journal article·2022-07Open access

Improved Creep and Tensile Properties of a Corrosion Resistant Ni-Based Superalloy Using High Temperature Aging and Nb/Ta Additions

Martin Detrois, Stoichko Antonov, Kyle A. Rozman, Jeffrey A. Hawk, Paul D. Jablonski

Abstract

Resistance to creep deformation is essential for cast and wrought Ni-based superalloys in next generation energy systems due to the considerable exposure times required at the operating temperature. The amount of precipitate strengthening was increased in variants to Inconel alloy 725 (IN725), a corrosion resistant alloy, to improve its elevated temperature mechanical strength. Additions of Nb or Ta coupled with a high temperature aging (HTA) heat treatment promoted the formation of γ″ precipitates and grain boundary phases which led to significant increases in time to failure. The HTA increased the creep life of various alloy formulations as compared to the standard aging heat treatment with a maximum improvement of 371 pct. The Nb and Ta additions lowered the minimum creep rate (MCR) and had a similar effect on increasing creep life. The positive effect of the additions was more pronounced when coupled with the HTA which employed a higher temperature in the first step of the heat treatment to promote precipitate phase formation. The Ti/Al ratio was used to design alloys with preferential formation of γ′ or γ″ precipitates. Compact morphology precipitates were formed in the alloys with a low Ti/Al ratio. While a low Ti/Al ratio was primarily associated with lower MCRs, the effect on the creep life was less evident than that of the HTA. Using additions of Nb or Ta and a HTA heat treatment, the creep life of IN725 for testing at 973 K (700 °C) and 483 MPa was improved by up to 256 pct.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. R. Viswanathan, J.F. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis, and R. Purgert: J. Mater. Eng. Perform., 2005, vol. 14, pp. 281–92.10.1361/10599490524039 ↗
2. F. Abe: Engineering., 2015, vol. 1, pp. 211–24.10.15302/J-ENG-2015031 ↗
3. M. Fukuda, Y. Yagi, H. Fukutomi, S. Nishinoiri, K. Sato, T. Nishii, K. Nishimaki, T. Takano, H. Aoki, Y. Okuma, T. Furukawa, M. Shimada, N. Saito, K. Hashimoto, M. Kitamura, E. Saito, H. Semba, Y. Matsubara, K. Takahashi, T. Takahashi, and T. Suga: in Joint EPRI-123HiMAT International Conference on Advances in High Temperature Materials, J. Shingledecker and M. Takeyama, eds., ASM International, Nagasaki, Japan, 2019, pp. 1487–99.10.31399/asm.cp.am-epri-2019p1487 ↗
4. H. Hack, R. Purgert, and R. Schrecengost: in Joint EPRI-123HiMAT International Conference on Advances in High Temperature Materials, J. Shingledecker and M. Takeyama, eds., ASM International, Nagasaki, Japan, 2019, pp. 1476–86.
5. K. Kubushiro, K. Nomura, T. Matsuoka, H. Nakagawa, and K. Muroki: IHI Eng. Rev., 2016, vol. 49, pp. 34–43.
6. R. Purgert, J. Phillips, H. Hendrix, J. Shingledecker, and J. Tanzosh: 2016, p. 79.
7. M.C. Hardy, M. Detrois, E.T. McDevitt, C. Argyrakis, V. Saraf, P.D. Jablonski, J.A. Hawk, R.C. Buckingham, H.S. Kitaguchi, and S. Tin: Metall. Mater. Trans. A., 2020, vol. 51, pp. 2626–50.10.1007/s11661-020-05773-6 ↗
8. Special Metals Corporation: INCONEL Alloy 725, 2005.
9. L.E. Shoemaker: 6th Int. Symp. Superalloys 718, 625, 706 Deriv., 2005, pp. 409–18.10.7449/2005/Superalloys_2005_409_418 ↗
10. S. Mannan and F. Veltry: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS (The Minerals, Metals & Materials Society), 2001, pp. 345–56.10.7449/2001/Superalloys_2001_345_356 ↗
11. S.K. Mannan, E.L. Hibner, and B.C. Puckett: Corrosion, 2003, p. 3125.
12. M. Detrois, P.D. Jablonski, and J.A. Hawk: Mater. Sci. Eng. A, 2021, vol. 799, p. 140337.10.1016/j.msea.2020.140337 ↗
13. E.L. Hibner, H.W. Sizek, and S.K. Mannan: Superalloys 718, 625, 716 Deriv., 1997, pp. 491–501.10.7449/1997/Superalloys_1997_491_501 ↗
14. M. Detrois, K.A. Rozman, P.D. Jablonski, and J.A. Hawk: in Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, E. Ott, X. Liu, J. Andersson, Z. Bi, K. Bockenstedt, I. Dempster, J. Groh, K. Heck, P.D. Jablonski, M. Kaplan, D. Nagahama, and C. Sudbrack, eds., Springer International Publishing, Pittsburgh, PA, 2018, pp. 421–37.
15. A. Agnoli, M. Bernacki, R. Logé, J.M. Franchet, J. Laigo, and N. Bozzolo: in Superalloys 2012: 12th International Symposium on Superalloys, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, and J. Telesman, eds., TMS (The Minerals, Metals & Materials Society), 2012, pp. 73–82.10.1002/9781118516430.ch8 ↗
16. H.-Y. Bor, C.-N. Wei, H.T. Nguyen, A.-C. Yeh, and C.-M. Kuo: in 7th International Symposium on Superalloy 718 and Derivatives, E.A. Ott, J.R. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G.P. Sjöberg, and A. Wusatowska-Srnek, eds., TMS (The Minerals, Metals & Materials Society), 2010, pp. 679–88.
17. L. Viskari, Y. Cao, M. Norell, G. Sjöberg, and K. Stiller: Mater. Sci. Eng. A., 2011, vol. 528, pp. 2570–80.10.1016/j.msea.2010.11.080 ↗
18. E.J. Pickering, H. Mathur, A. Bhowmik, O.M.D.M. Messé, J.S. Barnard, M.C. Hardy, R. Krakow, K. Loehnert, H.J. Stone, and C.M.F. Rae: Acta Mater., 2012, vol. 60, pp. 2757–69.10.1016/j.actamat.2012.01.042 ↗
19. M. Detrois, S. Antonov, R.C. Helmink, and S. Tin: Jom., 2014, vol. 66, pp. 2478–85.10.1007/s11837-014-1157-y ↗
20. S. Antonov, M. Detrois, R.C. Helmink, and S. Tin: J. Alloys Compd., 2015, vol. 626, pp. 76–86.10.1016/j.jallcom.2014.11.155 ↗
21. P.D. Jablonski and J.A. Hawk: J. Mater. Eng. Perform., 2017, vol. 26, pp. 4–13.10.1007/s11665-016-2451-3 ↗
22. ASTM International: ASTM E8/E8M-16a, Standard Test Methods for Tension Testing of Metallic Materials, West Conshohocken, PA, 2016.
23. ASTM International: ASTM E139-11(2018), Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials, West Conshohocken, PA, 2018.
24. K.A. Rozman, M. Detrois, T. Liu, M.C. Gao, P.D. Jablonski, and J.A. Hawk: J. Mater. Eng. Perform., 2020, vol. 29, pp. 5822–39.10.1007/s11665-020-05103-2 ↗
25. Z. Xu, L. Jiang, J. Dong, Z. Li, and X. Zhou: J. Alloys Compd., 2015, vol. 620, pp. 197–203.10.1016/j.jallcom.2014.09.112 ↗
26. R. Cozar and A. Pineau: Metall. Trans., 1973, vol. 4, pp. 47–59.10.1007/BF02649604 ↗
27. R. Cozar and A. Pineau: Metall. Trans., 1974, vol. 5, pp. 2471–2.10.1007/BF02644030 ↗
28. J. He, G. Han, S. Fukuyama, and K. Yokogawa: Acta Mater., 1998, vol. 46, pp. 215–23.10.1016/S1359-6454(97)00221-8 ↗
29. ASTM International: ASTM E112-13, Standard Test Methods for Determining Average Grain Size, West Conshohocken, PA, 2013.
30. L.M. Suave, J. Cormier, P. Villechaise, A. Soula, Z. Hervier, D. Bertheau, and J. Laigo: Metall. Mater. Trans. A., 2014, vol. 45A, pp. 2963–82.10.1007/s11661-014-2256-7 ↗
31. M. Detrois, P.D. Jablonski, and J.A. Hawk: in Superalloys 2020, S. Tin, ed., Springer International Publishing, Seven Springs, PA, 2020, pp. 171–81.10.1007/978-3-030-51834-9_17 ↗
32. L. Finet, V.A. Esin, V. Maurel, and L. Nazé: in Superalloys 2020, S. Tin, ed., Springer, Cham, 2020, pp. 112–21.10.1007/978-3-030-51834-9_11 ↗
33. M. Rath, M. Rath, E. Povoden-Karadeniz, and E. Kozeschnik: Superalloys., 2016, vol. 2016, pp. 97–105.
34. X. Xie, G. Wang, J. Dong, C. Xu, W.-D. Cao, and R. Kennedy: Superalloys 718, 625, 706 Var. Deriv., 2005, pp. 179–91.10.7449/2005/Superalloys_2005_179_191 ↗
35. A. Nicolaÿ, J. Franchet, N. Bozzolo, and J. Cormier: in Superalloys 2020, Tin S. et al., ed., Springer, Cham, 2020, pp. 559–69.10.1007/978-3-030-51834-9_54 ↗