journal article·2021-07

The High-Strain-Rate Constitutive Behavior and Shear Response of Pure Magnesium and AZ31B Magnesium Alloy

E. K. Cerreta, S. J. Fensin, S. J. Perez-Bergquist, C. P. Trujillo, B. M. Morrow, M. F. Lopez, C. J. Roach, S. N. Mathaudhu, V. Anghel, G. T. Gray

Publisher page

Abstract

The high-strain-rate response of pure magnesium and AZ31B magnesium alloy is examined in compression and in a forced shear-loading top-hat configurations. Compression specimens loaded in the direction normal to the plane of the rolled plate (TT) display higher-strain-rate sensitivity than specimens that were loaded within the plane of the rolled plate (IP). This effect is more pronounced for pure magnesium as compared to the alloy, due to increased twinning in the IP direction as compared to the TT. Additionally, top-hat shear specimens loaded at high strain rates are observed to display stable deformation during loading, and the development of adiabatic shear bands is not observed. We hypothesize that this result is due to adiabatic heating during deformation, which enhanced the contribution of slip, lessened the role twinning, and possibly activated dynamic recrystallization processes, thus, preventing the formation of distinct shear bands.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. M. Easton, A. Beer, M. Barnett, C. Davies, G. Dunlop, Y. Durandet, S. Blacket, T. Hilditch, and P. Beggs: JOM-US., 2008, vol. 60, p. 57.10.1007/s11837-008-0150-8 ↗
2. S.R. Agnew: J. Met., 2004, vol. 56, pp. 20–1.
3. T. Hilditch, D. Atwell, M. Easton, and M. Barnett: Mater. Des., 2009, vol. 30, pp. 2316–22.10.1016/j.matdes.2008.11.020 ↗
4. M.G. Lee, R.H. Wagoner, J.K. Lee, K. Chung, and H.Y. Kim: Int. J. Plasticity., 2008, vol. 24, pp. 545–82.10.1016/j.ijplas.2007.05.004 ↗
5. J.W. Christian and S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–157.10.1016/0079-6425(94)00007-7 ↗
6. E.W. Kelley and W.F. Hosford: Trans. AIME., 1968, vol. 242, pp. 5–13.
7. D.H. Avery and W.F. Hosford: Trans. AIME., 1965, vol. 233, pp. 71–8.
8. M.H. Yoo and J.K. Lee: Philos. Mag. A. Phys. Condens. Matter Defects Mech. Prop., 1991, vol. 63, pp. 987–1000.
9. A. Akhtar and A. Teghtsoonian: Acta Metall., 1971, vol. 19, pp. 655–63.10.1016/0001-6160(71)90019-8 ↗
10. U.F. Kocks and D.G. Westlake: Trans. Metall. Soc. AIME., 1967, vol. 239, pp. 1107–9.
11. I.J. Beyerlein, L. Capolungo, P.E. Marshall, R.J. McCabe, and C.N. Tome: Philos. Mag., 2010, vol. 90, pp. 4073–4.10.1080/14786435.2010.517966 ↗
12. B.M. Morrow, R.W. Kozar, K.R. Anderson, and M.J. Mills: Acta Mater., 2013, vol. 61, pp. 4452–60.10.1016/j.actamat.2013.04.014 ↗
13. B.M. Morrow, E.K. Cerreta, R.J. McCabe, and C.M. Tomé: Mater. Sci. Eng., A., 2014, vol. 613, pp. 365–71.10.1016/j.msea.2014.06.062 ↗
14. E Lilleodden, L. Mosler, M. Homayonifar, M. Nebebe, G. Kim, and N. Huber: in Magnesium Technology, ed. W.H. Sillekens, S.R. Agnew, N.R. Neelameggham, and S.N. Mathaudhu, Wiley Online Library, 2011.
15. X.Y. Lou, M. Li, R.K. Boger, S.R. Agnew, and R.H. Wagoner: Int. J. Plasticity., 2007, vol. 323, pp. 44–86.10.1016/j.ijplas.2006.03.005 ↗
16. M.H. Yoo, J.R. Morris, K.M. Ho, and S.R. Agnew: Metall. Mater. Trans. A., 2002, vol. 33A, pp. 812–22.
17. S.R. Agnew, C.N. Tome, D.W. Brown, T.M. Holden, and S.C. Vogel: Scripta Mater., 2003, vol. 48, pp. 1003–8.10.1016/S1359-6462(02)00591-2 ↗
18. P.G. Patridge: Met. Rev., 1967, vol. 12, pp. 169–94.10.1179/imr.1967.12.1.169 ↗
19. E. Reed-Hill and W.D. Robertson: Acta Mater., 1957, vol. 5, pp. 728–37.10.1016/0001-6160(57)90075-5 ↗
20. H. Yohinaga and R. Horiuchi: Mater. Trans. JIM., 1963, vol. 4, pp. 134–41.10.2320/matertrans1960.4.134 ↗
21. M.R. Barnett: Mater. Sci. Eng. A Struct., 2007, vol. 464, pp. 1–7.10.1016/j.msea.2006.12.037 ↗
22. A. Jain, O. Duygulu, D.W. Brown, C.N. Tome, and S.R. Agnew: Mater. Sci. Eng. A., 2008, vol. 486, pp. 545–55.10.1016/j.msea.2007.09.069 ↗
23. Q. Dai, D. Zhang, and X. Chen: Mater. Des., 2011, vol. 32, pp. 5004–9.10.1016/j.matdes.2011.06.017 ↗
24. C.D. Barrett, M.A. Tschopp, H. El Kadiri, and B. Li: in TMS, ed. W.H. Sillekens, S.R. Agnew, N.R. Neelameggham, and S.N. Mathaudhu, Wiley Online Library, 2011.
25. R. Korla and A.H. Chokshi: Scripta Mater., 2010, vol. 63, pp. 913–6.10.1016/j.scriptamat.2010.06.047 ↗
26. H. Watanabe and K. Ishikawa: Mater. Sci. Eng. A., 2009, vol. 523, pp. 304–11.10.1016/j.msea.2009.06.019 ↗
27. I. Ulacia, N.V. Dudamell, F. Gálvez, S. Yi, M.T. Pérez-Prado, and I. Hurtado: Acta Mater., 2010, vol. 58, pp. 2988–98.10.1016/j.actamat.2010.01.029 ↗
28. E. Karimi, A. Zarei-Hanzaki, M.H. Pishbin, H.R. Abedi, and P. Changizian: Mater. Des., 2013, vol. 49, pp. 173–80.10.1016/j.matdes.2013.01.068 ↗
29. A.S. Khan, A. Pandey, T. Gnäupel-Herold, and R.K. Mishra: Int. J. Plasticity., 2011, vol. 27, pp. 688–706.10.1016/j.ijplas.2010.08.009 ↗
30. S. Kurukuri, M.J. Worswick, D.G. Tari, R.K. Mishra, and J.T. Carter: Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 2014, vol. 372, p. 20130216.10.1098/rsta.2013.0216 ↗
31. A. Pandey, F. Kabirian, J.-H. Hwang, S.-H. Choi, and A.S. Khan: Int. J. Plasticity., 2015, vol. 68, pp. 111–31.10.1016/j.ijplas.2014.12.001 ↗
32. R.A. Lebensohn and C.N. Tome: Philos. Mag. A Phys. Condens. Matter Defects Mech. Prop., 1991, vol. 63, pp. 1116–1116.
33. A. Staroselsky and L. Anand: Int. J. Plasticity., 2003, vol. 19, pp. 1843–64.10.1016/S0749-6419(03)00039-1 ↗
34. T. Mayama, K. Ohashi, K. Higashida and Y. Kawamura, In TMS, ed. W.H. Sillekens, S.R. Agnew, N.R. Neelameggham, and S.N. Mathaudhu, Wiley Online Library, 2011.
35. Y. Tadano: in TMS, ed. W.H. Sillekens, S.R. Agnew, N.R. Neelameggham, and S.N. Mathaudhu, Wiley Online Library, 2011.
36. M. Knezevic, A. Levinson, R. Harris, R.K. Mishra, R.D. Doherty, and S.R. Kalidindi: Acta Mater., 2010, vol. 58, pp. 6230–42.10.1016/j.actamat.2010.07.041 ↗
37. S.R. Agnew and O. Duygulu: Int. J. Plasticity., 2005, vol. 21, pp. 1161–93.10.1016/j.ijplas.2004.05.018 ↗
38. G. Proust, C.N. Tomé, A. Jain, and S.R. Agnew: Int. J. Plasticity., 2009, vol. 25, pp. 861–80.10.1016/j.ijplas.2008.05.005 ↗
39. L. Li, O. Muránsky, E.A. Flores-Johnson, S. Kabra, L. Shen, and G. Proust: Mater. Sci. Eng. A., 2017, vol. 684, pp. 37–46.10.1016/j.msea.2016.12.015 ↗
40. F. Kabirian, A.S. Khan, and T. Gnäupel-Herlod: Int. J. Plasticity., 2015, vol. 68, pp. 1–20.10.1016/j.ijplas.2014.10.012 ↗
41. M. Al-Maharbi, I. Karaman, I. J. Beyerlein, D. Foley, K.T. Hartwig, L.J. Kecskes, and S.N. Mathaudhu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7616–27.10.1016/j.msea.2011.06.043 ↗
42. M. Al-Maharbi, I. Karaman, I.J. Beyerlein, D. Foley, K.T. Hartwig, L.J. Kecskes, and S.N. Mathaudhu: Mater. Sci. Eng. A Struct., 2011, vol. 528, pp. 7616–27.10.1016/j.msea.2011.06.043 ↗
43. K. Atik and M. Efe: Mater. Sci. Eng. A Struct., 2018, vol. 725, pp. 267–73.10.1016/j.msea.2018.03.121 ↗
44. M. Ardeljan and M. Knezevic: Acta Mater., 2018, vol. 157, pp. 339–54.10.1016/j.actamat.2018.07.045 ↗
45. S. Wang, S.B. Kang, J. Cho, P. Guo, and L. Yang: J. Eng. Mater. Technol., 2012, vol. 134, pp. 041002-1-041005–5.
46. T. Mukai, M. Yamanoi, H. Watanabe, and K. Higashi: Scripta Mater., 2001, vol. 45, pp. 89–94.10.1016/S1359-6462(01)00996-4 ↗
47. A. Jain and S.R. Agnew: Mater. Sci. Eng. A., 2007, vol. 462, pp. 29–36.10.1016/j.msea.2006.03.160 ↗
48. S. Sandlobes, M. Friak, S. Zaefferer, A. Dick, S. Yi, D. Letzig, Z. Pei, L.F. Zhu, J. Neugebauer, and D. Raabe: Acta Mater., 2012, vol. 60, pp. 3011–21.10.1016/j.actamat.2012.02.006 ↗
49. T. Mukai, M. Yamonoi, H. Watanabe, K. Ishikawa, and K. Higashi: Mater. Trans., 2001, vol. 42, pp. 1177–81.10.2320/matertrans.42.1177 ↗
50. S.R. Agnew, M.H. Yoo, and C.N. Tome: Acta Mater., 2001, vol. 49, pp. 4277–89.10.1016/S1359-6454(01)00297-X ↗
51. H. Somekawa, A. Singh, R. Sahara, and T. Inoue: Sci. Rep., 2018, vol. 8, p. 656.10.1038/s41598-017-19124-w ↗
52. M. Nebebe-Mekonen, D. Steglich, J. Bohlen, D. Letzig, and J. Mosler: Mater. Sci. Eng. A., 2012, vol. 540, pp. 174–86.10.1016/j.msea.2012.01.122 ↗
53. T. Aramoto, H. Tachiya, A. Hori, A. Hojo, and Y. Miyazaki: Int. J. Mod. Phys. B., 2008, vol. 22, pp. 1135–40.10.1142/S0217979208046438 ↗
54. H.Y. Wu, J.C. Yang, J.H. Liao, and F.J. Zhu: Mater. Sci. Eng. A., 2012, vol. 535, pp. 68–75.10.1016/j.msea.2011.12.043 ↗
55. T. Yokoyama: J. Phys. IV., 2003, vol. 110, pp. 69–74.
56. V. Livescu, C.M. Cady, E.K. Cerreta, B.L. Henrie, and G.T. Gray III: in TMS, ed. A.A. Luo, N.R. Neelamegghhham, and R.S. Beals, San Antonio, TX, 2006, pp. 153–58.
57. K.E. Prasad, B. Li, N. Dixit, M. Shaffer, S.N. Mathaudhu, and K.T. Ramesh: JOM-US., 2014, vol. 66, pp. 291–304.10.1007/s11837-013-0850-6 ↗
58. D.J. Savage, B.A. McWilliams, S.C. Vogel, C.P. Trujillo, I.J. Beyerlein, and M. Knezevic: Int. J. Impact Eng., 2020, vol. 143, p. 103589.10.1016/j.ijimpeng.2020.103589 ↗
59. K.H. Eckelmeyer and R.W. Hertzberg: Metall. Trans., 1970, vol. 1, pp. 3411–4.10.1007/BF03037872 ↗
60. P. Klimanek and A. Potzsch: Mater. Sci. Eng., A., 2002, vol. 324, pp. 145–50.10.1016/S0921-5093(01)01297-7 ↗
61. H. Asgari, J.A. Szpunar, and A.G. Odeshi: Mater. Des., 2014, vol. 61, pp. 26–34.10.1016/j.matdes.2014.04.049 ↗
62. X.Q. Guo, A. Chapuis, P.D. Wu, and S.R. Agnew: Int. J. Solids Struct., 2015, vol. 64–65, pp. 42–50.10.1016/j.ijsolstr.2015.03.012 ↗
63. G.S.S. Rao and K.L. Murty: Res. Mech., 1988, vol. 23, pp. 363–80.
64. M.A. Gharghouri, G.C. Weatherly, J.D. Embury, and J. Root: Philos. Mag. A., 1999, vol. 79, p. 1671.10.1080/01418619908210386 ↗
65. I. Ulacia, N.V. Dudamell, F. Galvez, S. Yi, M.T. Perez-Prado, and I. Hurtado: Acta Mater., 2010, vol. 58, pp. 2988–98.10.1016/j.actamat.2010.01.029 ↗
66. N.V. Dudamell, I. Ulacia, F. Galvez, S. Yi, J. Bohlen, D. Letzig, I. Hurtado, and M.T. Perez-Prado: Acta Mater., 2011, vol. 59, pp. 6949–62.10.1016/j.actamat.2011.07.047 ↗
67. I. Ulacia, C.P. Salisbury, I. Hurtado, and M.J. Worswick: J. Mater. Process. Technol., 2011, vol. 211, pp. 830–9.10.1016/j.jmatprotec.2010.09.010 ↗
68. Q. Li: Mater. Sci. Eng. A., 2012, vol. 540, pp. 130–4.10.1016/j.msea.2012.01.116 ↗
69. S.R. Agnew, J.A. Horton, T.M. Lillo, and D.W. Brown: Scripta Mater., 2004, vol. 50, pp. 377–81.10.1016/j.scriptamat.2003.10.006 ↗
70. D.W. Brown, S.R. Agnew, M.A.M. Bourke, T.M. Holden, S.C. Vogel, and C.N. Tome: Mater. Sci. Eng. A., 2005, vol. 399, pp. 1–12.10.1016/j.msea.2005.02.016 ↗
71. U.S. Lindholm: J. Mech. Phys. Solids., 1964, vol. 12, pp. 317–35.10.1016/0022-5096(64)90028-6 ↗
72. P.S. Follansbee: in ASM Handbook, American Society for Metals, Metals Park, OH, 1985, pp. 198–203.
73. G.T. Gray III: ASM Handbook, vol. 8, 2000, pp. 462–76.
74. M.A. Meyers, L.W. Meyer, J. Beatty, U. Andrada, K.S. Vecchio and A.H. Chokshi, Shock Waves and High-Strain-Rate Phenomena in Materials, ed. M.A. Meyers, L.E. Murr, and K.P. Staudhammer, Marcel Dekker, New York, 1992, p. 529.
75. J.H. Beatty, L.W. Meyer, M.A. Meyers, and S. Nemat-Nasser: in High-Strain-Rate Phenomena in Materials, ed. M.A. Meyers, L.E. Murr, and K.P. Staudhammer, Marcel Dekker, New York, 1992, p. 645.
76. K.H. Hartman, H.D. Kunze, and L.W. Meyer: in International Conference on Metallurgical Effects of High-Strain-Rate Deformation and Fabrication, ed. M.A. Meyers and L.E. Murr, Plenum Press, New York, 1980, p. 325.10.1007/978-1-4613-3219-0_21 ↗
77. M. Jahedi, B.A. McWilliams, F.R. Kellogg, I.J. Beyerlein, and M. Knezevic: Mater. Sci. Eng. A., 2018, vol. 712, pp. 50–64.10.1016/j.msea.2017.11.092 ↗
78. E.K. Cerreta and G.T. GrayIII: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2004, vol. 35, pp. 1999–2011.10.1007/s11661-004-0149-x ↗
79. R.E. Reed-Hill: Inhomogeneity of Plastic Deformation (ASM, Metals Park, OH, 1973).
80. G.T. Gray III.: Annu. Rev. Mater. Res., 2012, vol. 42, pp. 285–303.10.1146/annurev-matsci-070511-155034 ↗
81. Y. Wang, F. Yang, C. Tan, Y. Wu, and H. Cai: Trans. Nonferrous Met. Soc. China, 2008, vol. 18, pp. 1043–46.10.1016/S1003-6326(08)60178-8 ↗
82. M.T. Tucker, M.F. Horstemeyer, P.M. Gullett, H. El Kadiri, and W.R. Whittington: Scripta Mater., 2009, vol. 60, pp. 182–5.10.1016/j.scriptamat.2008.10.011 ↗
83. Q.Z. Li: Mater. Sci. Eng. A Struct., 2012, vol. 540, pp. 130–4.10.1016/j.msea.2012.01.116 ↗
84. P.L. Mao, L. Zheng, C.Y. Wang, and Z. Wang: Mater. Sci. Forum., 2011, vol. 686, pp. 325–31.10.4028/www.scientific.net/MSF.686.325 ↗
85. L.M. Dougherty, E.K. Cerreta, G.T. Gray III., C.P. Trujillo, M.F. Lopez, K.S. Vecchio, and G.J. Kusinski: Metall. Mater. Trans. A., 2009, vol. 40A, pp. 1835–50.10.1007/s11661-009-9869-2 ↗
86. A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field: Electron Backscatter Diffraction in Materials Science, Springer, New York, 2009, p. 255.10.1007/978-0-387-88136-2 ↗
87. M. Stelly and R. Dormeval: in Metallurgical Applications of Shock-Wave and High Strain Rate Phenomena, ed. L.E. Murr, K.P. Staudhammer, and M.A. Meyers, Marcel Dekker, New York, 1986, pp. 607–32.
88. T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A., 2008, vol. 490, pp. 411–20.10.1016/j.msea.2008.02.004 ↗
89. L. Jiang, Y. Yang, Z. Wang, and Hu. Haibo: Mater. Sci. Eng. A., 2018, vol. 711, pp. 317–24.10.1016/j.msea.2017.10.111 ↗
90. J. Zhang and S.P. Joshi: J. Mech. Phys. Solids., 2012, vol. 60, pp. 945–72.10.1016/j.jmps.2012.01.005 ↗
91. J.F. Bingert, T.A. Mason, G.C. Kaschner, P.J. Maudlin, and G.T. Gray III.: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2002, vol. 33, pp. 955–63.10.1007/s11661-002-0165-7 ↗
92. A. Serra and D.J. Bacon: Philos. Mag. A Phys. Condens. Matter Struct. Defects Mech. Prop., 1996, vol. 73, pp. 333–43.
93. Y. Li, P. Mao, Z. Liu, F. Wang, and Z. Wang: Acta Metall Sin., 2018, vol. 54, pp. 950–8.
94. E.K. Cerreta, G.T. Gray III, A.C. Lawson, T.A. Mason, and C.E. Morris: J. Appl. Phys., 2006, vol. 100, p. 013530(9).10.1063/1.2209540 ↗
95. E. Cerreta, G.T. Gray III., R. Hixson, P.A. Rigg, and D.W. Brown: Acta Mater., 2005, vol. 53, pp. 1751–8.10.1016/j.actamat.2004.12.024 ↗
96. M.R. Barnett: J. Light Met., 2001, vol. 1, pp. 167–77.10.1016/S1471-5317(01)00010-4 ↗
97. A. Chapuis and Q. Liu: J. Magnesium Alloys., 2019, vol. 7, pp. 433–43.10.1016/j.jma.2019.04.004 ↗
98. D.C. Foley, M. Al-Maharbi, K.T. Hartwig, I. Karaman, L.J. Kecskes, and S.N. Mathaudhu: Scripta Mater., 2011, vol. 64, pp. 193–6.10.1016/j.scriptamat.2010.09.042 ↗
99. E.W. Kelley and W.F. Hosford: Ph.D. Thesis, The University of Michigan, 1967.
100. H. Fan and J.A. El-Awady: Mater. Sci. Eng. A., 2015, vol. 644, pp. 318–24.10.1016/j.msea.2015.07.080 ↗