journal article·2015-08

Forge Welding of Magnesium Alloy to Aluminum Alloy Using a Cu, Ni, or Ti Interlayer

Hideki Yamagishi, Junji Sumioka, Shigeki Kakiuchi, Shogo Tomida, Kouichi Takeda, Kouichi Shimazaki

Publisher page

Abstract

The forge-welding process was examined to develop a high-strength bonding application of magnesium (Mg) alloy to aluminum (Al) alloy under high-productivity conditions. The effect of the insert material on the tensile strength of the joints, under various preheat temperatures and pressures, was investigated by analyzing the reaction layers of the bonded interface. The tensile strengths resulting from direct bonding, using pure copper (Cu), pure nickel (Ni), and pure titanium (Ti) inserts were 56, 100, 119, and 151 MPa, respectively. The maximum joint strength reached 93 pct with respect to the Mg cast billet. During high-pressure bonding, a microscopic plastic flow occurred that contributed to an anchor effect and the generation of a newly formed surface at the interface, particularly prominent with the Ti insert in the form of an oxide layer. The bonded interfaces of the maximum-strength inserts were investigated using scanning electron microscopy–energy-dispersive spectroscopy and electron probe microanalysis. The diffusion reaction layer at the bonded interface consisted of brittle Al-Mg intermetallics having a thickness of approximately 30 μm. In contrast, for the three inserts, the thicknesses of the diffusion reaction layer were infinitely thin. For the pure Ti insert, exhibiting the maximum tensile strength value among the inserts tested, focused ion beam–transmission electron microscopy–EDS analysis revealed a 60-nm-thick Al-Ti reaction layer, which had formed at the bonded interface on the Mg alloy side. Thus, a high-strength Al-Mg bonding method in air was demonstrated, suitable for mass production.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. J.L. Murray: in Binary Alloy Phase Diagrams, 2nd ed., ASM International, OH, 1992, pp. 169–171.
2. D. Dietrich, D. Nickel, M. Krause, T. Lampke, M.P. Coleman, and V. Randle: J. Mater. Sci., 2011, vol. 46, pp. 357–64.10.1007/s10853-010-4841-5 ↗
3. Ming-Che Chen, Che-Wei Kuo, Chia-Ming Chang, Chih-Chun Hsieh, Yin-Yu Chang, and Weite Wu: Mater. Trans., 2007, vol. 48, pp. 2595–2598.10.2320/matertrans.MD200718 ↗
4. Xianrong Li, Wei Liang, Xingguo Zhao, Yan Zhang, Xiaopeng Fu, and Fencheng Liu: J. Alloys Compd., 2009, vol. 471, pp. 408–11.10.1016/j.jallcom.2008.03.107 ↗
5. Jian Zhang, Guoqiang Luo, Yiyu Wang, Qiang Shen, and Lianmeng Zhang: Mater. Let., 2012, vol. 83, pp. 189–91.10.1016/j.matlet.2012.06.014 ↗
6. H. Yamagishi and A. Mochikawa: PCT/JP2011/003298.
7. M Hiraishi, A Ishikawa, K Tamiya (2004). Report of the Industrial Research Institute of NIGATA Prefecture. 33: 49–52.
8. S. Jing, W. Ke-hong, Z. Qi, Z. De-ku, H. Jun, and GE Jia-qi: Trans. Nonferrous Met. Soc. China, 2012, vol. 22, pp. 1961–66.10.1016/S1003-6326(11)61414-3 ↗
9. J.R. Davis: in Nickel, Cobalt, and their Alloys, ASM International, Ohio, 2000, pp. 19-21.
10. M. Minakawa (1967). Hitachi Review. 49: 62-65.
11. A.A. Nayeb-Hashemi and J.B. Clark: in Binary Alloy Phase Diagrams, 2nd ed., ASM International, Ohio, 1992, pp. 2529–30.
12. Nishihara M, Yamamoto S (1961) J. Jpn. Soc. Testing Mater., 90(10):100–06.
13. J.L. Murray: in Binary Alloy Phase Diagrams, 2nd ed., ASM International, Ohio, 1992, pp. 2559–60.