A Melt Pool Temperature Model in Laser Powder Bed Fabricated CM247LC Ni Superalloy to Rationalize Crack Formation and Microstructural Inhomogeneities
Source abstract
Abstract
Abstract This study of the laser powder bed fusion (LPBF) of γ′-strengthened Ni superalloy CM247LC focuses on the development of a melt pool temperature model to predict crack density within the alloy. This study also analyzes spatter and elemental evaporation, which might cause defects and inhomogeneities, at different melt pool temperatures. The melt pool temperature model provides more accurate predictions than the widely used energy density model. Spatter particles were collected and characterized to study their sizes and chemical compositions, compared with the virgin powder, recycled powder, and as-built samples, to probe the impact of their entrapment into the melt pool. This study also investigated Al evaporation, revealing that its extent does not correlate with the laser energy density and is believed to be rather limited by comparing the chemistry of the virgin powder and the build. Last, the impact of LPBF process parameters on the formation of these inhomogeneities, and accordingly crack formation, was studied using finite element analysis by estimating the maximum melt pool temperature and correlating it with the formation of the microstructural inhomogeneities. The morphology of the various cracking modes was associated with the process parameters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. M. Zhong, H. Sun, W. Liu, X. Zhu, and J. He: Scripta Mater., 2005, vol. 53(2), pp. 159–64.10.1016/j.scriptamat.2005.03.047 ↗
2. B. Geddes, H. Leon, and X. Huang: Superalloys: Alloying and Performance, ASM International, Materials Park, 2010.10.31399/asm.tb.sap.9781627083133 ↗
3. A. Seidel, T. Finaske, A. Straubel, H. Wendrock, T. Maiwald, M. Riede, E. Lopez, F. Brueckner, and C. Leyens: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 3812–30.10.1007/s11661-018-4777-y ↗
4. L.N. Carter, K. Essa, and M.M. Attallah: Rapid Prototyp. J., 2015, vol. 21(4), pp. 423–32.10.1108/RPJ-06-2013-0063 ↗
5. S. Catchpole-Smith, N. Aboulkhair, L. Parry, C. Tuck, I.A. Ashcroft, and A. Clare: Addit. Manuf., 2017, vol. 15, pp. 113–22.
6. I. Todd: Nature., 2017, vol. 549(7672), pp. 342–3.10.1038/549342a ↗
7. J.H. Boswell, D. Clark, W. Li, and M.M. Attallah: Mater. Des., 2019, vol. 174, p. 15.10.1016/j.matdes.2019.107793 ↗
8. H. Kazempour-Liasi, M. Tajally, and H. Abdollah-Pour: Int. J. Miner. Metall. Mater., 2020, vol. 27(6), pp. 764–73.10.1007/s12613-019-1954-y ↗
9. X. Wang: Improving the Microstructure, Mechanical Properties & Process Route in Selective Laser Melting of Nickel-Superalloys, University of Birmingham, Birmingham, 2018.
10. D. Tomus, T. Jarvis, X. Wu, J. Mei, P. Rometsch, E. Herny, J.F. Rideau, and S. Vaillant: Phys. Proc., 2013, vol. 41, pp. 823–7.10.1016/j.phpro.2013.03.154 ↗
11. L.N. Carter, M.M. Attallah, and R.C. Reed: Superalloys., 2012, vol. 2012(6), pp. 577–86.10.7449/2012/Superalloys_2012_577_586 ↗
12. V. Juechter, T. Scharowsky, R.F. Singer, and C. Körner: Acta Mater., 2014, vol. 76, pp. 252–8.10.1016/j.actamat.2014.05.037 ↗
13. R. Duan, S. Li, B. Cai, Z. Tao, W. Zhu, F. Ren, and M.M. Attallah: Compos. Part B Eng., 2021, vol. 222, p. 1.10.1016/j.compositesb.2021.109059 ↗
14. S.A. Khairallah, A.T. Anderson, A. Rubenchik, and W.E. King: Acta Mater., 2016, vol. 108, pp. 36–45.10.1016/j.actamat.2016.02.014 ↗
15. V. Gunenthiram, P. Peyre, M. Schneider, M. Dal, F. Coste, I. Koutiri, and R. Fabbro: J. Mater. Process. Technol., 2018, vol. 251, pp. 376–86.10.1016/j.jmatprotec.2017.08.012 ↗
16. A.B. Anwar and Q.-C. Pham: Addit. Manuf., 2018, vol. 22, pp. 86–97.
17. G. Repossini, V. Laguzza, M. Grasso, and B.M. Colosimo: Addit. Manuf., 2017, vol. 16, pp. 35–48.
18. R. O’Leary, R. Setchi, P. Prickett, G. Hankins, and N. Jones: InImpact J. Innov. Impact., 2016, vol. 8(2), pp. 377–88.
19. H.P. Tang, M. Qian, N. Liu, X.Z. Zhang, G.Y. Yang, and J. Wang: JOM., 2015, vol. 67(3), pp. 555–63.10.1007/s11837-015-1300-4 ↗
20. L.N. Carter, X. Wang, N. Read, R. Khan, M. Aristizabal, K. Essa, and M.M. Attallah: Mater. Sci. Technol., 2016, vol. 67(3), pp. 1–5.
21. Y. Liu, J. Zhang, and Z. Pang: Opt. Laser Technol., 2018, vol. 98, pp. 23–32.10.1016/j.optlastec.2017.07.034 ↗
22. Y.H. Zhou, Z.H. Zhang, Y.P. Wang, G. Liu, S.Y. Zhou, Y.L. Li, J. Shen, and M. Yan: Addit. Manuf., 2019, vol. 25, pp. 204–17.
23. H.J. Willy, X. Li, Z. Chen, T.S. Herng, S. Chang, C.Y.A. Ong, C. Li, and J. Ding: Mater. Des., 2018, vol. 157, pp. 24–34.10.1016/j.matdes.2018.07.029 ↗
24. A. Hussein, L. Hao, C. Yan, and R. Everson: Mater. Des., 2013, vol. 52, pp. 638–47.10.1016/j.matdes.2013.05.070 ↗
25. L.N. Carter: Selective Laser Melting of Nickel Superalloys For High Temperature Applications, University of Birmingham, Birmingham, 2013.
26. S.S. Sih and J.W. Barlow: Measurement and Prediction of the Thermal Conductivity of Powders at High Temperatures, Solid Freeform Fabrication Proc, Austin, 1994.
27. F. Shen, Y. Wang, J. Yao, and J.L. Yang: J. Sichuan Univ., 2005, vol. 37, pp. 47–51.
28. X. Wang, L.N. Carter, B. Pang, M.M. Attallah, and M.H. Loretto: Acta Mater., 2017, vol. 128, pp. 87–95.10.1016/j.actamat.2017.02.007 ↗
29. X. Wang, N. Read, L.N. Carter, R.M. Ward, and M.M. Attallah: Defect Formation and Its Mitigation in Selective Laser Melting of High γ’ Ni‐Base Superalloys. Superalloys 2016: Proc 13th Int. Symp. of Superalloys, Hoboken, NJ, 2016.10.1002/9781119075646.ch38 ↗
30. D. Wang, S. Wu, F. Fu, S. Mai, Y. Yang, Y. Liu, and C. Song: Mater. Des., 2017, vol. 117, pp. 121–30.10.1016/j.matdes.2016.12.060 ↗
31. Y. Liu, Y. Yang, S. Mai, D. Wang, and C. Song: Mater. Des., 2015, vol. 87, pp. 797–806.10.1016/j.matdes.2015.08.086 ↗
32. S. Paterl, P. Reddy, and A. Kumar: Int. J. Heat Mass Transfer., 2021, vol. 164, p. 120575.10.1016/j.ijheatmasstransfer.2020.120575 ↗
33. B. Dikshit, G.R. Zende, M.S. Bhatia, and B.M. Suri: Phys. Fluids., 2009, vol. 21(8), p. 1196.10.1063/1.3210763 ↗
34. L.N. Carter, C. Martin, P.J. Withers, and M.M. Attallah: J. Alloys Compd., 2014, vol. 615, pp. 338–47.10.1016/j.jallcom.2014.06.172 ↗