Applied Stress Affecting the Environmentally Assisted Cracking
Source abstract
Abstract
Stress corrosion cracking (SCC) is affected by the mode of applied stress, i.e., tension, compression, or torsion. The cracking is measured in terms of initiation time to nucleate a crack or time to failure. In a simple uniaxial loading under tension or compression, it is observed that the initiation time can vary in orders of magnitude depending on the alloy and the environment. Fracture can be intergranular or transgranular or mixed mode. Factors that affect SCC are solubility of the metal into surrounding chemical solution, and diffusion rate (like hydrogen into a tensile region) of an aggressive element into the metal and liquid metallic elements in the grain boundaries. Strain hardening exponent that affects the local internal stresses and their gradients can affect the diffusion kinetics. We examine two environments (Ga and 3.5 pct NaCl) for the same alloy 7075-T651, under constant uniaxial tension and compression load. These two cases provide us application to two different governing mechanisms namely liquid metal embrittlement (7075-Ga) and hydrogen-assisted cracking (7075-NaCl). We note that, in spite of the differences in their mechanisms, both systems show similar behavior in the applied Kvs crack initiation time plots. One common theme among them is the transport mechanism of a solute element to a tensile-stress region to initiate fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. B.F. Brown: Stress Corrosion Cracking of Metals, ASTM STP-518, ASTM, Philadelphia, p. 82, 1976.
2. D.A. Jones: Principles and Prevention of Corrosion, 2nd ed., Prentice Hall, Upper Saddle River, NJ, 1992.
3. M.H. Kamdar (1973): Prog. Mater. Sci. 15, pp 1-289.10.1016/0079-6425(73)90005-4 ↗
4. R.G. Gangloff: in Environment Induced Cracking of Metals (EICM-2), S. Shipilov, ed., Elsevier Science, Oxford, 2006, pp. 1–24.
5. M.A. Scheil, in Symposium on Stress corrosion Cracking, AIME and ASTM, New York, 1945, pp. 395–426.10.1520/STP42585S ↗
6. W.Y. Chu, J. Yao, and C.M. Hsiao, Corrosion, vol. 40, p. 302, 1984.10.5006/1.3581957 ↗
7. W.Y. Chu, R.M. Ma, and C.M. Hsiao; Corrosion, 43, 251 (1987).10.5006/1.3583145 ↗
8. K. Sadananda and A.K. Vasudevan; Metall. Mater. Trans. A, 42A, pp. 279-95, 2011.10.1007/s11661-010-0472-3 ↗
9. W.Y. Chu, X.M. Liu, J.L. Luo, and L.J. Qiao; Can. Metall. Q, 38, pp. 127-32, 1999.10.1016/S0008-4433(99)00002-6 ↗
10. W.Y. Chu, C. Hsiao and J.W. Wang: Metall. Trans. A, 16A, 1663-70, 1985.10.1007/BF02663022 ↗
11. B.A.Benson and R.G. Hoagland; Scripta Metall., vol.25, p. 1943, 1989.10.1016/0036-9748(89)90487-0 ↗
12. V. Sudaraghavan: Unpublished research, University of Michigan, Ann Arbor, Michigan, 2012.
13. T. Watanabe, S. Shima, and S. Karashima: in Embrittlement by Liquid and Solid Metals, M.H. Kamdar, ed., AIME Conference Proceedings, Warrandale, PA, 1984, pp. 173–81.
14. H.Ichinose and T.Takashima: in Embrittlement by Liquid and Solid Metals, M.H. Kamdar, ed., AIME Conference Proceedings, Warrandale, PA, 1984, pp. 197–229.
15. R.J. Borg and G.J. Dienes: An Introduction to Solid State Diffusion, Academic Press, New York, 1988.10.1016/B978-0-12-118425-4.50017-3 ↗
16. O. Kozlova and A. Rodin, Defects Diffus. Forum, 249, 231-34, 2006.10.4028/www.scientific.net/DDF.249.231 ↗
17. E. Pereiro-Lopez, W. Ludwig, D. Bellet and J. Baruchel; Nucl. Instrum. Methods Phys. Res. 200B, 333-38, 2003.10.1016/S0168-583X(02)01697-X ↗
18. M.O. Speidel, Metall. Trans. A, 6A, 631-51,1975.10.1007/BF02672284 ↗
19. J. Hahm, S.J. Sibener (2000) Appl. Surf. Sci. 161, 375-84.10.1016/S0169-4332(00)00280-4 ↗
20. X. Liu: Ph.D. Thesis, Ohio State University, 2005.
21. A.I. Rusanov, N.B. Uriev, P.V. Eryukin, T.G. Movchan, N.E. Esipova, Mendeleev Commun. 14, 58-59, 2004.10.1070/MC2004v014n02ABEH001875 ↗
22. H.A.Wriedt and R.A.Oriani, Acta Metall., 18, 753-60, 1970.10.1016/0001-6160(70)90039-8 ↗
23. P.N. Adler, R.L. Schulte, E.J. Scheid, E.A. Kamykowski, and F.J. Kuuene: Metall. Trans. A, 1980, vol. 11A, 1617–23, 1980.10.1007/BF02654526 ↗
24. H.H.Grimes, Acta Metall., 7, 782–86, 1959.10.1016/0001-6160(59)90093-8 ↗
25. N. Takano, Mater. Sci. Eng. A, vols. 483-484, 336–39, 2008.10.1016/j.msea.2006.08.144 ↗
26. J.R.Scully, G.A.Young, Jr., and S.W.Smith, Mater. Sci. Forum, vols. 331–337, 1583–1600, 2000.10.4028/www.scientific.net/MSF.331-337.1583 ↗
27. A.Pederson and H.Jonsson; Acta Metall., 57, 4036–45, 2009.
28. H. Kitagawa, A. Nakatani, S. Ogata, K. Saito and Y. Maegawa; JSME A, 40, 203–10, 1997.
29. M. Creager and P.C. Paris; Int. J. Fract. Mech. 3, 247-52, 1967.10.1007/BF00182890 ↗
30. P.S. Pao: Unpublished data, NRL Lab., Washington, 2011.
31. Y.Hirose, Z.Yajima, T. Koya and T. Mura, Int. J. Offshore Polar Eng., 5, 151–55, 1994.
32. Y. Hirose and T. Mura; Engg. Fract. Mech., 19, 317–29, 1984.10.1016/0013-7944(84)90026-2 ↗
33. M. Yamaguchi: Personal communications, Japan Atomic Energy Commission, Japan, 2011.
34. R. Stumpf and P.J. Feibelman; Phys. Rev. B, vol. 54(7), 5145-59, 1996.10.1103/PhysRevB.54.5145 ↗
35. D.L. Thomson, V. Heine, M.C. Payne, N. Marzari and M.W. Finnis, Acta Mater., 48, 3623-32, 2000.10.1016/S1359-6454(00)00175-0 ↗
36. E. Pereiro-Lopez, W. Ludwig, D. Bellet, P. Cloetns, and C. Lemaignan: Phys. Rev. Lett., 2005, vol. 95, p. 215501.10.1103/PhysRevLett.95.215501 ↗
37. Y. Jiang: Final Report on “Environmental Effects on the Incubation Time Characteristics in Stress Corrosion Cracking,” N00014-08-1-0646, April 2011.10.21236/ADA553752 ↗