1016/j.msea.2012.12.011 ↗
8. Ma ZY, Tjong SC, and Gen L: Scripta Mater., 2000, vol. 42, pp. 367–73.10.1016/S1359-6462(99)00354-1 ↗
9. W.J. Lu, D. Zhang, X.N. Zhang, R.J. Wu, T. Sakata, and H. Mori: Mater. Sci. Eng. A, 2001, vol. 311, pp. 142–50.10.1016/S0921-5093(01)00910-8 ↗
10. X.N. Zhang, W.J. Lu, D. Zhang, and R.J. Wu: Scripta Mater., 1999, Vol. 41, pp. 39–46.10.1016/S1359-6462(99)00087-1 ↗
11. K. Srinivasa Vadayarar, S. Devaki Rani, and V.V. Bhanu Prasad: Procedia Materials Science, 2014, vol. 6, pp. 1329–35.10.1016/j.mspro.2014.07.111 ↗
12. B.G. Park, A.G. Crosky, and A.K. Hellier: Composites: Part B, 2008, vol. 39, pp. 1270–1279.10.1016/j.compositesb.2008.01.005 ↗
13. G. Lütjering: Mater. Sci. Eng. A, 1998, vol. 243, pp. 32–45.10.1016/S0921-5093(97)00778-8 ↗
14. Minmin Wang, Weijie Lu, Jining Qin, Fengcang Ma, Junqiang Lu, and Di Zhang: Mater. Des., 2006, vol. 27, pp. 494–98.10.1016/j.matdes.2004.11.030 ↗
15. S.C. Tjong, Y.W. Mai (2008) Compos. Sci. Technol., vol. 68, pp. 583–601.
16. G.G. Garrett, and J.F. Knott: Metall. Trans. A, 1978, vol. 9, pp. 1187–1201.10.1007/BF02652242 ↗
17. Garcı´a E.J, Hart A.J, Wardle B.L, Slocum A.H (2007) Adv. Mater. 19:2151–56.10.1002/adma.200700237 ↗
18. Nardone VC, and Prewo KM: Scripta Mater., 1986, vol. 20, pp. 43–48.10.1016/0036-9748(86)90210-3 ↗
19. Nordone VC: Scripta Mater., 1987, vol.21, pp.1313-1318.10.1016/0036-9748(87)90105-0 ↗
20. Fukuda Hiroshi, and Chou Tsu-wei: J Mater Sci, 1982, vol. 17, pp. 1003–11.10.1007/BF00543519 ↗
21. Shi N, Wilner B, and Arsenault RJ: Acta Metall Mater, 1992, vol. 40, pp. 2841–54.10.1016/0956-7151(92)90449-O ↗
22. Ramakrishnan N:Acta Mater., 1996, vol. 44, pp. 69–77.10.1016/1359-6454(95)00150-9 ↗
23. Zhang Q, and Chen DL: Scripta Mater., 2004, vol. 51, pp. 863–67.10.1016/j.scriptamat.2004.07.006 ↗
24. S. Scudino, G. Liu, K.G. Prashanth, B. Bartusch, K.B. Surreddi, B.S. Murty, and J. Eckert: Acta Mater., 2009, vol. 57, pp. 2029–39.10.1016/j.actamat.2009.01.010 ↗
25. Miller WS, and Humphreys FJ: Scripta Metall. Mater., 1991, vol. 25, pp. 33–38.10.1016/0956-716X(91)90349-6 ↗
26. Hansen N: Acta Metall Mater, 1977, vol. 25, pp. 863–69.10.1016/0001-6160(77)90171-7 ↗
27. Arsenault RJ, Wang L, and Feng CR: Acta Metall. Mater, 1991, vol. 39, pp. 47–57.10.1016/0956-7151(91)90327-W ↗
28. Brown LM, and Stobbs WM: Phil. Mag., 1976, vol. 34, pp. 351–72.10.1080/14786437608222028 ↗
29. Hahn GT, Rosenfield AR (1968) ASTM STP, 432:5–32.
30. K. S. CHAN: Acta Metal. Mater., 1995, vol. 43, pp. 4325–35.10.1016/0956-7151(95)00133-G ↗
31. G. LIU, G.J. ZHANG, X.D. DING, J. SUN, and K.H. CHEN: Metall. Trans. A, 2004, vol. 35A, pp. 725–1734.
32. M.F. Ashby: Phil. Mag., 1970, vol.21, pp.399-424.10.1080/14786437008238426 ↗
33. Ping Guo, Yongqing Zhao, Weidong Zeng, and Quan Hong: Mater. Sci. Eng. A, 2013, vol. 563, pp. 106–11.10.1016/j.msea.2012.11.033 ↗
34. K. H. Oh, and K. S. Han: Compos. Sci. Technol., 2007, vol. 67, pp. 1719–26.10.1016/j.compscitech.2006.06.020 ↗
35. K.K. Alaneme, and A.O. Aluko, Scientia Iranica A, 2012, vol. 19(4), pp. 992–96.10.1016/j.scient.2012.06.001 ↗
36. Min Song, and Baiyun Huang: Mater. Sci. Eng. A, 2008, vol. 488, pp. 601–607.10.1016/j.msea.2008.03.022 ↗
37. Min Song, and Daihong Xiao: Mater. Sci. Eng. A, 2008, vol. 474, pp. 371–75.10.1016/j.msea.2007.05.075 ↗
38. Fengcang Ma, Weijie Lu, Jining Qin, and Di Zhang: Mater. Trans., 2006, vol. 47, pp. 1–5.
39. J.B. Fruhaufa, J. Roger, O. Dezellus, S. Gourdet, N. Karnatak, N. Peillon, S. Saunier, F. Montheillet, and C. Desrayaud: Mater. Sci. Eng. A, 2012, vol. 554, pp. 22–32.10.1016/j.msea.2012.05.096 ↗
40. J.Q. Qi, H.W. Wang, C.M. Zou, W.Q. Wei, and Z.J. Wei: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7669–73.10.1016/j.msea.2011.06.077 ↗
41. S.Q. Wang, J.H.Liu, and D.L.Chen, Mater. Sci. Eng. A, 2013, vol. 584, pp. 47–56.10.1016/j.msea.2013.07.009 ↗
42. P. Castany, F. Pettinari-Sturmel, J. Crestou, J. Douin, and A. Coujou: Acta Mater., 2007, vol. 55, pp. 6284–91.10.1016/j.actamat.2007.07.032 ↗
43. T. Li, E. A. Olevsky, and M.A. ´ Meyers: Mater. Sci. Eng. A, 2008, vol. 473, pp. 49–57.10.1016/j.msea.2007.03.069 ↗
44. GuiMing Song, Ying Wu, and Qiang Li: J. Eur. Ceram. Soc., 2002, vol. 22, pp. 559–66.10.1016/S0955-2219(01)00308-9 ↗
45. Z. Fan, P. Tsakiropoulos, and A.P. Miodownik: Mater. Sci. Technol., 1992, vol. 8, pp. 922–29.10.1179/mst.1992.8.10.922 ↗
46. Y. Yang, H. Lu, C. Yu, and J.M. Chen: J. Alloys Compd., 2009, vol. 485, pp. 542–47.10.1016/j.jallcom.2009.06.023 ↗
47. Leyens C., and Peters M., Titanium and Titanium Alloys, 1st ed., WILEY-VCH, Weinheim, 2003.10.1002/3527602119 ↗