Precipitates in Biomedical Co-Cr-Mo-C-N-Si-Mn Alloys
Source abstract
Abstract
The phase and dissolution behavior of precipitates in biomedical ASTM F75 Co-Cr-Mo-C-Si-Mn alloys were investigated. Alloys of five different compositions, Co-28Cr-6Mo-0.25C-1Si, Co-28Cr-6Mo-0.25C-1Mn, Co-28Cr-6Mo-0.25C-1Si-1Mn, Co-28Cr-6Mo-0.15C-1Si, and Co-28Cr-6Mo-0.35C-1Si, were heat-treated from 1448 to 1548 K. The precipitates observed in the as-cast and heat-treated alloys were carbides (M23C6type, h-phase, and p-phase) and an intermetallic compound (c-phase). The main precipitates observed after heat treatment at high temperatures such as 1548 K were p-phase and M23C6type carbide. At these high temperatures, two types of starlike precipitates—dense and stripe-patterned—were observed. The starlike-dense precipitate was the p-phase, and the starlike precipitate with a stripe pattern was identified as the M23C6type carbide and metallic fcc g-phase. In the alloys heat-treated at 1448 to 1498 K, blocky-dense M23C6type carbide was primarily observed. c-phase was detected in the Co-28Cr-6Mo-0.15C-1Si alloy under as-cast condition and after heat treatment at 1448–1523 K for a short holding time. The addition of Si seemed to increase the holding time for complete precipitate dissolution because of the effects of Si on the promotion of p-phase formation at high temperatures and the increased carbon activity in the metallic matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. ASTM F75–07, Annual Book of ASTM Standards, ASTM INTERNATIONAL, West Conshohocken, PA, 2008, vol. 13.01, pp. 64–67
2. ASTM F799–06, Annual Book of ASTM Standards, ASTM INTERNATIONAL, West Conshohocken, PA, 2008, vol. 13.01, pp. 342–44
3. R. Liu, M.X. Yao, and X. Wu: J. Eng. Mater. Technol., 2004, vol. 126, pp. 204–12.10.1115/1.1651096 ↗
4. S.-H. Lee, N. Nomura, and A. Chiba: Mater. Trans., 2008, vol. 49, pp. 260–64.10.2320/matertrans.MRA2007220 ↗
5. M. Herrera, A. Espinoza, J. Méndez, M. Castro, J. López, and J. Rendón: J. Mater. Sci.: Mater. Med., 2005, vol. 16, pp. 607–11.10.1007/s10856-005-2530-8 ↗
6. J.-P. Immarigeon, K. Rajan, and W. Wallace: Metall. Trans. A, 1984, vol. 15A, pp. 339–45.10.1007/BF02645120 ↗
7. S. Mineta, S. Namba, T. Yoneda, K. Ueda, and T. Narushima: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2129–38.10.1007/s11661-010-0227-1 ↗
8. Alfirano, S. Mineta, S. Namba, T. Yoneda, K. Ueda, and T. Narushima: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1941–4910.1007/s11661-011-0604-4 ↗
9. Alfirano: Ph.D. Thesis, Tohoku University, Sendai, 2011.
10. L.E. Ramírez, M. Castro, M. Méndez, J. Lacaze, M. Herrera, and G. Lesoult: Scripta Mater., 2002, vol. 47, pp. 811–16.10.1016/S1359-6462(02)00305-6 ↗
11. L.E. Ramírez-Vidaurri, M. Castro-Román, M. Herrera-Trejo, C.V. García-López, and E. Almanza-Casas: J. Mater. Proc. Technol., 2009, vol. 209, pp. 1681–87.10.1016/j.jmatprotec.2008.04.039 ↗
12. R. Rosenthal, B.R. Cardoso, I.S. Bott, R.P.R. Paranhos, and E.A. Carvalho: J. Mater. Sci., 2010, vol. 45, pp. 4021–28.10.1007/s10853-010-4480-x ↗
13. H.S. Dobbs and J.L.M. Robertson: J. Mater. Sci., 1983, vol. 18, pp. 391–401.10.1007/BF00560627 ↗
14. C. Montero-Ocampo, M. Talavera, and H. Lopez: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 611–20.10.1007/s11661-999-0052-6 ↗
15. H. Mancha, E. Carranza, J.I. Escalante, G. Mendoza, M. Méndez, F. Cepeda, and E. Valdés: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 979–84.10.1007/s11661-001-0355-8 ↗
16. M. Caudillo, M. Herrera-Trejo, M.R. Castro, E. Ramírez, C.R. González, and J.I. Juárez: J. Biomed. Mater. Res., 2002, vol. 59, pp. 378–85.10.1002/jbm.10001 ↗
17. J. Escobedo, J. Méndez, D. Cortéz, J. Goméz, M. Méndez, and H. Mancha: Mater. Des., 1996, vol. 17, pp. 79–83.10.1016/S0261-3069(96)00036-2 ↗
18. Y. Yamashita, Y. Li, E. Onodera, H. Matsumoto, and A. Chiba: Mater. Trans., 2010, vol. 51, pp. 1633–39.10.2320/matertrans.MAW201007 ↗
19. T. Kilner, A.J. Dempsey, R.M. Pilliar, and G.C. Weatherly: J. Mater. Sci., 1987, vol. 22, pp. 565–74.10.1007/BF01160770 ↗
20. S. Kurosu, H. Matsumoto, and A. Chiba: Mater. Lett., 2010, vol. 64, pp. 49–52.10.1016/j.matlet.2009.10.001 ↗
21. F. Vanderschaeve, R. Taillard, and J. Foct: J. Mater. Sci., 1995, vol. 30, pp. 6035–46.10.1007/BF01151525 ↗
22. N.C. Santhi Srinivas and V.V. Kutumbarao: Scripta Mater., 1997, vol. 37, pp. 285–91.10.1016/S1359-6462(97)00112-7 ↗
23. T.-H. Lee, C.-S. Oh, C.G. Lee, S.-J. Kim, and S. Takaki: Scripta Mater., 2004, vol. 50, pp. 1325–28.10.1016/j.scriptamat.2004.02.013 ↗
24. R.D. Knutsen, C.I. Lang, and J.A. Basson: Acta Mater., 2004, vol. 52, pp. 2407–17.10.1016/j.actamat.2004.01.031 ↗
25. M. Kikuchi, M. Kajihara, and S.-K. Choi: Mater. Sci. Eng. A, 1991, vol. 146, pp. 131–50.10.1016/0921-5093(91)90273-P ↗
26. J.W. Simmons, D.G. Atteridge, and J. Rawers: J. Mater. Sci., 1992, vol. 27, pp. 6105–15.10.1007/BF01133757 ↗
27. R.N.J. Taylor and R.B. Waterhouse: J. Mater. Sci., 1983, vol. 18, pp. 3265–80.10.1007/BF00544151 ↗
28. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
29. S. Mineta, Alfirano, S. Namba, T. Yoneda, K. Ueda, and T. Narushima: Mater. Sci. Forum, 2010, vols. 654–656, pp. 2176–7910.4028/www.scientific.net/MSF.654-656.2176 ↗
30. A.T. Allen and D.L. Douglass: Oxid. Met., 1999, vol. 51, pp. 1–22.10.1023/A:1018845901165 ↗
31. I.C. Chen and D.L. Douglass: Oxid. Met., 1992, vol. 38, pp. 189–205.10.1007/BF00666910 ↗