journal article·2021-06Open access

Microstructure-Based Estimation of Strength and Ductility Distributions for $$\alpha +\beta $$ Titanium Alloys

McLean P. Echlin, Matthew Kasemer, Kamalika Chatterjee, Donald Boyce, Jean Charles Stinville, Patrick G. Callahan, Euan Wielewski, Jun-Sang Park, James C. Williams, Robert M. Suter, Tresa M. Pollock, Matthew P. Miller, Paul R. Dawson

Abstract

Titanium alloys are processed to develop a wide range of microstructure configurations and therefore material properties. While these properties are typically measured experimentally, a framework for property prediction could greatly enhance alloy design and manufacturing. Here a microstructure-sensitive framework is presented for the prediction of strength and ductility as well as estimates of the bounds in variability for these properties. The framework explicitly considers distributions of microstructure via new approaches for instantiation of structure in synthetic samples. The parametric evaluation strategy, including the finite element simulation package FEpX, is used to create and test virtual polycrystalline samples to evaluate the variability bounds of mechanical properties in Ti-6Al-4V. Critical parameters for the property evaluation framework are provided by measurements of single crystal properties and advanced characterization of microstructure and slip system strengths in 2D and 3D. Property distributions for yield strength and ductility are presented, along with the validation and verification steps undertaken. Comparisons between strain localization and slip activity in virtual samples and in experimental grain-scale strain measurements are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (96)

Show source-provided references
1. G. Lütjering and J.C. Williams: Titanium. Engineering Materials and Processes, Springer, Berlin, Heidelberg, 2007. https://books.google.com/books?id=c9iR1Lm43GEC.
2. R.R. Boyer: Mater. Sci. Eng. A 213(1–2), 103 (1996). https://doi.org/10.1016/0921-5093(96)10233-110.1016/0921-5093(96)10233-1 ↗
3. I. Weiss, S.L. Semiatin, Mater. Sci. Eng. A 263(2), 243–256 (1999). https://doi.org/10.1016/s0921-5093(98)01155-110.1016/s0921-5093(98)01155-1 ↗
4. B. Dutta, F.H.S. Froes, Titanium Powder Metallurgy (Elsevier, New York, 2015), pp. 447–468. https://doi.org/10.1016/b978-0-12-800054-0.00024-110.1016/b978-0-12-800054-0.00024-1 ↗
5. W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, S.S. Babu, Int. Mater. Rev. 61(5), 315–360 (2016). https://doi.org/10.1080/09506608.2015.111664910.1080/09506608.2015.1116649 ↗
6. H.M. Flower, Mater. Sci. Technol. 6(11), 1082–1092 (1990). https://doi.org/10.1179/mst.1990.6.11.108210.1179/mst.1990.6.11.1082 ↗
7. J.C. Williams, R.R. Boyer, Metals 10(6), 705 (2020). https://doi.org/10.3390/met1006070510.3390/met10060705 ↗
8. M.J. Donachie, Titanium: A Technical Guide, 2nd Edition. Ingenieria e ingenieria civil, ASM International, 2000. https://books.google.com/books?id=HgzukknbNGAC.10.31399/asm.tb.ttg2.9781627082693 ↗
9. Y. Xu, S. Joseph, P. Karamched, K. Fox, D. Rugg, F.P.E. Dunne, D. Dye, Nat. Commun. 11, 1 (2020). https://doi.org/10.1038/s41467-020-19470-w10.1038/s41467-020-19470-w ↗
10. Z. Zhang, F.P.E. Dunne, J. Mech. Phys. Solids 103, 199–220 (2017). https://doi.org/10.1016/j.jmps.2017.03.01210.1016/j.jmps.2017.03.012 ↗
11. Z. Zheng, D.S. Balint, F.P.E. Dunne, J. Mech. Phys. Solids 107, 185–203 (2017). https://doi.org/10.1016/j.jmps.2017.07.01010.1016/j.jmps.2017.07.010 ↗
12. B.D. Smith, D.S. Shih, D.L. McDowell, Int. J. Plast. 101, 1–23 (2018). https://doi.org/10.1016/j.ijplas.2013.10.00410.1016/j.ijplas.2013.10.004 ↗
13. J. Cappola, J.C. Stinville, M.A. Charpagne, P.G. Callahan, M.P. Echlin, T.M. Pollock, A. Pilchak, M. Kasemer, Acta Mater. 204, 116492 (2021). https://doi.org/10.1016/j.actamat.2020.11649210.1016/j.actamat.2020.116492 ↗
14. A.A. Salem, J.B. Shaffer, D.P. Satko, S.L. Semiatin, S.R. Kalidindi, Integr. Mater. Manuf. Innov. 3(1), 322–343 (2014). https://doi.org/10.1186/s40192-014-0024-610.1186/s40192-014-0024-6 ↗
15. S. Hémery, A. Nait-Ali, P. Villechaise, Mech. Mater. 109, 1–10 (2017). https://doi.org/10.1016/j.mechmat.2017.03.01310.1016/j.mechmat.2017.03.013 ↗
16. A. Nait-Ali, S. Hémery, M. Gueguen, Int. J. Solids Struct. (2021). https://doi.org/10.1016/j.ijsolstr.2021.01.00810.1016/j.ijsolstr.2021.01.008 ↗
17. V. Tari, R.A. Lebensohn, R. Pokharel, T.J. Turner, P.A. Shade, J.V. Bernier, A.D. Rollett, Acta Mater. 154, 273–283 (2018). https://doi.org/10.1016/j.actamat.2018.05.03610.1016/j.actamat.2018.05.036 ↗
18. J. Wang, M. Zecevic, M. Knezevic, I.J. Beyerlein, Int. J. Plast. 125, 294–313 (2020). https://doi.org/10.1016/j.ijplas.2019.09.01310.1016/j.ijplas.2019.09.013 ↗
19. D. Ozturk, S. Kotha, A.L. Pilchak, S. Ghosh, JOM 71(8), 2657–2670 (2019). https://doi.org/10.1007/s11837-019-03554-010.1007/s11837-019-03554-0 ↗
20. S. Kotha, D. Ozturk, S. Ghosh, npj Comput. Mater. (2020). https://doi.org/10.1038/s41524-020-00379-310.1038/s41524-020-00379-3 ↗
21. M.P. Echlin, W.C. Lenthe, T.M. Pollock, Integr. Mater. Manuf. Innov. 3(1), 278–291 (2014). https://doi.org/10.1186/s40192-014-0021-910.1186/s40192-014-0021-9 ↗
22. M.W. Priddy, N.H. Paulson, S.R. Kalidindi, D.L. McDowell, Int. J. Fatigue 104, 231–242 (2017). https://doi.org/10.1016/j.ijfatigue.2017.07.01510.1016/j.ijfatigue.2017.07.015 ↗
23. H.W. Rosenberg, W.D. Nix, Metall. Trans. 4(5), 1333–1338 (1973). https://doi.org/10.1007/bf0264452910.1007/bf02644529 ↗
24. D. Banerjee, J.C. Williams, Acta Mater. 61(3), 844–879 (2013). https://doi.org/10.1016/j.actamat.2012.10.04310.1016/j.actamat.2012.10.043 ↗
25. J.C. Williams, R.G. Baggerly, N.E. Paton, Metall. Mater. Trans. A 33A, 837–850 (2002). https://doi.org/10.1007/s11661-002-0153-y10.1007/s11661-002-0153-y ↗
26. M.P. Echlin, J.C. Stinville, V.M. Miller, W.C. Lenthe, T.M. Pollock, Acta Mater. 114, 164–175 (2016). https://doi.org/10.1016/j.actamat.2016.04.05710.1016/j.actamat.2016.04.057 ↗
27. T.R. Bieler, P. Eisenlohr, C. Zhang, H.J. Phukan, M.A. Crimp, Curr. Opin. Solid State Mater. Sci. 18(4), 212–226 (2014). https://doi.org/10.1016/j.cossms.2014.05.00310.1016/j.cossms.2014.05.003 ↗
28. D. He, J. Zhu, S. Zaefferer, D. Raabe, Mater. Des. (1980–2015) 56, 937–942 (2014). https://doi.org/10.1016/j.matdes.2013.12.01810.1016/j.matdes.2013.12.018 ↗
29. S. Suri, G.B. Viswanathan, T. Neeraj, D.H. Hou, M.J. Mills, Acta Mater. 47(3), 1019–1034 (1999). https://doi.org/10.1016/s1359-6454(98)00364-410.1016/s1359-6454(98)00364-4 ↗
30. M.F. Savage, J. Tatalovich, M. Zupan, K.J. Hemker, M.J. Mills, Mater. Sci. Eng. A 319–321, 398–403 (2001). https://doi.org/10.1016/s0921-5093(01)01024-310.1016/s0921-5093(01)01024-3 ↗
31. S. Hémery, P. Villechaise, D. Banerjee, Metall. Mater. Trans. A (2020). https://doi.org/10.1007/s11661-020-05945-410.1007/s11661-020-05945-4 ↗
32. F. Bridier, P. Villechaise, J. Mendez, Acta Mater. 53(3), 555–567 (2005). https://doi.org/10.1016/j.actamat.2004.09.04010.1016/j.actamat.2004.09.040 ↗
33. J.R. Seal, M.A. Crimp, T.R. Bieler, C.J. Boehlert, Mater. Sci. Eng. A 552, 61–68 (2012). https://doi.org/10.1016/j.msea.2012.04.11410.1016/j.msea.2012.04.114 ↗
34. P.J. Ashton, T.S. Jun, Z. Zhang, T.B. Britton, A.M. Harte, S.B. Leen, F.P. Dunne, Int. J. Fatigue 100, 377–387 (2017). https://doi.org/10.1016/j.ijfatigue.2017.03.02010.1016/j.ijfatigue.2017.03.020 ↗
35. S. Joseph, I. Bantounas, T.C. Lindley, D. Dye, Int. J. Plast. 100, 90–103 (2018). https://doi.org/10.1016/j.ijplas.2017.09.01210.1016/j.ijplas.2017.09.012 ↗
36. S. Hémery, P. Nizou, P. Villechaise, Mater. Sci. Eng. A 709, 277–284 (2018). https://doi.org/10.1016/j.msea.2017.10.05810.1016/j.msea.2017.10.058 ↗
37. Y. Chong, G. Deng, J. Yi, A. Shibata, N. Tsuji, J. Alloys Compd. 811, 152040 (2019). https://doi.org/10.1016/j.jallcom.2019.15204010.1016/j.jallcom.2019.152040 ↗
38. C. de Formanoir, A. Brulard, S. Vivès, G. Martin, F. Prima, S. Michotte, E. Rivière, A. Dolimont, S. Godet, Mater. Res. Lett. (2016). https://doi.org/10.1080/21663831.2016.124568110.1080/21663831.2016.1245681 ↗
39. W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals. Oxford engineering science series. Oxford University Press, Oxford, 1993. https://books.google.com/books?id=LoBrQgAACAAJ.
40. M. Kasemer, M.P. Echlin, J.C. Stinville, T.M. Pollock, P. Dawson, Acta Mater. 136, 288–302 (2017). https://doi.org/10.1016/j.actamat.2017.06.05910.1016/j.actamat.2017.06.059 ↗
41. E. Wielewski, C.R. Siviour, N. Petrinic, Scripta Mater. 67(3), 229–232 (2012). https://doi.org/10.1016/j.scriptamat.2012.04.02610.1016/j.scriptamat.2012.04.026 ↗
42. C. Lavogiez, S. Hémery, P. Villechaise, Scripta Mater. 157, 30–33 (2018). https://doi.org/10.1016/j.scriptamat.2018.07.03310.1016/j.scriptamat.2018.07.033 ↗
43. G.G. Yapici, I. Karaman, Z.P. Luo, Acta Mater. 54(14), 3755–3771 (2006). https://doi.org/10.1016/j.actamat.2006.04.00710.1016/j.actamat.2006.04.007 ↗
44. I.P. Jones, W.B. Hutchinson, Acta Metall. 29(6), 951–968 (1981). https://doi.org/10.1016/0001-6160(81)90049-310.1016/0001-6160(81)90049-3 ↗
45. G. Lütjering, Mater. Sci. Eng. A 243(1–2), 32–45 (1998). https://doi.org/10.1016/s0921-5093(97)00778-810.1016/s0921-5093(97)00778-8 ↗
46. M. Niinomi, Mater. Sci. Eng. A 243(1–2), 231–236 (1998). https://doi.org/10.1016/s0921-5093(97)00806-x10.1016/s0921-5093(97)00806-x ↗
47. M. Kasemer, R. Quey, P. Dawson, J. Mech. Phys. Solids 103, 179–198 (2017). https://doi.org/10.1016/j.jmps.2017.03.01310.1016/j.jmps.2017.03.013 ↗
48. S. Hémery, A. Naït-Ali, M. Guéguen, J. Wendorf, A.T. Polonsky, M.P. Echlin, J.C. Stinville, T.M. Pollock, P. Villechaise, Acta Mater. 181, 36–48 (2019). https://doi.org/10.1016/j.actamat.2019.09.02810.1016/j.actamat.2019.09.028 ↗
49. M.P. Echlin, A. Mottura, C.J. Torbet, T.M. Pollock, Rev. Sci. Instrum. 83(2), 023701 (2012). https://doi.org/10.1063/1.368011110.1063/1.3680111 ↗
50. M.P. Echlin, M. Straw, S. Randolph, J. Filevich, T.M. Pollock, Mater. Charact. 100, 1–12 (2015). https://doi.org/10.1016/j.matchar.2014.10.02310.1016/j.matchar.2014.10.023 ↗
51. M.P. Echlin, T.L. Burnett, A.T. Polonsky, T.M. Pollock, P.J. Withers, Curr. Opin. Solid State Mater. Sci. 24(2), 100817 (2020). https://doi.org/10.1016/j.cossms.2020.10081710.1016/j.cossms.2020.100817 ↗
52. S..J. Randolph, J. Filevich, A. Botman, R. Gannon, C. Rue, M. Straw, J. Vac. Sci. Technol. B 36(6), 06JB01 (2018). https://doi.org/10.1116/1.504780610.1116/1.5047806 ↗
53. J.C. Stinville, M.P. Echlin, D. Texier, F. Bridier, P. Bocher, T.M. Pollock, Exp. Mech. 56(2), 197–216 (2015). https://doi.org/10.1007/s11340-015-0083-410.1007/s11340-015-0083-4 ↗
54. H. Poulsen, Three-Dimensional X-Ray Diffraction Microscopy (Springer, Berlin, Heidelberg, 2004). https://doi.org/10.1007/b9788410.1007/b97884 ↗
55. U. Lienert, S.F. Li, C.M. Hefferan, J. Lind, R.M. Suter, J.V. Bernier, N.R. Barton, M.C. Brandes, M.J. Mills, M.P. Miller, B. Jakobsen, W. Pantleon, JOM 63(7), 70–77 (2011). https://doi.org/10.1007/s11837-011-0116-010.1007/s11837-011-0116-0 ↗
56. J. Oddershede, S. Schmidt, H.F. Poulsen, H.O. Sørensen, J. Wright, W. Reimers, J. Appl. Crystallogr. 43(3), 539–549 (2010). https://doi.org/10.1107/s002188981001296310.1107/s0021889810012963 ↗
57. M.P. Miller and P.R. Dawson: Curr. Opin. Solid State Mater. Sci., 2014, vol. 18(5), 286–299. https://doi.org/10.1016/j.cossms.2014.09.001. http://www.sciencedirect.com/science/article/pii/S1359028614000576.10.1016/j.cossms.2014.09.001 ↗
58. M.P. Miller, D.C. Pagan, A.J. Beaudoin, K.E. Nygren, D.J. Shadle, Metall. Mater. Trans. A 51A, 4360–4376 (2020). https://doi.org/10.1007/s11661-020-05888-w10.1007/s11661-020-05888-w ↗
59. H.F. Poulsen, S.F. Nielsen, E.M. Lauridsen, S. Schmidt, R.M. Suter, U. Lienert, L. Margulies, T. Lorentzen, D.J. Jensen, J. Appl. Crystallogr. 34(6), 751–756 (2001). https://doi.org/10.1107/s002188980101427310.1107/s0021889801014273 ↗
60. R.M. Suter, D. Hennessy, C. Xiao, U. Lienert, Rev. Sci. Instrum. 77(12), 123905 (2006). https://doi.org/10.1063/1.240001710.1063/1.2400017 ↗
61. E. Wielewski, D.B. Menasche, P.G. Callahan, R.M. Suter, J. Appl. Crystallogr. 48(4), 1165–1171 (2015). https://doi.org/10.1107/s160057671501113910.1107/s1600576715011139 ↗
62. M.P. Miller, J.V. Bernier, J.S. Park, A. Kazimirov, Rev. Sci. Instrum. 76(11), 113903 (2005). https://doi.org/10.1063/1.213066810.1063/1.2130668 ↗
63. J.V. Bernier, M.P. Miller, J. Appl. Crystallogr. 39(3), 358–368 (2006). https://doi.org/10.1107/s002188980600987310.1107/s0021889806009873 ↗
64. J.V. Bernier, J.S. Park, A.L. Pilchak, M.G. Glavicic, M.P. Miller, Metall. Mater. Trans. A 39A, 3120–3133 (2008). https://doi.org/10.1007/s11661-008-9639-610.1007/s11661-008-9639-6 ↗
65. E. Wielewski, D.E. Boyce, J.S. Park, M.P. Miller, P.R. Dawson, Acta Mater. 126, 469–480 (2017). https://doi.org/10.1016/j.actamat.2016.12.02610.1016/j.actamat.2016.12.026 ↗
66. P.R. Dawson, D.E. Boyce, J.S. Park, E. Wielewski, M.P. Miller, Acta Mater. 144, 92–106 (2018). https://doi.org/10.1016/j.actamat.2017.10.03210.1016/j.actamat.2017.10.032 ↗
67. M.G. Glavicic, P.A. Kobryn, T.R. Bieler, S.L. Semiatin, Mater. Sci. Eng. A 346(1–2), 50–59 (2003). https://doi.org/10.1016/s0921-5093(02)00535-x10.1016/s0921-5093(02)00535-x ↗
68. A. Kelly, G..W. Groves, Crystallography and Crystal Defects (Prentice Hall, Reading, 1970).
69. X. Song, S.Y. Zhang, D. Dini, A.M. Korsunsky, Comput. Mater. Sci. 44(1), 131–137 (2008). https://doi.org/10.1016/j.commatsci.2008.01.04310.1016/j.commatsci.2008.01.043 ↗
70. P.R. Dawson and D.E. Boyce: arXiv preprint arXiv:1504.03296 (2015).
71. R.W. Hertzberg: Deformation and fracture mechanics of engineering materials, Wiley, 1989. https://books.google.com/books?id=3LFRAAAAMAAJ.
72. K. Chatterjee, R.A. Carson, P.R. Dawson, Integr. Mater. Manuf. Innov. 8(4), 476–494 (2019). https://doi.org/10.1007/s40192-019-00158-z10.1007/s40192-019-00158-z ↗
73. K. Chatterjee, M.P. Echlin, M. Kasemer, P.G. Callahan, T.M. Pollock, P. Dawson, Acta Mater. 157, 21–32 (2018). https://doi.org/10.1016/j.actamat.2018.07.01110.1016/j.actamat.2018.07.011 ↗
74. R. Quey, P.R. Dawson, F. Barbe, Comput. Methods Appl. Mech. Eng. 200(17–20), 1729–1745 (2011). https://doi.org/10.1016/j.cma.2011.01.00210.1016/j.cma.2011.01.002 ↗
75. J.T. Oden, R. Moser, O. Ghattas, SIAM News 43(9), 1–3 (2010)
76. J.T. Oden, R. Moser, O. Ghattas, SIAM News 43(10), 1–4 (2010)
77. The Minerals Metals & Materials Society (TMS): Verification & Validation of Computational Models Associated with the Mechanics of Materials, TMS, Pittsburgh, PA, 2019. https://doi.org/10.7449/VandV_1.10.7449/VandV_1 ↗
78. O.C. Zienkiewicz, R.L. Taylor, and J.Z. Zhu: The Finite Element Method: Its Basis and Fundamentals, Elsevier, New York. 2005. https://books.google.com/books?id=YocoaH8lnx8C.
79. A.L. Pilchak, C.J. Szczepanski, J.A. Shaffer, A.A. Salem, S.L. Semiatin, Metall. Mater. Trans. A 44A, 4881–4890 (2013). https://doi.org/10.1007/s11661-013-1804-x10.1007/s11661-013-1804-x ↗
80. L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi, P. Bocher, Acta Mater. 56(16), 4298–4308 (2008). https://doi.org/10.1016/j.actamat.2008.04.06510.1016/j.actamat.2008.04.065 ↗
81. C. Cayron, Scripta Mater. 59(5), 570–573 (2008). https://doi.org/10.1016/j.scriptamat.2008.05.01310.1016/j.scriptamat.2008.05.013 ↗
82. L. Germain, N. Gey, M. Humbert, P. Bocher, M. Jahazi, Acta Mater. 53(13), 3535–3543 (2005). https://doi.org/10.1016/j.actamat.2005.03.04310.1016/j.actamat.2005.03.043 ↗
83. S.V. Zherebtsov, E.A. Kudryavtsev, G.A. Salishchev, B.B. Straumal, S.L. Semiatin, Acta Mater. 121, 152–163 (2016). https://doi.org/10.1016/j.actamat.2016.09.00310.1016/j.actamat.2016.09.003 ↗
84. I. Bantounas, D. Dye, T.C. Lindley, Acta Mater. 57(12), 3584–3595 (2009). https://doi.org/10.1016/j.actamat.2009.04.01810.1016/j.actamat.2009.04.018 ↗
85. F. Bridier, P. Villechaise, J. Mendez, Acta Mater. 56(15), 3951–3962 (2008). https://doi.org/10.1016/j.actamat.2008.04.03610.1016/j.actamat.2008.04.036 ↗
86. A. Kumar, U. Rabe, W. Arnold, Jpn. J. Appl. Phys. 47(7), 6077–6080 (2008). https://doi.org/10.1143/jjap.47.607710.1143/jjap.47.6077 ↗
87. S. Fréour, D. Gloaguen, M. François, A. Perronnet, R. Guillén, J. Appl. Crystallogr. 38(1), 30–37 (2005). https://doi.org/10.1107/s002188980402344110.1107/s0021889804023441 ↗
88. R. Quey, L. Renversade, Comput. Methods Appl. Mech. Eng. 330, 308–333 (2018). https://doi.org/10.1016/j.cma.2017.10.02910.1016/j.cma.2017.10.029 ↗
89. P.A. Shade, W.D. Musinski, M. Obstalecki, D.C. Pagan, A.J. Beaudoin, J.V. Bernier, T.J. Turner, Curr. Opin. Solid State Mater. Sci. 23(5), 100763 (2019). https://doi.org/10.1016/j.cossms.2019.07.00210.1016/j.cossms.2019.07.002 ↗
90. Integrated Computational Materials Engineering, National Academies Press, Washington, 2008. https://doi.org/10.17226/12199.10.17226/12199.10.17226/12199.10.17226/12199 ↗
91. K. Kvilekval, D. Fedorov, B. Obara, A. Singh, B.S. Manjunath, Bioinformatics 26(4), 544–552 (2009). https://doi.org/10.1093/bioinformatics/btp69910.1093/bioinformatics/btp699 ↗
92. K. Kvilekval, D. Fedorov, U. Gaur, S. Goff, N. Merchant, B.S. Manjunath, and A.K. Singh: IEEE Data Eng. Bull., 2012, vol. 35(3), p. 56–64. http://sites.computer.org/debull/A12sept/bisque.pdf.
93. A.T. Polonsky, C.A. Lang, K.G. Kvilekval, M.I. Latypov, M.P. Echlin, B.S. Manjunath, T.M. Pollock, Integr. Mater. Manuf. Innov. 8(1), 37–51 (2019). https://doi.org/10.1007/s40192-019-00126-710.1007/s40192-019-00126-7 ↗
94. M.D. Jacobsen, J.R. Fourman, K.M. Porter, E.A. Wirrig, M.D. Benedict, B.J. Foster, C.H. Ward, Integr. Mater. Manuf. Innov. 5(1), 232–244 (2016). https://doi.org/10.1186/s40192-016-0055-210.1186/s40192-016-0055-2 ↗
95. A. Jain, S.P. Ong, G. Hautier, W. Chen, W.D. Richards, S. Dacek, S. Cholia, D. Gunter, D. Skinner, G. Ceder, K.A. Persson, APL Mater. 1(1), 011002 (2013). https://doi.org/10.1063/1.481232310.1063/1.4812323 ↗
96. J.E. Saal, S. Kirklin, M. Aykol, B. Meredig, C. Wolverton, JOM 65(11), 1501–1509 (2013). https://doi.org/10.1007/s11837-013-0755-410.1007/s11837-013-0755-4 ↗