journal article·2013-08

Application of Martensitic Transformation Fundamentals to Select Appropriate Alloys for Grain Refining Through Martensite Thermomechanical Treatment

Peiman Behjati, Ahmad Kermanpur, Abbas Najafizadeh

Publisher page

Abstract

The main objective of the current work is to present a predictive model capable of assessing appropriation of a chemical composition for being used in the martensite thermomechanical treatment to develop nano/ultrafine-grained microstructures in austenitic steels. For this purpose, the correlation between stacking fault energy (SFE), driving force for transformation of martensite to austenite, fraction of deformation-induced α′-martensite, and saturation strain (e s) in some ternary Fe-Cr-Ni alloys and commercial austenitic steels was investigated. It was shown that the volume fraction of α′-martensite and e s (key parameters in the martensite treatment) are closely related to SFE and the driving force of the alloys. In addition, a nickel-free austenitic alloy was used to evaluate the discussions. A fairly good agreement was found between the calculated and the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. D.L. Johannnsen, A. Kyrolainen, and P.J. Ferriera: Metall. Mater. Trans. A, 2006, vol. 37, pp. 2325-38.10.1007/BF02586207 ↗
2. M.C. Somani, P. Juntunen, L.P. Karjalainen, R.D.K. Misra, and A. Kyrolainen: Metall. Mater. Trans. A, 2009, vol. 40, 729-44.10.1007/s11661-008-9723-y ↗
3. R.D.K. Misra, S. Nayak, P.K.C. Venkatasurya, V. Ramuni, M.C. Somani, and L.P. Karjalainen: Metall. Mater. Trans. A, 2010, vol. 41, pp. 2162-74.10.1007/s11661-010-0230-6 ↗
4. R.D.K. Misra, Z. Zhang, P.K.C. Venkatasurya, M.C. Somani, and L.P. Karjalainen: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7779-92.10.1016/j.msea.2010.08.051 ↗
5. M. Eskandari, A. Kermanpur, and A. Najafizadeh: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2241-49.10.1007/s11661-009-9916-z ↗
6. R.D.K.S. Misra, S. Nayak, A. Mali, J.S. Shah, M.C. Somani, and L.P. Karjalainen: Metall. Mater. Trans. A, 2010, vol. 41, pp. 3-12.10.1007/s11661-009-0072-2 ↗
7. A. Kisko, A. Hamada, L.P. Karjalainen, and J. Talonen: Microstructure and Mechanical Properties of Reversion Treated High Mn Austenitic 204Cu and 201 Stainless Steels, HMnS 2011, May 15–18, 2011, Grand Hilton Hotel, Seoul, paper B-19.
8. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108-11.10.1016/j.actamat.2007.07.015 ↗
9. E.S. Perdahcıoglu, H.J.M. Geijselaers, and J. Huetink: Mater. Sci. Eng. A, 2008, vols. 481-2, pp. 727-31.10.1016/j.msea.2007.02.153 ↗
10. S. Rajasekhara, L.P. Karjalainen, A. Kyrolainen, and P.J. Ferreira: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1986-96.10.1016/j.msea.2009.11.037 ↗
11. A. DI Schino and J. Kenny: Mater. Sci. Lett., 2002, vol. 2l, pp. 1631–34.10.1023/A:1020338103964 ↗
12. R. Kumar, B. Das, K. Swapan, B. Mahato, and R.N. Ghosh: J. Mater. Sci., 2010, vol. 45, pp. 911-8.10.1007/s10853-009-4020-8 ↗
13. M. Eskandari, A. Najafizadeh, and A. Kermanpur: Mater. Sci. Eng. A, 2009, vol. 519, pp. 46-50.10.1016/j.msea.2009.04.038 ↗
14. M. Moallemi, A. Najafizadeh, A. Kermanpur, and A. Rezaee: Mater. Sci. Eng. A, 2011, vol. 530, pp. 378-81.10.1016/j.msea.2011.09.099 ↗
15. A. Rezaee, A. Kermanpur, A. Najafizadeh, and M. Moallemi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5025-9.10.1016/j.msea.2011.02.093 ↗
16. A. Rezaee, A. Kermanpur, A. Najafizadeh, and M. Moallemi: Mater. Des., 2011, vol. 32, pp. 4437-42.10.1016/j.matdes.2011.03.065 ↗
17. T. Angel: J. Iron Steel Inst., 1954, vol. 177, no. 5, pp. 165-74.
18. K. Nohara, Y. Ono, and N. Ohashi: J. Jpn. Iron Steel Inst., 1977, vol. 63, no. 5, pp. 212-22.10.2355/tetsutohagane1955.63.5_772 ↗
19. K. Tomimura, S. Takaki, S. Tanimoto, and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 721-7.10.2355/isijinternational.31.721 ↗
20. J. Talonen, P. Nenonen, G. Pape, and H. Hänninen: Metall. Mater. Trans. A, 2005, vol. 36, pp. 421-32.10.1007/s11661-005-0313-y ↗
21. L.E. Murr, K.P. Staudhammer, and S.S. Hecker: Metall. Trans. A, 1982, vol. 13, pp. 627-35.10.1007/BF02644428 ↗
22. L. Vitos, J.O. Nilsson, and B. Johansson: Acta Mater., 2006, vol. 54, pp. 3821-6.10.1016/j.actamat.2006.04.013 ↗
23. P.J. Brofaman and G.S. Ansell: Metall. Trans., 1978, vol. 9, pp. 879-80.10.1007/BF02649799 ↗
24. P. Behjati and A. Najafizadeh: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3752-60.10.1007/s11661-011-0769-x ↗
25. L. Kaufman: Trans. Met. Soc., 1959, vol. 215, pp. 218-27.
26. S. Curtze, V.T. Kuokkalaa, A. Oikari, J. Talonen, and H. Hänninen: Acta Mater., 2011, vol. 59, pp. 1068-76.10.1016/j.actamat.2010.10.037 ↗
27. G. B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1897-904.
28. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6, pp. 1345-52.10.1007/BF02641927 ↗
29. A. Rezaee, A. Kermanpur, A. Najafizadeh, M. Moallemi, and H.S. Baghbadorani: Mater. Des., 2013, vol. 46, pp. 49–53.10.1016/j.matdes.2012.09.054 ↗
30. F. Forouzan, A. Najafizadeh, A. Kermanpur, A. Hedayati, and R. Surkialiabad: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7334-9.10.1016/j.msea.2010.08.002 ↗
31. F. Forouzan, A. Kermanpur, A. Najafizadeh, and A. Hedayati: Int. J. Modern Phys., 2012, vol. 5, pp. 383-90.
32. M. Moallemi: Master’s Thesis, Isfahan University of Technology, 2010.
33. F. Forouzan: Master’s Thesis, Isfahan University of Technology, 2012.
34. B. Thomas: J. Microsc. Spectrosc. Electron., 1976, vol. 1, pp. 623-36.
35. J.H. Jun and C.S. Choi: Mater. Sci. Eng. A, 1998, vol. 257, pp. 353-6.10.1016/S0921-5093(98)00994-0 ↗
36. F. Forouzan, A. Najafizadeh, A. Kermanpur, and A. Hedayati: Int. J. ISSI, 2009, vol. 6, pp. 6-13.
37. H. Mirzadeh and A. Najafizadeh: Mater. Des., 2009, vol. 30, p. 5703.10.1016/j.matdes.2008.05.057 ↗
38. K. Tomimura, S. Takaki, and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 1431-7.10.2355/isijinternational.31.1431 ↗
39. S. Takaki, K. Tomimura, and S. Ueda: ISIJ Int., 1994, vol. 34, pp. 522-7.10.2355/isijinternational.34.522 ↗
40. L. Kaufman, E.V. Clougherty, and R.J. Weiss: Acta Metall., 1963, vol. 11, pp. 323-35.10.1016/0001-6160(63)90157-3 ↗
41. D.W. Suh, S.J. Park, C.H. Lee, and S.J. Kim: Metall. Mater. Trans. A, 2009, vol. 40, pp. 264-8.10.1007/s11661-008-9734-8 ↗