Stress Corrosion Cracking Behavior at Inconel and Low Alloy Steel Weld Interfaces
Source abstract
Abstract
Three-dimensional microstructure observations, macro- to micro-scopic residual stress measurements by three methods and creviced bent beam SCC tests were performed for Inconel/low alloy steel (LAS) weld samples. The possible reasons for the suppression of SCC crack propagation near the weld interface found at a nuclear power plant were estimated to include the crack branching at the grain boundary (GB) parallel to the interface, i.e., Type II GB, compressive residual stresses in the LAS region and crack tip oxidation in the LAS at the interface. The formation mechanism of Type II GB and stress gradient in individual grains in the Inconel are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. B.M. Gordon: JOM, 2013, vol. 65. pp. 1043–56.10.1007/s11837-013-0658-4 ↗
2. S. Suzuki: Zairyo-to-Kankyo (Materials and Environments) 1999, vol. 48, pp. 753-762 (in Japanese).10.3323/jcorr1991.48.753 ↗
3. F.P. Ford, B.M. Gordon, and R.M. Horn: in ASM Handbook, Vol. 13C, Corrosion: Environments and Industries, A.D. Cramer and B.S. Covino, eds., ASM, Materials Park, OH, 2006, p. 31.
4. F.P. Ford, B.M. Gordon, and R.M. Horn: in Nuclear Corrosion Science and Engineering, D. Feron, ed., Woodhead Publishing, Cambridge, U.K., 2012, p. 548.10.1533/9780857095343.5.548 ↗
5. T. Kojima: Proceedings: Seminar on Countermeasures for Pipe Cracking in BWRs, EPRI WS-79-174, 1980. Vol. 4, Paper No. 50.
6. K. Yamauchi, I. Hamada, T. Okazaki, T. Yokono and A. Nishioka: Proceedings; ASME 5th International Conference on Pressure Vessel Technology, 1984, Vol.II. pp. 599–16.
7. H. Yamashita, S. Ooki, Y. Tanaka, K. Takamori, K. Asano and S. Suzuki: Press. Vessel. Pip. 2008, vol. 85, pp. 582–592.10.1016/j.ijpvp.2008.01.004 ↗
8. T. Aoki, S. Hattori, H. Anzai, and H. Sumimoto: Maintenology (Hozengaku, in Japanese), 2005, vol. 4, No. 1, pp. 34–41.
9. T. Aoki, S. Higuchi, H. Kobayashi and S. Shimizu: Maintenology (Hozengaku, in Japanese), 2005, vol. 4, No. 2, pp. 37–44.
10. J. Hou, Q. Peng, Y. Takeda, J. Kuniya and T. Shoji: Corrosion Science, 2010, vol. 52, pp.3949-3954.10.1016/j.corsci.2010.08.002 ↗
11. Q. Peng, H. Xue, J. Hou, K. Sakaguchi, Y. Takeda, J.Kuniya and T.Shoji: Corrosion Science, 2011, vol. 53, pp. 4309-4311.10.1016/j.corsci.2011.08.046 ↗
12. H. Abe, M. Ishizawa, and Y. Watanabe: 15th Int. Conf. Environmental Degradation, TMS, 2011, pp. 791–802.10.1002/9781118456835.ch83 ↗
13. Y. Sakakibara, G. Nakayama, and T. Hirano: Zairyo-to-Kankyo (Materials and Environments) 2012, vol. 61, pp. 171-176.10.3323/jcorr.61.171 ↗
14. Y. Sakakibara, Y. Itabashi, T. Takanashi, G. Nakayama, T. Fujii, Y. Shimamura, and K. Togo: Zairyo-to-Kankyo (Materials and Environments) 2012, vol. 61, pp. 177-181.10.3323/jcorr.61.177 ↗
15. A. Sato, M. T. Iwabuchi, and S. Tsujikawa, Zairyo-to-Kankyo (Materials and Environments), 2014, vol. 63, pp. 25-31.10.3323/jcorr.63.25 ↗
16. Y. Tomota, Y. Xia, and K. Inoue: Acta Mater., 1998, vol. 46, pp.1577-1587.10.1016/S1359-6454(97)00350-9 ↗
17. M. Ojima, Y. Adachi, Y. Tomota, K. Ikeda and Y. Katada: J. Jpn. Inst. Metals (in Japanese), 2009, vol. 73, pp. 283-289.10.2320/jinstmet.73.283 ↗
18. Business & Technology Daily News (in Japanese), 2011.3.15, No. 023:24.
19. N. Sato, Y, Adachi, H. Kawata, and K. Kaneko: ISIJ Int, 2012, vol. 52, pp. 1362-1365.10.2355/isijinternational.52.1362 ↗
20. T. Lorentzen: in Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation, M.E. Fizpatrick and A. Lodini, eds., Taylor & Francis, 2003, pp. 114–30.10.1201/9780203608999.ch7 ↗
21. M.T. Huchings, P.J. Withers, T.M. Holden, and T. Lorentzen: Introduction to the Characterization of Residual Stress by Neutron Diffraction, CRC Press, Taylor & Francis, 2005, pp. 149–202.10.1201/9780203402818 ↗
22. A.J. Wilkinson, G.B. Meaden, and D.J. Dingley: Mater. Sci. Technol. 2006, vol. 22, pp. 1271-1278.10.1179/174328406X130966 ↗
23. M. Ojima, Y. Adachi, S. Suzuki, and Y. Tomota: Acta Mater., 2011, vol. 59, pp. 4177-4185.10.1016/j.actamat.2011.03.042 ↗
24. JSMS-SD-5-02: Standard for X-ray Stress Measurements (Steel), 2002. Japan Soc. Materials Science, pp. 17–20.
25. T. Ito, T. Nagatani, S. Harjo, H. Arima, J. Abe, K. Aizawa and A. Moriai: Mater. Sci. Forum, 2010, vol. 652, pp. 238-241.10.4028/www.scientific.net/MSF.652.238 ↗
26. S. Harjo, T. Ito, K. Aizawa, H. Arima, J. Abe, A. Moriai, T. Iwahashi, and T. Kamiyama: Mater. Sci. Forum, 2011, vol. 681, pp. 443-446.10.4028/www.scientific.net/MSF.681.443 ↗
27. R. Oishi, M. Yonemura, Y. Nishimaki, S. Torii, A. Hoshikawa, T. Ishigaki, T. Morishima, K. Mori, and T. Kamiyama: Nucl. Instrum. Methods Phys. Res. A, 2009, vol. 600, pp. 94–97.10.1016/j.nima.2008.11.056 ↗
28. S. Itahashi, M. Takanashi, Y. Sakakibara, G. Nakayama, and T. Hirano: Zairyo-to-Kankyo (Materials and Environments), 2012, vol. 61, pp. 101-104.10.3323/jcorr.61.101 ↗
29. H.K.D.H. Bhadeshia: Bainite in Steel, The Institute of Materials, 1992, pp. 61–69.
30. T.W. Nelson, J.C.Lippold, and M.J. Mills: Weld. J., 1999, pp. 329s–37s.
31. T.W. Nelson, J.C.Lippold, and M.J. Mills: Weld. J., 2000, pp. 277s–277s.
32. Y. Tomota and H. Suzuki: unpublished research at JAEA (2009).
33. Y. Mikami, R. Uraguchi, K. Sogabe, M. Mochizuki, and S. Fujimoto: Preprints of National Meeting of Japan Welding Society, 2009, vol. 84, pp. 36–39 (in Japanese).
34. S. Gulbrandsen: Overview of Stress Corrosion Cracking in Stainless Steel: Electronic Enclosures in Extreme Environment Conditions, www.dfrsolutions.com (down loaded in June 2014); in which the corresponding table was cited from A.J. Sedricks and R.H. Jones, ed.: Stress-Corrosion Cracking Materials Performance and Evaluation, 1992, pp. 1–40.
35. F.P. Ford: Stress Corrosion Cracking of Carbon and Low Alloy Steels, B-135-B157, http://pbadupws.nrc.gov/docs/ML0707/ML070710260.pdf, June, 2014.
36. R.W. Staehie: Predicting Failure Which Have Not Yet Been Observed, B211-http://pbadupws.nrc.gov/docs/ML0707/ML070710260.pdf, June, 2014.
37. X.S. Du, Y.J. Su, C. Zhang, J.X. Li, L.J. Qiao, W.Y. Chu, W.G. Chen, Q.S. Zhang, D.X. Liu: Corrosion Science, 2013, vol. 69, pp. 302–310.10.1016/j.corsci.2012.11.043 ↗
38. J. Slewart and D.E. Williams: Corrosion Science, 1992, vol. 33, pp. 457–463.10.1016/0010-938X(92)90074-D ↗
39. M. Hamada: J.Jpn Welding Society. 2002, vol. 71, pp. 510-515.10.2207/qjjws1943.71.510 ↗
40. G. Miyamoto, N. Iwata, N. Takayama and T. Furuhara: Acta mater., 2010, vol.58, pp. 6393-6430.10.1016/j.actamat.2010.08.001 ↗
41. W. Gong, Y. Tomota, Y. Adachi, A.M. Paradowska, J.F. Kelleher and S.Y. Zhang: Acta mater., 2013, vol. 61, pp. 4142-4154.10.1016/j.actamat.2013.03.041 ↗
42. G. Kurdjumov and G.Z. Sachs: Z. Phys., 1930, vol. 64, pp. 325–343.10.1007/BF01397346 ↗
43. K. Nakane: J. Jpn. Weld. Soc. 1967, vol. 36, pp. 962–966.10.2207/qjjws1943.36.962 ↗
44. VY. Gertman, and K. Tangri: Acta Mater, 1997, vol. 45, pp. 4107-4116.10.1016/S1359-6454(97)00083-9 ↗
45. VY. Gertsman, and SM. Bruemmer: Acta Mater., 2001, vol. 49, pp. 1589-1598.10.1016/S1359-6454(01)00064-7 ↗
46. M. Shimada, H. Kokawa, Z.J. Wang, Y.S. Sato, and I. Karibe: Acta Mater., 2002, vol. 50, pp. 2331–2341.10.1016/S1359-6454(02)00064-2 ↗
47. L. Tan, TR. Allen, and JT. Busby: J. Nucl. Mater., 2013, vol. 441, pp. 661-666.10.1016/j.jnucmat.2013.03.050 ↗
48. A. King, G. Johnson, D. Engelberg, W. Ludwig, and J. Marrow: Science, 2008, vol. 321, pp. 382-385.10.1126/science.1156211 ↗
49. L. Babout, M. Janaszewski, T.J. Marrow, and P.J. Withers: Scripta. Mater., 2011, vol. 65, pp. 131–34.10.1016/j.scriptamat.2011.03.030 ↗
50. J. Kawakita, T. Shinohara, M. Watanabe, and Y. Adachi: Zairyo-to-Kankyo (Materials and Environments), 2013, vol. 62, pp. 111-113 (in Japanese).10.3323/jcorr.62.111 ↗
51. A. Clair, M. Foucault, O. Calonne, Y. Lacroute, L. Markey, M. Salazar, V. Vignal, and E. Finot: Acta Mater., 2011, vol. 59, pp. 3116-3123.10.1016/j.actamat.2011.01.051 ↗