journal article·2013-12

Hot Deformation Behavior and Microstructural Evolution of a Nickel-Free Austenitic Steel with High Nitrogen Content

Ersoy Erisir, Ulrich Prahl, Wolfgang Bleck

Publisher page

Abstract

In current study, the effect of microstructure on hot ductility of nickel-free austenitic high nitrogen steel DIN EN 1.4452 was investigated. Phase transformations and precipitation were modeled as well as experimentally determined via microstructural evaluation. Hot tensile and compression tests were used to simulate the hot deformation behavior at temperatures between 1173 K and 1573 K (900 °C and 1300 °C). Hot tensile test determined the high-temperature properties. The effect of temperature on cracking sensibility during hot deformation was investigated using hot compression test. The results showed that better hot ductility is observed at temperatures ranging from 1423 K to 1523 K (1150 °C to 1250 °C). The increase of hot ductility depends on grain refinement due to dynamic recrystallization at this temperature range.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. V.G. Gavriljuk, H. Berns: High Nitrogen Steels, Springer Verlag, Berlin, 1999.10.1007/978-3-662-03760-7 ↗
2. M.O. Speidel and P.J. Uggowitzer: Stickstofflegierte Stähle, Ergebnisse der Werkstoff-Forschung, Band 4, ETH, Zürich, 1991.
3. G. Stein and I. Hucklenbroich, “Manufacturing and Applications of High Nitrogen Steels”, Materials and Manufacturing Processes, Vol. 19, 7–17, 2004.10.1081/AMP-120027494 ↗
4. M. Sumita, T. Hanawa and S.H. Teoh, “Development of Nitrogen-containing Nickel-free Austenitic Stainless Steels for Metallic Biomaterials—Review”, Materials Science and Engineering: C, Vol. 24, 753-760, 2004.10.1016/j.msec.2004.08.030 ↗
5. H. Hanninen, J. Romu, R. Ilola, J. Tervo, A. Laitinen, “Effects Of Processing and Manufacturing of High Nitrogen-containing Stainless Steels on their Mechanical, Corrosion and Wear Properties”, Mater. Process. Technol., Vol. 117, 424-430, 2001.10.1016/S0924-0136(01)00804-4 ↗
6. J. Menzel, W. Kirschner, G. Stein, “High Nitrogen Containing Ni-free Austenitic Steels for Medical Applications”, ISIJ International, Vol. 36, 893-900, 1996.10.2355/isijinternational.36.893 ↗
7. M. O. Speidel, “Nitrogen Containing Austenitic Stainless Steels”, Materialwissenschaft und Werkstofftechnik, Vol. 37, 875-880, 2006.10.1002/mawe.200600068 ↗
8. P. J. Uggowitzer, R. Magdowski, M. O. Speidel, “Nickel Free High Nitrogen Austenitic Steels”, ISIJ International, Vol. 36, 901-908, 1996.10.2355/isijinternational.36.901 ↗
9. P. Wan, Y. Rena, B. Zhang, K Yang, “Effect of nitrogen on blood compatibility of nickel-free high nitrogen stainless steel for biomaterial”, Materials Science and Engineering C, Vol. 30, 1183–89, 2010.10.1016/j.msec.2010.06.015 ↗
10. Tikhovski, H. Brauer, A. Fischer (2002) Materialwiss. Werkstofftech. 33:448–52.10.1002/1521-4052(200208)33:8<448::AID-MAWE448>3.0.CO;2-X ↗
11. A. Fischer, I. Tikhovskiy, R. Buescher, S. Weiss, “Mechanische und tribologische Eigenschaften von hochstickstoffhaltigen Austeniten”, Materialwissenschaft und Werkstofftechnik, Vol. 37, 747-754, 2006.10.1002/mawe.200600059 ↗
12. K. Yang and Y. Ren, “Nickel-free Austenitic Stainless Steels for Medical Applications”, Sci. Technol. Adv. Mater., Vol. 11, 1-13, 2010.10.1088/1468-6996/11/1/014105 ↗
13. W. Bleck, F. Hippenstiel, R. Kopp, and O. Dürr: Untersuchungen zur Warmumformbarkeit neuer stickstofflegierter nichtrostender Stähle/Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung. RWTH Aachen—AiF-Abschlussbericht Bd. 11147N, 2000.
14. E. Erisir, U. Prahl, W. Bleck, “Effect of Precipitation on Hot Formability of High Nitrogen Steels”, Materials Science and Engineering: A, Vol. 528, 519-525, 2010.10.1016/j.msea.2010.09.045 ↗
15. L. M. Kaputkina, V. G. Prokoshkina, O. V. Kviat, H. Dyja, J. Siwka and J. Wiedermann, “Structure and properties of nitrogen steels under hot deformation”, Journal of Materials Processing Technology, Vol. 125-126, 188-192, 2002.10.1016/S0924-0136(02)00376-X ↗
16. TCFE5: TCS Steels/Fe-Alloys Database (v.5) for Thermo-Calc, 2008.
17. Thermo-Calc TCC Software User’ Guide, Version Q, Stockholm Technology Park, Stockholm, 2005.