Surface Properties and Mechanical Performance of Ti-Based Dental Materials: Comparative Effect of Valve Alloying Elements and Structural Defects
Source abstract
Abstract
Abstract Two approaches can be taken when designing properties of the native oxide layers formed on Ti-based biomedical materials: (i) changing the chemical composition of the substrate by adding biocompatible, valve alloying elements, and (ii) changing the microstructure of the substrate—especially its level of defectiveness—through large plastic deformation. However, especially in the aggressive fluoridated oral environment, it is still unknown what factor is more effective in terms of enhancing oxide layer protectiveness against biocorrosion: (i) the presence of valve alloying elements, or (ii) a high number of structural defects. To gain knowledge about the separate influence of both of these factors, surface properties were examined for commercially pure Ti and Ti–Nb–Ta–Zr alloy in microcrystalline state as well as after multiple-pass cold rolling, a process that can be readily scaled up to the industrial level. This study showed that while valve-alloying elements and structural defects individually have a beneficial effect on Ti oxide layer properties in fluoridated medium, they not have to act in a synergistic manner. These findings have to be taken into account when designing future Ti-based dental materials together with analyzing their mechanical performance with respect to mechanical strength and elastic properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (82)
Show source-provided references
1. Ş Çallıoğlu and P. Acar: Mater. Sci. Eng. C., 2020, vol. 110, p. 110715.10.1016/j.msec.2020.110715 ↗
2. L. Zhang and L. Chen: Adv. Eng. Mater., 2019, vol. 21, p. 1801215.10.1002/adem.201801215 ↗
3. S. Acharya, S. Mishra, K.U. Yazar, K. Chatterjee, and S. Suwas: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 4045–58.10.1007/s11661-020-05850-w ↗
4. K. Ozaltin, A. Panigrahi, W. Chrominski, A.G. Bulutsuz, M. Kulczyk, M.J. Zehetbauer, and M. Lewandowska: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 5747–55.10.1007/s11661-017-4278-4 ↗
5. F. Haftlang, A. Zarei-Hanzaki, and H.R. Abedi: Mater. Sci. Eng. C., 2020, vol. 109, p. 110561.10.1016/j.msec.2019.110561 ↗
6. D. Kuczyńska-Zemła, E. Kijeńska-Gawrońska, A. Chlanda, A. Sotniczuk, M. Pisarek, K. Topolski, W. Swieszkowski, and H. Garbacz: Appl. Surf. Sci., 2020, vol. 511, p. 145523.10.1016/j.apsusc.2020.145523 ↗
7. M. Niinomi: J. Biomed. Mater. Res. A., 2019, vol. 107, pp. 944–54.10.1002/jbm.a.36667 ↗
8. C. Vasilescu, S.I. Drob, P. Osiceanu, J.M.C. Moreno, M. Prodana, D. Ionita, I. Demetrescu, M. Marcu, I.A. Popovici, and E. Vasilescu: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 513–23.10.1007/s11661-016-3774-2 ↗
9. H. Miyamoto: Mater. Trans., 2016, vol. 575, pp. 559–72.10.2320/matertrans.M2015452 ↗
10. S.F. Jawed, C.D. Rabadia, Y.J. Liu, L.Q. Wang, P. Qin, Y.H. Li, X.H. Zhang, and L.C. Zhang: Mater. Sci. Eng. C., 2020, vol. 110, p. 110728.10.1016/j.msec.2020.110728 ↗
11. C.N. Elias, D.J. Fernandes, F.M. De Souza, E.D.S. Monteiro, and R.S. De Biasi: J. Mater. Res. Technol., 2019, vol. 8, pp. 1060–69.10.1016/j.jmrt.2018.07.016 ↗
12. T. Krajňák, M. Janeček, P. Minárik, J. Veselý, P. Cejpek, J. Gubicza, P.T. Hung, D. Preisler, F. Nový, and A.G. Raab: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 1–14.
13. A.R.V. Nunes, S. Borborema, L.S. Araújo, L. Malet, J. Dille, and L.H. de Almeida: J. Alloys Compd., 2020, vol. 820, p. 153078.10.1016/j.jallcom.2019.153078 ↗
14. S. Bahl, S. Suwas, and K. Chatterjee: Int. Mater. Rev., 2020, vol. 66, pp. 114–39.10.1080/09506608.2020.1735829 ↗
15. I. Caha, A. Alves, C. Chirico, A. Pinto, S. Tsipas, E. Gordo, and F. Toptan: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 3256–67.10.1007/s11661-020-05757-6 ↗
16. H. Yilmazer, M. Niinomi, M. Nakai, J. Hieda, Y. Todaka, T. Akahori, and T. Miyazaki: J. Mech. Behav. Biomed. Mater., 2012, vol. 10, pp. 235–45.10.1016/j.jmbbm.2012.02.022 ↗
17. M. Niinomi, M. Nakai, and J. Hieda: Acta Biomater., 2012, vol. 8, pp. 3888–903.10.1016/j.actbio.2012.06.037 ↗
18. M. Kheradmandfard, S.F. Kashani-Bozorg, K.-H. Kang, O.V. Penkov, A.Z. Hanzaki, Y.-S. Pyoun, A. Amanov, and D.-E. Kim: J. Alloys Compd., 2018, vol. 738, pp. 540–49.10.1016/j.jallcom.2017.12.049 ↗
19. M. Ebrahimi and S. Attarilar: Metall. Mater. Trans. A, 2021, vol. 52, pp. 1–11.10.1007/s11661-021-06161-4 ↗
20. A. Sotniczuk and H. Garbacz: Adv. Eng. Mater., 2021, vol. 23, p. 2000909.10.1002/adem.202000909 ↗
21. R.Z. Valiev, E.V. Parfenov, and L.V. Parfenova: Mater. Trans., 2019, vol. 60, pp. 1356–66.10.2320/matertrans.MF201943 ↗
22. K. Sharman, P. Bazarnik, T. Brynk, A.G. Bulutsuz, M. Lewandowska, Y. Huang, and T.G. Langdon: J. Mater. Res. Technol., 2015, vol. 4, pp. 79–83.10.1016/j.jmrt.2014.10.010 ↗
23. M.J. Qarni, G. Sivaswamy, A. Rosochowski, and S. Boczkal: Mater. Des., 2017, vol. 122, pp. 385–402.10.1016/j.matdes.2017.03.015 ↗
24. N. Nayan, G. Singh, T.A. Prabhu, S.V.S.N. Murty, and U. Ramamurty: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 128–46.10.1007/s11661-017-4417-y ↗
25. S. Ozan, J. Lin, W. Weng, Y. Zhang, Y. Li, and C. Wen: Bioact. Mater., 2019, vol. 4, pp. 303–11.10.1016/j.bioactmat.2019.10.007 ↗
26. A. Fattah-Alhosseini, A.R. Ansari, Y. Mazaheri, and M.K. Keshavarz: Mater. Sci. Eng. C., 2017, vol. 71, pp. 771–9.10.1016/j.msec.2016.10.057 ↗
27. J. Li, Y. Bai, Z. Fan, S. Li, Y. Hao, R. Yang, and Y. Gao: J. Mater. Sci. Technol., 2018, vol. 34, pp. 1660–70.10.1016/j.jmst.2018.01.008 ↗
28. K.D. Ralston and N. Birbilis: Corrosion., 2010, vol. 66, p. 75005.10.5006/1.3462912 ↗
29. H. Miyamoto, M. Yuasa, M. Rifai, and H. Fujiwara: Mater. Trans., 2019, vol. 60, pp. 1243–55.10.2320/matertrans.MF201935 ↗
30. D.M. Brunette, P. Tengvall, M. Textor, and P. Thomsen: Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses and Medical Applications, Springer, Berlin, 2012.
31. A. Chojnacka, J. Kawalko, H. Koscielny, J. Guspiel, A. Drewienkiewicz, M. Bieda, W. Pachla, M. Kulczyk, K. Sztwiertnia, and E. Beltowska-Lehman: Appl. Surf. Sci., 2017, vol. 426, pp. 987–94.10.1016/j.apsusc.2017.07.231 ↗
32. I. Dimić, I. Cvijović-Alagić, B. Völker, A. Hohenwarter, R. Pippan, D. Veljović, M. Rakin, and B. Bugarski: Mater. Des., 2016, vol. 91, pp. 340–47.10.1016/j.matdes.2015.11.088 ↗
33. A. Fattah-Alhosseini, O. Imantalab, and G. Ansari: Mater. Sci. Eng. C., 2017, vol. 71, pp. 827–34.10.1016/j.msec.2016.10.072 ↗
34. M.F. Ijaz, Y. Zhukova, A. Konopatsky, S. Dubinskiy, A. Korobkova, Y. Pustov, V. Brailovski, and S. Prokoshkin: J. Alloys Compd., 2018, vol. 748, pp. 51–6.10.1016/j.jallcom.2018.03.033 ↗
35. I. Cvijović-Alagić, Z. Cvijović, S. Mitrović, V. Panić, and M. Rakin: Corros. Sci., 2011, vol. 53, pp. 796–808.10.1016/j.corsci.2010.11.014 ↗
36. J.D.C. Tardelli, C. Bolfarini, and A.C. Dos Reis: J. Trace Elem. Med. Biol., 2020, vol. 62, p. 126618.10.1016/j.jtemb.2020.126618 ↗
37. Z.B. Wang, H.X. Hu, C.B. Liu, and Y.G. Zheng: Electrochim. Acta., 2014, vol. 135, pp. 526–35.10.1016/j.electacta.2014.05.055 ↗
38. X. Chen, K. Shah, S. Dong, L. Peterson, E.C. La Plante, and G. Sant: Dent. Mater., 2020, vol. 36, pp. 431–41.10.1016/j.dental.2020.01.008 ↗
39. G. Peñarrieta-Juanito, M.B. Sordi, B. Henriques, M.E.R. Dotto, W. Teughels, F.S. Silva, R.S. Magini, and J.C.M. Souza: J. Periodontal Res., 2019, vol. 54, pp. 46–52.10.1111/jre.12603 ↗
40. Y. Li and J. Xu: Electrochim. Acta., 2017, vol. 233, pp. 151–66.10.1016/j.electacta.2017.03.015 ↗
41. H.-H. Huang: Biomaterials., 2003, vol. 24, pp. 275–82.10.1016/S0142-9612(02)00315-0 ↗
42. T. Wejrzanowski, M. Lewandowska, and K.J. Kurzydłowski: Image Anal. Stereol., 2010, vol. 29, pp. 1–12.10.5566/ias.v29.p1-12 ↗
43. K. Majchrowicz, Z. Pakieła, T. Brynk, B. Romelczyk-Baishya, M. Płocińska, T. Kurzynowski, and E. Chlebus: Mater. Sci. Eng. A., 2019, vol. 765, p. 138290.10.1016/j.msea.2019.138290 ↗
44. R.M. Molak, M.E. Kartal, Z. Pakiela, and K.J. Kurzydlowski: Mater. Sci. Eng. A., 2016, vol. 651, pp. 810–21.10.1016/j.msea.2015.11.037 ↗
45. T. Brynk, R.M. Molak, M. Janiszewska, and Z. Pakiela: Comput. Mater. Sci., 2012, vol. 64, pp. 157–61.10.1016/j.commatsci.2012.04.034 ↗
46. J.-Y. Gal, Y. Fovet, and M. Adib-Yadzi: Talanta., 2001, vol. 53, pp. 1103–15.10.1016/S0039-9140(00)00618-4 ↗
47. E. Newbrun: J. Dent. Educ., 2001, vol. 65, pp. 1078–83.10.1002/j.0022-0337.2001.65.10.tb03452.x ↗
48. D.K. Yang, P. Cizek, P.D. Hodgson, and C.E. Wen: Acta Mater., 2010, vol. 58, pp. 4536–48.10.1016/j.actamat.2010.05.007 ↗
49. S.V. Zherebtsov, G.S. Dyakonov, A.A. Salem, S.P. Malysheva, G.A. Salishchev, and S.L. Semiatin: Mater. Sci. Eng. A., 2011, vol. 528, pp. 3474–9.10.1016/j.msea.2011.01.039 ↗
50. C. Lan, Y. Wu, L. Guo, and F. Chen: Mater. Sci. Eng. A., 2017, vol. 690, pp. 170–76.10.1016/j.msea.2017.02.045 ↗
51. K. Ozaltin, W. Chrominski, M. Kulczyk, A. Panigrahi, J. Horky, M. Zehetbauer, and M. Lewandowska: J. Mater. Sci., 2014, vol. 49, pp. 6930–36.10.1007/s10853-014-8397-7 ↗
52. Y. Wang, J. Zhao, S. Dai, F. Chen, X. Yu, and Y. Zhang: J. Mech. Behav. Biomed. Mater., 2013, vol. 27, pp. 33–42.10.1016/j.jmbbm.2013.06.006 ↗
53. H. Matsumoto, S. Watanabe, and S. Hanada: J. Alloys Compd., 2007, vol. 439, pp. 146–55.10.1016/j.jallcom.2006.08.267 ↗
54. V.D. Cojocaru, D. Raducanu, T. Gloriant, D.M. Gordin, and I. Cinca: Mater. Sci. Eng. A., 2013, vol. 586, pp. 1–10.10.1016/j.msea.2013.08.010 ↗
55. A. Fattah-Alhosseini, A. Reza Ansari, Y. Mazaheri, M. Karimi, and M. Haghshenas: Mater. Sci. Eng. A., 2017, vol. 688, pp. 218–24.10.1016/j.msea.2017.02.013 ↗
56. M. Niinomi, Y. Liu, M. Nakai, H. Liu, and H. Li: Regen. Biomater., 2016, vol. 3, pp. 173–85.10.1093/rb/rbw016 ↗
57. J. Gao, Y. Huang, D. Guan, A.J. Knowles, L. Ma, D. Dye, and W.M. Rainforth: Acta Mater., 2018, vol. 152, pp. 301–14.10.1016/j.actamat.2018.04.035 ↗
58. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng. A., 1989, vol. 113, pp. 1–41.10.1016/0921-5093(89)90290-6 ↗
59. A.R.V. Nunes, S. Borborema, L.S. Araujo, J. Dille, L. Malet, and L.H. de Almeida: J. Alloys Compd., 2018, vol. 743, pp. 141–45.10.1016/j.jallcom.2018.01.305 ↗
60. C. Lan, Y. Wu, L. Guo, H. Chen, and F. Chen: J. Mater. Sci. Technol., 2018, vol. 34, pp. 788–92.10.1016/j.jmst.2017.04.017 ↗
61. M. Tane, S. Akita, T. Nakano, K. Hagihara, Y. Umakoshi, M. Niinomi, and H. Nakajima: Acta Mater., 2008, vol. 56, pp. 2856–63.10.1016/j.actamat.2008.02.017 ↗
62. S. Ozan, J. Lin, Y. Zhang, Y. Li, and C. Wen: J. Mater. Res. Technol., 2020, vol. 9, pp. 2308–18.10.1016/j.jmrt.2019.12.062 ↗
63. K. Topolski, T. Brynk, and H. Garbacz: Arch. Civ. Mech. Eng., 2016, vol. 16, pp. 927–34.10.1016/j.acme.2016.07.001 ↗
64. A.E. Medvedev, A. Neumann, H.P. Ng, R. Lapovok, C. Kasper, T.C. Lowe, V.N. Anumalasetty, and Y. Estrin: Mater. Sci. Eng. C., 2017, vol. 71, pp. 483–97.10.1016/j.msec.2016.10.035 ↗
65. Y. Gu, A. Ma, J. Jiang, H. Li, D. Song, H. Wu, and Y. Yuan: Mater. Charact., 2018, vol. 138, pp. 38–47.10.1016/j.matchar.2018.01.050 ↗
66. H. Garbacz, M. Pisarek, and K.J. Kurzydłowski: Biomol. Eng., 2007, vol. 24, pp. 559–63.10.1016/j.bioeng.2007.08.007 ↗
67. J. Lu, Y. Zhang, W. Huo, W. Zhang, Y. Zhao, and Y. Zhang: Appl. Surf. Sci., 2018, vol. 434, pp. 63–72.10.1016/j.apsusc.2017.10.168 ↗
68. A. Stájer, K. Ungvári, I.K. Pelsőczi, H. Polyánka, A. Oszkó, E. Mihalik, Z. Rakonczay, M. Radnai, L. Kemény, and A. Fazekas: J. Biomed. Mater. Res. A., 2008, vol. 87, pp. 450–58.10.1002/jbm.a.31764 ↗
69. Y.J. Bai, Y.B. Wang, Y. Cheng, F. Deng, Y.F. Zheng, and S.C. Wei: Mater. Sci. Eng. C., 2011, vol. 31, pp. 702–11.10.1016/j.msec.2010.12.010 ↗
70. I. Caha, A.C. Alves, P.A.B. Kuroda, C.R. Grandini, A.M.P. Pinto, L.A. Rocha, and F. Toptan: Corros. Sci., 2020, vol. 167, p. 108488.10.1016/j.corsci.2020.108488 ↗
71. N.T.C. Oliveira and A.C. Guastaldi: Acta Biomater., 2009, vol. 5, pp. 399–405.10.1016/j.actbio.2008.07.010 ↗
72. J. Lu, Y. Zhao, H. Niu, Y. Zhang, Y. Du, W. Zhang, and W. Huo: Mater. Sci. Eng. C., 2016, vol. 62, pp. 36–44.10.1016/j.msec.2016.01.019 ↗
73. D. Mareci, R. Chelariu, D.-M. Gordin, G. Ungureanu, and T. Gloriant: Acta Biomater., 2009, vol. 5, pp. 3625–39.10.1016/j.actbio.2009.05.037 ↗
74. I. Milošev, B. Kapun, and V.S. Šelih: Acta Chim. Slov., 2013, vol. 60, pp. 543–55.
75. P.F. Ji, B. Li, B.H. Chen, F. Wang, W. Ma, X.Y. Zhang, M.Z. Ma, and R.P. Liu: Corros. Sci., 2020, vol. 170, art. no. 108696.10.1016/j.corsci.2020.108696 ↗
76. Z. Jiang, X. Dai, T. Norby, and H. Middleton: Corros. Sci., 2011, vol. 53, pp. 815–21.10.1016/j.corsci.2010.11.015 ↗
77. I. Milošev, T. Kosec, and H.-H. Strehblow: Electrochim. Acta., 2008, vol. 53, pp. 3547–58.10.1016/j.electacta.2007.12.041 ↗
78. M.-K. Han, M.-J. Hwang, M.-S. Yang, H.-S. Yang, H.-J. Song, and Y.-J. Park: Mater. Sci. Eng. A., 2014, vol. 616, pp. 268–74.10.1016/j.msea.2014.08.010 ↗
79. S. Acharya, A.G. Panicker, D.V. Laxmi, S. Suwas, and K. Chatterjee: Mater. Des., 2019, vol. 164, p. 107555.10.1016/j.matdes.2018.107555 ↗
80. R. Huang and Y. Han: Mater. Sci. Eng. C., 2013, vol. 33, pp. 2353–59.10.1016/j.msec.2013.01.068 ↗
81. J. Li, S.J. Li, Y.L. Hao, H.H. Huang, Y. Bai, Y.Q. Hao, Z. Guo, J.Q. Xue, and R. Yang: Acta Biomater., 2014, vol. 10, pp. 2866–75.10.1016/j.actbio.2014.02.032 ↗
82. A. Sotniczuk, D. Kuczyńska-Zemła, A. Królikowski, and H. Garbacz: Corros. Sci., 2019, vol. 147, pp. 342–49.10.1016/j.corsci.2018.11.016 ↗