journal article·2007-08

Process-Controlled Microstructure and Cast Morphology of Dendrite in Pulsed-Current Gas-Metal Arc Weld Deposits of Aluminum and Al-Mg Alloy

V.K. Goyal, P.K. Ghosh, J.S. Saini

Publisher page

Abstract

The microstructure and cast morphology of pulsed-current gas-metal arc (GMA) weld deposit of 1.6-mm-diameter aluminum (ER1100) and Al-Mg alloy (ER5183) filler wire have been studied on similar base material. The effect of the influence of the pulse frequency taken together with the peak and background currents and their durations, as defined by a dimensionless factor φ, varied in the range of 0.05 to 0.4 on the solidification behavior of the weld metal with respect to the morphology of its cast microstructure has been studied. The morphology of the dendrite as revealed under the scanning electron microscope (SEM) has been studied in reference to the change in the length of its coaxial growth, its aspect ratio, and its primary arm spacing, related to the variation in the factor φ. It is shown that the microstructure of the weld metal changes significantly with the change in the factor φ. It is also found that the variation in the mean current and heat input significantly affects the morphology of the dendrite, as defined here. The morphological characteristics of the dendrites have been correlated to the factor φ, the mean current, and the heat input. The dendrite arm spacing has been found to maintain a good correlation with the estimated cooling rate of the weld metal, in that it decreases with the increase in the cooling rate. At a given heat input, mean current, and φ, the Al-Mg alloy contains a comparatively larger fraction of finer dendrites with an appropriately similar morphology than does the aluminum weld deposit.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. E. Wiston: Data Sheets, IIW Manual, International Institute of Welding, 1974, p. 24
2. T. DebRoy and S.A. David: Rev. Mod. Phys., 1995, vol. 67 (1)10.1103/RevModPhys.67.85 ↗
3. W. Gruhl, H. Cordier: Z. Metallkd., 1964, vol. 55, p. 557
4. F. Matsuda, K. Nakata, K. Tsukamoto, S. Johgan: Trans. JWRI, 1985, vol. 14 (2), p. 299
5. P.K. Ghosh, V. Sharma: Mater. Trans., JIM, 1991, vol. 32 (2), pp. 145–5010.2320/matertrans1989.32.145 ↗
6. P.K. Ghosh, S.R. Gupta, P.C. Gupta, R. Rathi: Pract. Met., 1990, vol. 27, pp. 613–2610.1515/pm-1990-271204 ↗
7. N.B. Potluri, P.K. Ghosh, P.C. Gupta, and Y.S. Reddy: Weld. J., 1996, vol. 75, pp. 62s–70s
8. P.K. Ghosh, S.R. Gupta, H.S. Randhawa: Int. J. Join. Mater., 2000, 12 (3), pp. 76–85
9. P.K. Ghosh: Int. J. Join. Mater., 1996, vol. 8 (4), pp. 157–61
10. P.K. Ghosh, B.K. Rai: ISIJ Int., 1996, vol. 36 (8), pp. 1036–4510.2355/isijinternational.36.1036 ↗
11. H.S. Randhawa, P.K. Ghosh, S.R. Gupta: ISIJ Int., 1998, vol. 38 (3), pp. 276–8410.2355/isijinternational.38.276 ↗
12. P.K. Ghosh, B.K. Rai: Ind. Weld. J., 1998, vol. 31 (4), pp. 30–3910.22486/iwj.v31i4.177643 ↗
13. P.K. Ghosh, S.R. Gupta, H.S. Randhawa: Int. J. Join. Mater., 1999, vol. 11 (4), pp. 99–110
14. H.S. Randhawa, P.K. Ghosh, S.R. Gupta: ISIJ Int., 2000, vol. 40 (1), pp. 71–7610.2355/isijinternational.40.71 ↗
15. P.K. Ghosh, H.S. Randhawa, S.R. Gupta: Metall. Trans. A, 2000, vol. 31A (12), pp. 2247–5910.1007/s11661-000-0142-y ↗
16. P.K. Ghosh, L. Dorn, S.F. Goecke: Int. J. Join. Mater., 2001, vol. 13 (2), pp. 40–47
17. P. K. Ghosh, L. Dorn, Marc Hübner, and V.K. Goyal: J. Mater. Processing Technol., 2006, in press
18. P.K. Ghosh: Int. Welding Conference (IWC 99), on Welding and Allied Technology, New Delhi, India, Feb. 15–17, Indian Institute of Welding, Calcutta, 1999, pp. 18–27
19. M.F. Ashby, K.E. Easterling: Acta Metall., 1982, vol. 30, pp. 1969–7810.1016/0001-6160(82)90100-6 ↗
20. H.M. Hussain, P.K. Ghosh, P.C. Gupta, N.B. Potluri: J. Mater. Process. Tech., 1997, vol. 9 (2), pp. 74–80
21. P.K. Ghosh, V.K. Goyal, H.K. Dhiman, M. Kumar: Sci. Technol. Weld. Join., 2006, vol. 11 (2), pp. 232–4210.1179/174329306X89251 ↗
22. V.K. Goyal, P.K. Ghosh, and J.S. Saini: J. Mater. Process. Technol., 2006, in press
23. M.E. Glicksman: Fundamentals of Dendritic Microstructures, Aluminum Transformation Technology and Applications, Proc. 2nd Int. Symp., Buenos Aires, Argentina, Aug. 1981, ASM, Metals Park, OH, 1981, pp. 24–26
24. M.C. Flemings: Solidification Processing, McGraw-Hill Book Company, New York, NY, 1974